Experimental research on combined effect of obstacle and local spraying water fog on hydrogen/air premixed explosion

In order to reveal the mechanism of water fog explosion suppression and research the combined effect of water fog and obstacle on hydrogen/air deflagration, multiple sets of experiments were set up. The results show that the instability of thermal diffusion under lean combustion conditions is the main influencing factor of hydrogen/air flame surface instability, and the existence of water fog will aggravate the hydrogen/air flame surface instability. When obstacle is not considered, 8 μm, 15 μm, 30 μm water fog can significantly reduce the flame velocity and explosion overpressure of hydrogen/air, 45 μm fine water fog plays the opposite role. When considering the relative position of the water fog release position and the obstacle, the 8 μm, 15 μm, 30 μm water fog has almost no suppression effect when released near the obstacle, but a significant suppression effect occur, when using the 45 μm water fog. In the field of theoretical research, the research results not only provide an experimental basis for the fine water fog to reduce the consequences of hydrogen explosion accidents, and the optimal diameter range used by the water fog, but also provide experimental reference for the numerical simulation of hydrogen/air explosion suppression in semi-open space, and promote the development of hydrogen explosion suppression theory. In terms of engineering applications, this study can provide a theoretical basis for the layout of fire fighting equipment in the engine room of nuclear power plants or hydrogen-powered ships.     

微通道板表面羟基化工艺研究北大核心

研究了3种微通道板基底羟基化的方法,测量了羟基化处理后微通道板基底表面水接触角及通道端面的形貌变化,分析了各种方法中微通道板基底的亲水性和腐蚀情况。实验结果表明:氨水双氧水溶液对基体表面的亲水性能提升不大,NaOH溶液对基体有腐蚀作用,经食人鱼溶液处理的基体表面亲水性明显提高且无腐蚀作用。研究了微通道板在食人鱼溶液中的浸泡时间和浸泡温度对表面亲水性的影响。结果表明:随着浸泡温度的增加,微通道板表面水接触角先减小后增大,当温度为80℃时达到极小值,浸泡时间对微通道板表面的亲水性影响不大。最终确定了微通道板表面羟基化工艺:浸泡温度为80℃,静置时间为20~60 min。     

Exploring contact lens opportunities for patients above the age of 40 years

PurposeContact lenses offer a good option for patients with presbyopia, especially with improved optical designs available in modern multifocal contact lenses. Due to the ageing population there is good opportunity to increase contact lens penetration by managing these patients better. However, multifocal contact lenses achieve low penetration in the market.MethodsA questionnaire was administered to people aged above 40 years, to investigate their perceptions of contact lenses for presbyopia. Only people, with presbyopia, who were existing contact lens wearers or willing to try contact lenses were included. Participants were recruited from United Kingdom (UK), United States of America (USA), Netherlands, Germany, France, Spain and Italy.ResultsData from 1540 participants above the age of 40 years was collected, 57.9% were females and 42.1% males. Overall, 50.8% of the participants wore contact lenses, but contact lens wear was less common amongst older participants. Some data supported earlier studies, such as 6.1% wore gas permeable lenses. However, only 25% of the contact lens wearers used multifocal contact lenses. The reasons the participants wanted to wear contact lenses were similar to younger patient such as sports or cosmesis reasons. Reasons why participants had dropped out of contact lenses included discomfort and dry eye related issues. Poor visual performance with contact lenses was a reason to dropout of contact lenses for the older participants.ConclusionsThe study highlights some failings by eye care practitioners in the management of patients with presbyopia. It seems that patients of this age group are seeking suggestions and recommendations from their eye care practitioner including upgrading contact lenses and dual wear options. The day-to-day problems encountered by the contact lens wearers in this study seem to be, in the main, things that could be easily tackled by additional counselling and instruction from the eye care practitioners.     

超高效液相色谱⁃四极杆⁃飞行时间质谱对含PET食品接触材料中可迁移非挥发性物质的筛查研究

采用超高效液相色谱⁃四极杆⁃飞行时间高分辨质谱（UPLC⁃Q⁃TOF）对4类不同类型的含聚对苯二甲酸乙二醇酯（PET）材质的食品接触材料在4 %乙酸和50 %乙醇模拟物中的迁移出的非挥发性未知物进行筛查解析。结果表明，产品在4 %乙酸模拟物的迁移风险远小于50 %乙醇模拟物，主要迁移物质为聚合单体形成的寡聚物，抗氧剂、润滑剂、胶黏剂等加工助剂以及生产加工、迁移过程中形成的非有意添加物（NIAS）物质；纯PET材质的产品迁移物质较少，多层复合材料迁移物质较多。复合材质的产品中，PET材质可能在生产时添加了己二酸、癸二酸、新戊二醇等物质，进行了改性处理；此外，部分迁移物质会与模拟物中的乙醇发生反应，生成新的NIAS物质。     

Swabbing the surface: critical factors in environmental monitoring and a path towards standardization and improvement

Abstract

Cross-contamination can be broadly defined as the transfer, direct or indirect, of microorganisms from a contaminated product to a non-contaminated product. Events that may result in cross-contamination include inadequate hygiene practices, contaminated equipment surfaces, contamination via food handling personnel, further product processing, or storage abuse All of these niches require consistent environmental surveillance systems to monitor microbial harborage sites to prevent foodborne illnesses via cross-contamination. Environmental surveillance is achieved through routine surface sampling of the food contact surfaces and surrounding areas. To better understand cross-contamination, the role of environmental surface transmission during outbreaks due to the presence and persistence of pathogenic microorganisms on various food contact surfaces must be investigated. However, studies on environmental sampling techniques are rarely performed in an actual food processing environment but rather under controlled variables within a laboratory-setting. Moreover, results and conclusions of studies differ because of the considerable variability across surface sampling tools due to individual operator dependency, low recovery rates, and low reproducibility. Information is also often lacking on environmental sampling tools used within a processing facility, the characterization of these tools, and the optimization of recovery of microorganisms for surface sampling. Thus, this review aims to: (1) discuss and compare factors impacting the recovery of microorganisms and the standardization of surface sampling methods for optimal recovery of microorganisms and (2) examine how research strategies could focus more towards the development of standard methodologies for surface sampling.     

煤尘爆炸固态产物的矿物质特性研究

利用20 L球形爆炸装置对来自老虎台和新密矿区的2种煤尘进行爆炸实验，并对其爆炸固态产物进行收集分析。采用X射线衍射技术对2个矿区的煤尘原样和爆炸固态产物的矿物质特性进行分析研究。研究发现，煤尘爆炸后，爆炸固态产物中挥发分和固定碳等有机组分较煤尘原样均明显减少，而主要由矿物质组成的灰分却明显增加;矿物质物相定性和定量分析结果表明，煤尘原样主要由高岭石、石英等常见矿物质组成;爆炸固态产物中的矿物质组成和含量均发生了明显变化，主要由稳定、耐高温的硅酸盐矿物和氧化物矿物组成;且通过对矿物质演化行为的分析认为煤尘爆炸固态产物应该是一种掺杂有部分煤尘原样颗粒的混合物,且与煤尘原样中的矿物质存在一定的转化关系。     

微间隙共形圆柱接触力模型的适用性分析

针对目前间隙铰接副接触力模型无法有效表述不同材料耗散阻尼效应,以及不适用于微间隙共形接触的问题,分析各种接触力模型中弹性接触力和耗散阻尼力计算方法的优缺点,提出一种普适性的圆柱内接触力分析模型。该模型将接触力描述为接触深度的显式函数,并将其适用范围有效地扩展至微间隙和低恢复系数工况。采用含间隙铰接副的曲柄-滑块机构进行动力学分析,对所提出接触力进行验证,计算结果表明:所提出的普适性接触力模型体现了微间隙时更高的接触刚度和低恢复系数时显著的阻尼效应,从而可为不同材料和间隙尺寸的间隙铰接副力学分析提供更为完备的计算模型。