Synthesis of Hollow Three-Dimensional Channels LiNi_(0.5)Mn_(1.5)O_4 Microsphere by PEO Soft Template Assisted with Solvothermal Method

A appropriate size with three-dimension(3 D) channels for lithium diffusion plays an important role in constructing highperforming LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode materials, as it can not only reduce the transport path of lithium ions and electrons, but also reduce the side effects and withstand the structural strain in the process of repetitive Li~+ intercalation/deintercalation. In this work, an e fficient method for designing the hollow LNMO microsphere with 3 D channels structure by using polyethylene oxide(PEO) as soft template agent assisted solvothermal method is proposed. Experimental results indicate that PEO can make the reagents mingle evenly and nucleate slowly in the solvothermal process, thus obtaining a homogeneous distribution of carbonate precursors. In the final LNMO products, the hollow 3 D channels structure obtained by the decomposition of PEO and carbonate precursor in the calcination can provide abundant electroactive zones and electron/ion transport paths during the charge/discharge process, which benefits to improve the cycling performance and rate capability. The LNMO prepared by adding 1 g PEO possesses the most outstanding electrochemical performance, which presented an excellent discharge capacity of 143.1 mAh g~(-1) at 0.1 C and with a capacity retention of 92.2% after 100 cycles at 1 C. The superior performance attributed to the 3 D channels structure of hollow microspheres, which provide uninterrupted conductive systems and therefore achieve the stable transfer for electron/ion.     

Preparation of P(St-NMA) microsphere inks and their application in photonic crystal patterns with brilliant structural colors

Patterned photonic crystals with structural colors on textile substrates have attracted a special attention due to the great advantages in application, which currently become a research hot-spot. This study utilized an ink-jet printing technology to prepare high-quality photonic crystal patterns with structural colors on polyester substrates. The self-assembly temperature of poly(styrene-N-methylol acrylamide) (P(St-NMA)) microspheres set to construct photonic crystals were deeply optimized. Moreover, the structural colors of prepared photonic crystal patterns were characterized and evaluated. When the mass fraction of P(St-NMA) microspheres was 1.0 wt.%, the pH value ranged from 5 to 7, and the surface tension was in the range of 63.79 to 71.20 mN/m, inks could present the best print performance. At 60 °C, prepared P(St-NMA) microsphere inks were good for printing to obtain patterned photonic crystals with regular arrangement and beautiful structural colors. Specifically, photonic crystals with different colors could be constructed by regulating the diameter of microspheres in inks, and prepared structural colors exhibited distinct iridescent phenomenon. The present results could provide a theoretical basis for the industrial realization of patterned photonic crystals by ink-jet printing technology.     

溶剂热合成多级ZnO微球及其光催化降解苯酚

以乙二醇为溶剂,KAc为助剂,采用溶剂热法合成多级ZnO微球。通过改变反应温度来调控ZnO微球形貌,并对合成的ZnO微球进行XRD、SEM、PL和UV-Vis DRS等表征分析。结果表明,合成的ZnO为六方纤锌矿晶体结构,由短纳米棒自组装成多级微球。在紫外-可见光照射下,ZnO表现出优异的光催化降解苯酚活性,180℃合成的ZnO样品光催化活性明显优于其他温度合成的样品。用0.1 g的ZnO降解100 mL浓度为5 mg·L~(-1)的苯酚溶液,光照150 min降解率达94.5%。多级ZnO微球光催化性能的提高可推测为较窄的禁带宽度(3.08 eV)有利于吸收光子,较小的晶粒尺寸(25.38 nm)、粗糙的表面以及中空结构有利于反应液与催化剂表面的充分接触。此外,由捕获实验证实光催化降解苯酚的机理是羟基(·OH)为主要的活性自由基,在苯酚降解过程中起主要作用。     

Determination of mechanical properties of polymeric microspheres used in controlled drug delivery systems by nanoindentation

In this study, we synthesized poly (vinyl acetate-co-divinyl benzene) microspheres with various monomer/cross-linker contents for oral/topical sustained drug release applications and determined the micromechanical properties by nanoindentation. Compression elastic moduli of materials were calculated by using the limited depth of indentation according to Hertz elastic deformation model and presented as the histogram of multiple data. In terms of drug release practices, poly (VAc-co-DVB) microspheres with a high DVB content, especially in topical applications, are expected to carry drugs under mechanical stresses of less than 1.0 GPa.     

Ni2V2O7 dandelion microsphere for a high-performance electrocatalyst in water splitting

Water splitting is an effective way to produce hydrogen to solve the energy crisis problem, and inorganic metal compounds are widely used in electrocatalysis field due to efficient hydrogen evolution reaction (HER). Herein, we synthesize Ni₂V₂O₇ dandelion microsphere from nickel nitrate and vanadium pentoxide by “one-step hydrothermal” way, which exhibits large specific surface area of 102.74 m² g⁻¹. The as-prepared Ni₂V₂O₇ microsphere shows good electrocatalysis performances including OER overpotential of 358 mV and good stability, as well as HER overpotential of 195 mV. Furthermore, the Ni₂V₂O₇ microsphere electrode is assembled to Ni₂V₂O₇ microsphere//Ni₂V₂O₇ microsphere system, showing the water splitting voltage of 1.50 V at 10 mA cm⁻² by two-electrode method, which is much lower than those of commercial RuO₂//Pt/C system and most of spinel oxides electrocatalysts. Our work opens up a new and facile avenue for fabricating inorganic microsphere electrocatalyst in hydrogen production field.     

pH-sensitive self-assembling property of poly(ethyleneimine)/cinnamic acid mixture and its effect on pH-dependent release of monoolein cubic phase

Poly(ethyleneimine) (PEI)/cinnamic acid (CA) mixture was self-assembled into microsphere in aqueous phase. As the pH value increased, the self-assembly became hardly formed. As the molar ratio of the amino group of PEI to the carboxyl group of CA increased, the pH window for the formation of self-assembly became broader. The phase transition temperature of cubic phase was 58.5–67.5°C, depending on the PEI/CA content. The release of dye loaded in cubic phase containing PEI/CA increased in a first-order fashion. The release degree was higher at a lower pH value.     

Carbonaceous microsphere-based superabsorbent polymer as filler for coating of NPK fertilizer: Fabrication,properties, swelling,and nitrogen release characteristics

Recently, the use of controlled release fertilizers in agriculture has resulted in huge benefits in plant growth and cultivation. Superabsorbent polymer (SAP)-coated fertilizers have the added advantage in retaining water in soil after irrigation and also reduce the nutrient release rate from soil in a controlled manner. This study aimed to produce a nitrogen–phosphorus–potassium (NPK) fertilizer coated with superabsorbent carbonaceous microspheres polymer (SPC) by inverse suspension polymerization method with water-retention and controlled release properties. Two sets of experiments were conducted: (1) three different weight percentages and (2) different materials. NPK coated with SPC showed increasing water-retention ability with respect to carbon microsphere percentages and retains >80% water at the 30th day of experiment compared with pure NPK and NPK coated with SAP. The slow release behavior of all samples was investigated by induced coupled plasma mass spectrometry spectrometry and results showed that NPK coated with SAP and SPC has a low release rate with <50% nutrient release compared with uncoated NPK at the 30th day. The release mechanism kinetics of NPK coated with SAP and SPC were studied based on the Kosmeyer–Peppas model. The mechanisms approached Fickian diffusion-controlled release as the n value for both samples was less than 0.5. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48396.     

One‐pot synthesis of self‐stabilized and carboxyl‐functionalized fluorescent poly(methyl methacrylate) microspheres covalently dyed with tris(8‐hydroquinolinato)aluminium by dispersion polymerization

The dispersion polymerization of methyl methacrylate (MMA) with fluorescent monomer tris[2‐((8‐hydroxyquinolin‐5‐yl)methoxy)ethyl methacrylate]aluminium (Al‐HQHEMA) was investigated to obtain fluorescent microspheres under varying conditions (such as composition of dispersion medium, and content of stabilizer polyvinylpyrrolidone (PVP) and Al‐HQHEMA) in methanol–water at 70 °C with 2,2′‐azoisobutyronitrile as the initiator. Fluorescent microspheres with particle size of 2.039 µm and uniformity of 0.171 were obtained under the following conditions: methanol–water, 7:3 (v/v); PVP, 15 wt% of MMA; Al‐HQHEMA solution, 1.5 mL. Maleic monoester of monomethoxyl poly(ethylene glycol) (Mal‐MPEG) was used as a comonomer to simultaneously incorporate carboxyl groups and PEG chains. With Mal‐MPEG, no aggregation was observed in the measurements of particle size and size distribution for the obtained microspheres after cleaning off PVP, indicating that self‐stabilized fluorescent microspheres were obtained. While without Mal‐MPEG, obvious aggregation was observed. The determination of surface carboxyl content using aqueous acid–base titration showed that most of the carboxyl groups of Mal‐MPEG were located on the surface of the microspheres. © 2015 Society of Chemical Industry     

Enhanced photoelectrochemical water splitting using gadolinium doped titanium dioxide nanorod array photoanodes

In this study highly oriented, rutile phase one dimensional Titania nanorod array (TiO₂ NRA) modified by gadolinium doping were synthesized on the conductive glass substrate (FTO) by the hydrothermal method. The effect of Gd doping on the photoelectrochemical performance of TiO₂ NRA was investigated. Crystal phase, structural, morphological and composition characteristics of these synthesized photoelectrodes were analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), and atomic force microscopy (AFM). FE-SEM images clearly show that some of the Gd dopant is uniformly distributed on the surface of TiO₂ NRA in the form Gadolinia (Gd₂O₃) microsphere. These gadolinia microsphere play an important role in reducing the surface recombination of electron and hole supported by photoluminescence's studies. Linear sweep voltammetry results show that Gd doping results in a two-fold increase in photocurrent density as compared to pristine TiO₂ NRA. UV–visible spectra, and Mott-Schotty measurements show that Gd doping shift the flat-band potential of TiO₂ NRA more toward negative potential that results in effective charge separation and transportation in the Gd doped TiO₂ NRA (Gd@TiO₂ NRA). Applied biased photon to current efficiency (ABPE) equation was used to find solar to hydrogen efficiency (STH). Gd@TiO₂ NRA show optimum conversion efficiency of ~0.64% at 0.03 V vs Ag/AgCl, while pristine TiO₂ NRA display ~0.33% at −0.21 V vs Ag/AgCl.