Generalized differential quadrature analysis of MHD mixed convective motion of Casson fluids past an isothermal irregular slender geometry via Cattaneo–Christov's approach

Classical Fourier's theory is well-known in continuum physics and thermal sciences. However, the primary drawback of this law is that it contradicts the principle of causality. To explore the thermal relaxation time characteristic, Cattaneo–Christov's theory is adopted thermally. In this regard, the features of magnetohydrodynamic (MHD) mixed convective flows of Casson fluids over an impermeable irregular sheet are revealed numerically. In addition, the resulting system of partial differential equations is altered via practical transformations into nonlinear ordinary differential equations. An advanced numerical algorithm is developed in this respect to get higher approximations for temperature and velocity fields, as well as their corresponding wall gradients. For validating our numerical code, the current outcomes are compared with the available literature results. Moreover, it is revealed that the velocity field is more prominent in the suction flow situation as compared with the injection flow case. It is also found that the Casson fluid is hastened in the case of lower yield stress. Larger values of thermal relaxation parameters create a lessening trend in the temperature distribution and its related boundary layer breadth.     

MHD mixed convection of a Cu–water nanofluid flow through a channel with an open trapezoidal cavity and an elliptical obstacle

In the current work, numerical simulations are achieved to study the properties and the characteristics of fluid flow and heat transfer of (Cu–water) nanofluid under the magnetohydrodynamic effects in a horizontal rectangular canal with an open trapezoidal enclosure and an elliptical obstacle. The cavity lower wall is grooved and represents the heat source while the obstacle represents a stationary cold wall. On the other hand, the rest of the walls are considered adiabatic. The governing equations for this investigation are formulated, nondimensionalized, and then solved by Galerkin finite element approach. The numerical findings were examined across a wide range of Richardson number (0.1 ≤ Ri ≤ 10), Reynolds number (1 ≤ Re ≤ 125), Hartmann number (0 ≤ Ha ≤ 100), and volume fraction of nanofluid (0 ≤ φ ≤ 0.05). The current study's findings demonstrate that the flow strength increases inversely as the Reynolds number rises, which pushes the isotherms down to the lower part of the trapezoidal cavity. The Nu_avg rises as the Ri rise, the maximum Nu_avg = 10.345 at Ri = 10, Re = 50, ϕ = 0.05, and Ha = 0; however, it reduces with increasing Hartmann number. Also, it increase by increasing ϕ, at Ri = 10, the Nu_avg increased by 8.44% when the volume fraction of nanofluid increased from (ϕ = 0–0.05).     

“电路分析”课程混合式教学探索与实践

本文以“电路分析”课程为例，借助云班课平台，采用“SPOC”与“BOPPPS”相结合的混合式教学模式，开展探究式、个性化、参与式教学。形成了“学生中心，产出导向，持续改进”闭环。经过近年来的不断改进，课程建设已初步完成。通过对三届学生的教学实践，发现采用“SPOC+BOPPPS”的线上线下混合式教学模式，学生学习积极性、主动性明显增强，同时学习效果也得到了显著提升。     

多铜氧化酶在大肠杆菌中的分泌表达

生物胺是存在于发酵食品中的一类有机物，过量摄入会危害人体健康。多铜氧化酶中的某些酶具有降解多种生物胺的活性，在减控发酵食品中的氨(胺)类危害物方面具有良好的应用前景。研究多铜氧化酶的分泌表达，对酶的特性改造和工业化生产与应用具有重要意义。本研究通过在解淀粉芽孢杆菌来源的多铜氧化酶N端融合信号肽PhoA实现了多铜氧化酶在大肠杆菌中的分泌表达，胞外酶活为69.8 U/L。通过优化诱导条件和酶的分泌确定了多铜氧化酶最优发酵条件为诱导温度25℃、IPTG浓度0.05 mmol/L、诱导时菌体OD600=1.0、诱导6 h后添加150 mmol/L甘氨酸；发酵40 h时胞外多铜氧化酶酶活达到238.1 U/L，是优化前的3.4倍。     

An iterative approach for the discrete‐time dynamic control of Markov jump linear systems with partial information

The , and mixed dynamic output feedback control of Markov jump linear systems in a partial observation context is studied through an iterative approach. By partial information, we mean that neither the state variable x(k) nor the Markov chain θ(k) are available to the controller. Instead, we assume that the controller relies only on an output y(k) and a measured variable coming from a detector that provides the only information of the Markov chain θ(k). To solve the problem, we resort to an iterative method that starts with a state‐feedback controller and solves at each iteration a linear matrix inequality optimization problem. It is shown that this iterative algorithm yields to a nonincreasing sequence of upper bound costs so that it converges to a minimum value. The effectiveness of the iterative procedure is illustrated by means of two examples in which the conservatism between the upper bounds and actual costs is significantly reduced.     

Mathematical formulation and heuristic algorithms for optimisation of auto-part milk-run logistics network considering forward and reverse flow of pallets

The operational planning of distribution network for automotive industry is complex with many conditions to consider, including heterogeneous fleet, enforcing the feasibility of 3D-packing of pallets into vehicles to address the vehicle's capacity in terms of weight and volume, compatibility of orders in a vehicle, returning empty pallets from assembly-plants backwards to suppliers, and delivery time windows. A mathematical model (MILP) is proposed that takes account of these conditions to minimise total transportation costs. The network structure can be a combination of direct shipment and milk-run for both forward and reverse flow of pallets. The model is solved optimally for small-size problems. For solving larger problems, a heuristic algorithm (in two versions) is proposed that uses a similarity measure to generate a reasonable list of orders. Best/first-fit strategies are employed to generate a feasible solution with the aid of a relaxed version of the proposed MILP. Improvement heuristics are also designed. Unlike most of existing constructive heuristics, our aim for developing the heuristic approach is to force routing decision, with all of its considerations, being made optimal. We also use the proposed best-fit strategy in the body of grouping evolution strategy (GES) algorithm to attain an effective meta-heuristic approach. The effectiveness of heuristics is tested on generated instances which demonstrates they are optimal for small-size problems. They are also tested on the data of daily auto-parts shipments gathered from the largest Iranian automobile company. Results demonstrate there exists a significant potential for cost saving through milk-run strategy compared with the direct shipping strategy.     

600 MW电站锅炉中印尼褐煤掺烧试验及数值模拟

为减少锅炉掺烧印尼褐煤发生的燃烧及制粉系统问题,提高锅炉掺烧印尼褐煤安全运行水平,在某600MW四角切向燃烧的电站锅炉中,通过现场试验与数值模拟的两种方法,选取锅炉运行的各种典型工况,研究了印尼褐煤投运方式、掺烧比例对燃烧的影响,同时分析了磨煤机研磨褐煤时对其性能参数的影响。研究表明:相比下部燃烧器投运印尼褐煤,采用中部或上部燃烧器投运褐煤方式时,炉顶烟气温度更接近锅炉设计运行工况;相比印尼褐煤30%、70%掺烧比例,50%掺烧比例更有利于燃烧器区域燃料燃烧的稳定性;磨煤机研磨褐煤时,在风煤比例为2.3~3.0时,可控制一次风温度大于55℃,磨煤机运行安全稳定。     

复合香辛料提取物对哈尔滨风干肠中生物胺形成的抑制作用

研究复合香辛料提取物(肉桂、丁香和八角按质量比1∶1∶1混合)不同添加量(0.1、0.3、0.5 g/kg)对哈尔滨风干肠发酵过程中生物胺形成的抑制作用,以及对风干肠理化指标、微生物指标和感官品质的影响。结果表明,复合香辛料提取物可以有效抑制生物胺(酪胺、腐胺、尸胺、组胺、2-苯乙胺和色胺)的积累(P0.05),减少脂肪氧化产物硫代巴比妥酸值并抑制好氧菌的生长,且抑制效果随添加量的增加而增大(P0.05)。但是添加0.5 g/kg复合香辛料提取物会产生过重的香辛料气味,影响产品感官可接受性。风干肠中复合香辛料提取物添加量为0.3 g/kg时,可有效抑制产品中生物胺积累,且可改善产品的感官品质。     

钢铁企业日际煤气最优混合配比的算法研究

钢铁企业根据日际生产计划,可以确定日际生产的副产煤气总体积、各煤气消耗设备的热量需求。为进一步确定各设备消耗的混合煤气中的煤气配比,使煤气产耗平衡,提出混合煤气逆向分解方法,将各设备消耗的混合煤气中所包含的单一煤气成分体积,表示为各设备获得热量与混合煤气热值的函数,在此基础上建立日际煤气最优混合配比算法模型。该模型以各设备的混合煤气热值及热量作为决策变量,以各煤气消耗设备的热量偏差最小为目标,综合考虑各煤气设备的热值要求、自备电厂的热值、热量要求及煤气体积守恒等约束条件。采用遗传算法求解,并利用遗传算法基因初始化的范围区间控制混合煤气的热值范围。算例结果表明:建立的日际煤气最优混合配比算法模型,在优化煤气分配的同时,显著减少了约束方程及决策变量的数量,为钢铁企业日际煤气平衡调度提供了理论支撑。