Co-precipitation synthesis of CeVO4 nanoparticles for electrochemical hydrogen storage

Journal of Materials Science: Materials in Electronics - In this study, cerium vanadate (CeVO4) nanoparticles were synthesized using ammonium metavanadate and cerium (III) nitrate hexahydrate as...     

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers**

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G’) of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.     

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

The impact of graphite nanoplatelets (GNPs) on the physical and mechanical properties of cementitious nanocomposites was investigated. A market-available premixed mortar was modified with 0.01% by weight of cement of commercial GNPs characterized by two distinctively different aspect ratios.The rheological behavior of the GNP-modified fresh admixtures was thoroughly evaluated. Hardened cementitious nanocomposites were investigated in terms of density, microstructure (Scanning Electron Microscopy, SEM and micro–Computed Tomography, μ-CT), mechanical properties (three-point bending and compression tests), and physical properties (electrochemical impedance spectroscopy, EIS and thermal conductivity measurements). At 28 days, all GNP-modified mortars showed about 12% increased density. Mortars reinforced with high aspect ratio GNPs exhibited the highest compressive and flexural strength: about 14% and 4% improvements compared to control sample, respectively. Conversely, low aspect ratio GNPs led to cementitious nanocomposites characterized by 36% decreased electrical resistivity combined with 60% increased thermal conductivity with respect to the control sample.     

Delivery of cisplatin by folic acid-targeted liposomal nanoparticles into liver cancer cell line

This study aimed to prepare cisplatin-loaded PEGylated liposomal nanoparticles targeted with folic acid and evaluate their efficacy on liver cancer cell line PLC/PRF/5 (Alexander hepatoma cell line). Nanoparticles were prepared by reverse phase evaporation technique and characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, inductively coupled plasma optical emission spectrometry, Fourier transform infrared spectroscopy, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide techniques. Nanoscale particles with appropriate drug encapsulation efficiency (13%) were prepared. Cytotoxicity results indicated that the superior potency of targeted cisplatin-loaded nanoparticles compared to the nontargeted counterpart with 23% more cytotoxicity. Findings of this study confirmed the potency of targeted PEGylated liposomal nanoparticles.     

Thin natural gelatin/chitosan nanofibrous scaffolds for retinal pigment epithelium cells

Damage of the retinal pigmented epithelial cells causes various diseases such as age-related macular degeneration in retinal tissue. Nowadays, scientists are attempting to replace lost retinal cells with healthy and efficient cells that provide better conditions for recovering and preventing blindness. In this study, gelatin/chitosan nanofibrous scaffolds with mean diameters of 180?nm were fabricated for subretinal space through electrospinning. Thickness and morphology of the gelatin–chitosan scaffolds were analyzed by scanning electron microscopy (SEM). The results showed that the high rate of degradation, i.e., 90% damage was obtained after 1 month. The cell viability of gelatin/chitosan nanofibers were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The SEM results of cultured RPE on gelatin/chitosan scaffolds showed the appropriate adhesion of cells on the substrate. The results of the identity of RPE cells cultured on the scaffolds indicated that a large number of cells strongly expressed RPE65 and cytokeratin 8/18.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

The control of abnormal grain growth in low-voltage SnO2 varistors by microseed addition

In this research, the addition effects of three different quantities of micron-sized seeds (microseeds) to a SnO₂ varistor prepared from nanomaterials on the microstructure and electrical properties were studied. Moreover, surge-withstanding capability of low-voltage SnO₂ varistors was investigated. The X-ray diffraction pattern disclosed a single phase SnO₂ for microseed grains. The morphological features of samples were characterized using scanning electron microscopy. The abnormal distribution of grain size with elongated grains of SnO₂ in fine grains matrix was observed in sintered samples without microseeds. The low content of microseed addition (0.3 wt%) had not controlled abnormal grain growth, however, it increased mean grain size to 37 µm. Although the high content of microseeds (7.5 wt%) stopped abnormal grain growth, it had a negative effect on relative density and mean grain size. The normal grain size distribution with maximum mean grain size (45 µm) was obtained in samples containing 1.5 wt% microseeds. These samples showed the lowest breakdown field (240 V/cm) and the highest surge-withstanding capability (1.5 kA/cm²). Furthermore, the standard deviation of the electrical parameters of these samples was improved due to normal grain-size distribution.     

Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

Synthesis of Poly (Vinylidene Fluoride)/Modified SBA-15 Nanoparticles Composite Membrane for Water Purification

One of the methods of pollution separating from urban and industrial wastewater is the use of composite membranes based on polymer. The modified composite