MHD mixed convection of a Cu–water nanofluid flow through a channel with an open trapezoidal cavity and an elliptical obstacle

In the current work, numerical simulations are achieved to study the properties and the characteristics of fluid flow and heat transfer of (Cu–water) nanofluid under the magnetohydrodynamic effects in a horizontal rectangular canal with an open trapezoidal enclosure and an elliptical obstacle. The cavity lower wall is grooved and represents the heat source while the obstacle represents a stationary cold wall. On the other hand, the rest of the walls are considered adiabatic. The governing equations for this investigation are formulated, nondimensionalized, and then solved by Galerkin finite element approach. The numerical findings were examined across a wide range of Richardson number (0.1 ≤ Ri ≤ 10), Reynolds number (1 ≤ Re ≤ 125), Hartmann number (0 ≤ Ha ≤ 100), and volume fraction of nanofluid (0 ≤ φ ≤ 0.05). The current study's findings demonstrate that the flow strength increases inversely as the Reynolds number rises, which pushes the isotherms down to the lower part of the trapezoidal cavity. The Nu_avg rises as the Ri rise, the maximum Nu_avg = 10.345 at Ri = 10, Re = 50, ϕ = 0.05, and Ha = 0; however, it reduces with increasing Hartmann number. Also, it increase by increasing ϕ, at Ri = 10, the Nu_avg increased by 8.44% when the volume fraction of nanofluid increased from (ϕ = 0–0.05).     

Method for calculating horizontal drain induced non-linear and large strain degree of consolidation

Consolidating dredged clay slurries using a combination of vacuum pressure and prefabricated horizontal drains (PHDs) is widely used in practice. This is a large strain problem, but there is no existing large strain theory for PHD induced consolidation. A method with explicit equations has been proposed to consider both mechanical and geometrical non-linearities in analyzing PHD induced consolidation. The method considers stepwise variation of properties using imaginary time concept. An imaginary time is determined by the condition of continuity of degree of consolidation before and after changing the properties. Then the method was applied to analyze a large scale model test of vacuum consolidation with PHD. Two analyses were conducted. One considered both the mechanical and geometrical non-linearity (large strain), and another only considered mechanical non-linearity (small strain). The results of large strain analysis agree with the measured settlement curve and excess pore pressures well. While the small strain analysis under-estimated the rate of consolidation significantly. The results from this study indicate that for analyzing PHD induced consolidation of clay slurries considering the effect of large strain is important, and the proposed method can be a useful design tool.     

Acquisition and Spread of Antimicrobial Resistance: A tet(X) Case Study

Understanding the mechanisms leading to the rise and dissemination of antimicrobial resistance (AMR) is crucially important for the preservation of power of antimicrobials and controlling infectious diseases. Measures to monitor and detect AMR, however, have been significantly delayed and introduced much later after the beginning of industrial production and consumption of antimicrobials. However, monitoring and detection of AMR is largely focused on bacterial pathogens, thus missing multiple key events which take place before the emergence and spread of AMR among the pathogens. In this regard, careful analysis of AMR development towards recently introduced antimicrobials may serve as a valuable example for the better understanding of mechanisms driving AMR evolution. Here, the example of evolution of tet(X), which confers resistance to the next-generation tetracyclines, is summarised and discussed. Initial mechanisms of resistance to these antimicrobials among pathogens were mostly via chromosomal mutations leading to the overexpression of efflux pumps. High-level resistance was achieved only after the acquisition of flavin-dependent monooxygenase-encoding genes from the environmental microbiota. These genes confer resistance to all tetracyclines, including the next-generation tetracyclines, and thus were termed tet(X). ISCR2 and IS26, as well as a variety of conjugative and mobilizable plasmids of different incompatibility groups, played an essential role in the acquisition of tet(X) genes from natural reservoirs and in further dissemination among bacterial commensals and pathogens. This process, which took place within the last decade, demonstrates how rapidly AMR evolution may progress, taking away some drugs of last resort from our arsenal.     

From Oxadiazole to Triazole Analogues: Optimization toward a Dual Orexin Receptor Antagonist with Improved in vivo Efficacy in Dogs

The orexin system is responsible for regulating the sleep-wake cycle. Suvorexant, a dual orexin receptor antagonist (DORA) is approved by the FDA for the treatment of insomnia disorders. Herein, we report the optimization efforts toward a DORA, where our starting point was (5-methoxy-4-methyl-2-[1,2,3]triazol-2-yl-phenyl)-{(S)-2-[5-(2-trifluoromethoxy-phenyl)-[1,2,4]oxadiazol-3-yl]-pyrrolidin-1-yl}methanone ( 6 ), a compound which emerged from our in-house research program. Compound 6 was shown to be a potent, brain-penetrating DORA with in vivo efficacy similar to suvorexant in rats. However, shortcomings from low metabolic stability, high plasma protein binding (PPB), low brain free fraction (f_u brain), and low aqueous solubility, were identified and hence, compound 6 was not an ideal candidate for further development. Our optimization efforts addressing the above-mentioned shortcomings resulted in the identification of (4-chloro-2-[1,2,3]triazol-2-yl-phenyl)-{(S)-2-methyl-2-[5-(2-trifluoromethoxy-phenyl)-4H-[1,2,4]triazol-3-yl]-pyrrolidin-1-yl}l-methanone ( 42 ), a DORA with improved in vivo efficacy compared to 6 .     

基于双声表面波器件的引信加速度传感器

In view of the shortcomings of silicon micro acceleration sensor based on piezoresistive effect and capacitance principle, such as temperature drift, low resolution and poor anti-interference ability, a fuze acceleration sensor based on dual SAW devices is proposed. The sensor adopts a dual saw device structure, one is coated with a sensitive film for measurement, the other is an uncoat- ed reference channel for compensation of environmental temperature, pressure, humidity and other factors. The experimental results show that the maximum linear error is only 1.6%, the sensitivity is 54.3Hz/g, and the maximum hysteresis error is less than 1%. Compared with piezoresistive accelerometer and capacitive accelerometer, the linear error of the accelerometer is small, the sensitivi- ty is high, and it has strong anti-interference ability.     

纵轴式掘进机截割头载荷影响因素的仿真分析

针对现有掘进机截割头载荷特性研究方法采用单一影响因素不能全面反映截割头载荷及其波动变化规律的问题,通过分析截割头瞬时载荷,确定了纵轴式掘进机在水平截割工况下截割头载荷的主要影响因素有截割岩石特性、截割头掏槽深度、截割头吃刀深度、截割头转速和截割臂摆速。针对某纵轴式掘进机水平截割工况,采用Matlab对影响截割头载荷的多种因素进行仿真分析,得到了各向载荷及其波动随各因素的变化规律:截割头载荷随着岩壁普氏系数的增大而增加,其中横向阻力增加尤为明显,横向阻力波动程度高于其他方向载荷,且随着岩壁普氏系数的增大呈减小趋势;随着截割头掏槽深度的增加,截割头各向载荷近似呈线性增加,其中升力增加幅度最大,各向载荷波动则随着截割头掏槽深度的增大而减小;随着吃刀深度的增加,截割头载荷总体呈增大趋势,载荷波动程度则随之减小;在截割头转速一定的情况下,截割头载荷均随着截割臂摆速的增加而增大,在同一摆速下,截割头载荷随着截割头转速的减小而增大,横向阻力波动明显高于升力和推进阻力波动,横向阻力和推进阻力波动按截割头载荷规律变化,升力波动则与之相反。截割头载荷波动变化规律与截割头载荷变化规律不尽一致,有时甚至相互冲突。因此,掘进机作业过程中应合理选择截割头掏槽深度、吃刀深度等操作参数和截割头转速、截割臂摆速等运动参数,使各参数相互匹配,以减小掘进机振动,延长使用寿命。     

Enzymolysis reaction kinetics and thermodynamics of rapeseed protein with sequential dual‐frequency ultrasound pretreatment

We evaluated the effect of sequential dual‐frequency ultrasound (SDFU) pretreatments on rapeseed protein enzymolysis, using alcalase as a model enzyme. Hydrolysed protein concentrations, enzymolysis kinetics and thermodynamic parameters were investigated. The results showed that the hydrolysed rapeseed protein concentration following SDFU pretreatments was higher compared to that of the control for up to 75 min of enzymolysis at various substrate concentrations of 5–25 g L^?1; both control and SDFU pretreatment groups showed first‐order reaction kinetics. Compared to the control, the Michaelis–Menten constant (K_M) value decreased remarkably by 17.61%, while an increase in the binding frequency between enzyme and substrate (K_A) by 10.47% was observed. The thermodynamic parameters, enthalpy, entropy and activation energy were reduced in the SDFU pretreatment group compared to the control by 31.78%, 18.0% and 29.56%, respectively. SDFU pretreatment showed little effect on Gibbs free energy at the various temperatures studied.     

大埋深高应力低渗透煤层气资源高效开发技术探索和实践

为实现沁水盆地大埋深、高应力、低渗透煤层气资源的高效开发,本文以郑庄-里必区块深部煤层气储层为研究对象,剖析了直井、多分支水平井和L型水平井的开发效果及适应性,确定了L型水平井连续油管拖动压裂开发工艺,考察和评价了开发效果。实践结果表明:深部高地应力及其非均质性限制了直井和多分支水平井的产能,而L型水平井连续油管拖动压裂开发工艺克服了高地应力及其各向异性,实现了应力重构,强化了水平井筒和缝网系统的有效连通,能够在埋深大于700m的储层中获得较好的产气效果,单井最高产量达到25 000m3/d,创造了大埋深、高应力、低渗透储层条件下的单井产气量记录。     

压裂水平井产能预测方法研究进展

水平井压裂技术在低渗透及非常规储层中得到了广泛应用,压裂后水平井的产能预测关系到油田开发方案的制定,因此,国内外学者对压后渗流模型的建立和求解方法做出了不懈的努力。本文详细回顾了国内外学者所建压裂水平井产能预测模型及求解方法,指出了不同模型和求解方法的优缺点,并展望了压裂水平井产能模型的发展方向。     

相界面对双相钛合金层裂孔洞形核的影响

利用一级轻气炮对TC4双相钛合金进行加载, 获得初期的层裂状态, 在加载中采用多普勒激光干涉测速技术对样品自由面粒子速度进行测试。在软回收经过加载的样品之后, 借助于金相显微镜、X射线断层扫描、纳米压痕等检测手段进行多维分析, 探讨了相界面对孔洞形核位置的影响。结果表明, 孔洞绝大部分都在α相内形核, 而不是如准静态损伤理论预测的形核于α/β相界面。这是由于相界面的反射与透射作用, 当冲击波从高阻抗α相传入到低阻抗β相时, 会在α相内产生拉伸脉冲, 当拉伸脉冲足够大时, 导致在α相内产生孔洞。