Combining a new baseboard radiator with a fan coil system for improving heating performance and reduce energy consumption

In the present work, the heating performance of a new system combined with a new modified baseboard radiator and fan coil is investigated. Using longitudinal fins with special geometry and also forced airflow at the end of the system causes that at the lower inlet water temperature compared with the conventional models, higher heat output rate be obtained. The heat output rate of the new modified system is obtained by experimental metrology based on the European Standard No. EN-442. Temperature and velocity distribution in the room space is done by simulation of the modified system in the Flovent software. Computational fluid dynamics (CFD) results are validated against experimental results and there is a good agreement between them. Also, the energy consumption of the system during the winter season is calculated in TRANSYS software. Experimental results show that the heat output rate of a new modified heating system with inlet water temperature in the range of 45–55°C is on average 4.17 times higher compared with the conventional model. CFD simulation also showed that the combined system provides good thermal comfort conditions. Energy consumption of the new system reduced about 13% compared with conventional models.     

Deep-Learning Based DOA Estimation in the Presence of Multiplicative Noise

Wireless Personal Communications - The paper addresses the narrowband direction of arrival estimation problem in the presence of multiplicative noise, namely, the local scatterers affect the...     

A Statistical Model for Early Detection of DDoS Attacks on Random Targets in SDN

Wireless Personal Communications - Software Defined Networks (SDNs) have accelerated and simplified the management, configuration and error detection in today’s networking systems. However,...     

Nanoraspberry-like palladium/spongy nickel oxide for electrooxidation of five light fuels

The spongy nickel oxide (SNO) was synthesized the solution combustion method. The SNO was selected as a promoter to boost the catalytic activity of nanoraspberry-like palladium (NRPd) toward electrooxidation of five light fuels (LFs): methanol, ethanol, formaldehyde, formic acid, and ethylene glycol. The X-ray powder diffraction, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy, and field emission scanning electron microscope techniques were used for the materials characterization. In comparison with nonpromoted Pd, the NRPd-SNO electrocatalyst shown an excellent efficiency in parameters like the electrochemical active surface area and anti-CO poisoning behavior. The turnover data and the parameters, including reaction order, activation energy, and the coefficients of electron transfer and diffusion, were evaluated for the each process of LFs electrooxidation. The outcome for NRPd-SNO activity toward LFs electrooxidation was compared to some reported electrodes. The SNO increases the removal of intermediates created in the oxidation of LFs that can poison the surface of palladium catalyst. This is due to the presence of the lattice oxygens in SNO structure and Ni switching between its high and low valances. The compatibility of the adsorption process of LFs on the surface of the NRPd-SNO catalyst with different isotherms was determined by studying the Tafel polarization and calculating the surface coverage.     

NIR-Laser Triggered Drug Release from Molybdenum Disulfide Nanosheets Modified with Thermosensitive Polymer for Prostate Cancer Treatment

Journal of Inorganic and Organometallic Polymers and Materials - In the present study, the thermosensitive polymers were successfully grown on the surface of molybdenum disulfide nanosheets (MNs)...     

Study of Corrosion Behavior and In Vitro Bioactivity of Single NbSi2 and Duplex NbSi2/Nb5Si3 Coatings on Nb Substrates for Biomedical Applications

Protection of Metals and Physical Chemistry of Surfaces - Single NbSi2 and duplex NbSi2/Nb5Si3 coatings were successfully applied on Nb substrates using halide activated pack cementation (HAPC)...     

A techno-economic review of biomass gasification for production of chemicals

Gasification is a thermochemical process which can be used as a low-emission and highly efficient method to produce syngas and chemicals such as biomethanol and dimethyl ether (DME). In this paper, a review of technologies and methods for economic production of chemicals through gasification of biomass and other fuels has been carried out. A variety of techno-economic studies and analysis have been proposed in order to better understand the technical and economic assessments during the biomass gasification. Results showed that the methanol production cost for biomass (wood) is from 195 to 935 €/t, for waste residues is from 200 to 930 €/t, for coal is from 160 to 480 €/t, and for natural gas is from 90 to 290 €/t. It also concluded that fuel (wood) cost has positive linear relationship with ethanol production cost, meaning as the feedstock cost increases from 30 to 50 $/day-ton, the ethanol production cost enhances from 1.66 to 1.95 $/gal.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.