工艺参数对动态流量控制法挤压弯管应力的影响

采用有限元模拟和实验研究了挤压钛合金弯曲管件。通过实验验证了工件的形状和尺寸精度,并通过有限元模拟分析了工艺参数对挤出过程中变形体的平均压应力分布情况和挤出弯管件的曲率半径的影响规律。结果表明:有限元模拟中,弯管件的曲率半径误差为6.03%,弯管直径误差为3.82%;在靠近定径带处,平均压应力呈非均匀分布;在焊合腔内,靠近细分流孔区域的平均压应力小于靠近粗分流孔区域的平均压应力,平均压应力的大小顺序在通过粗、细分流孔前后相反;在模具结构固定不变时,弯管件的曲率半径随挤压速度的减小而增大,不随挤压温度的变化而变化。     

空间曲线的特征识别与高质量非均匀采样

为避免传统均匀采样方法因忽视曲线重要特征而生成不理想的采样结果,获得给定数量且由特征点和辅助点组成的采样点序列,提出基于特征识别的高质量空间曲线非均匀采样方法.首先使用抛物线插值法得到曲线上所有曲率极大值点和挠率极大值点的近似位置,经筛选后产生特征点,以更好地抓住空间曲线的轮廓特征.然后定义基于弧长、曲率和挠率加权组合的特征函数,并以此自适应地选取曲线上的辅助点.与3种主流采样方法比较的实验结果表明,该方法能够获得更高质量的采样结果且具有更好的实用性,从而进一步改善空间曲线的B样条拟合效果.     

Inversion,chemical complexity,and interstitial transport in spinels

Spinels with the generic chemical formula AB₂O₄ have potential applications in nuclear energy and batteries. In both cases, their functionality is related to mass transport through the crystal. Here, using long-time atomistic simulations, we examine the impact of the cation structure on interstitial transport in two spinel chemistries, inverse MgGa₂O₄ and double MgAlGaO₄. We emphasize two aspects of the transport properties: the unit mechanisms that are described by individual barriers, for which we introduce pole-figure-like plots, and the aggregate behavior of those unit mechanisms. Compared to previous work on normal spinels, we find that inversion significantly reduces the rate of interstitial transport in these structures and has an impact on the stability of defects as they move through the lattice. In particular, B cation interstitials are found to be kinetically stable only in the inverse MgGa₂O₄. These results provide new insight into relationship between structure, chemistry, and transport in spinels.     

Ferroelectric and electromechanical performance of diverse engineered states of Mn-doped 0.75Pb(Mg1/3Nb2/3)O3-0.25PbTiO3 ceramics

The materials processing history has a great influence on their properties and finally determines their application effect. In this paper, the ferroelectric, polarization-switching current, and strain properties of Mn-doped 0.75Pb(Mg_1/3Nb_2/3)O₃-0.25PbTiO₃ ceramics were studied in fresh state, aged state, and poled state, respectively. Compared with the symmetric polarization-electric-field (P-E) hysteresis loops, current-density-electric-field (J-E) curves, and bipolar electric-field-induced strain (S-E) curves in fresh state samples, asymmetric P-E loops, J-E curves, and bipolar S-E curves were obtained in poled state samples. Well-aged-state samples exhibit double hysteresis P-E loop, four peaks J-E curves, and symmetric S-E curves without negative strain. The symmetry-conforming short-range order (SC-SRO) principle of point defects and internal electric field E_i is employed to clarify the different phenomenon of three states. Results indicated that randomly oriented defect polarization P_D in aged samples can reverse the spontaneous polarization P_S back and result in the double hysteresis P-E loop and four peaks J-E curves. The oriented P_D and resulting E_i in poled-state samples will lead to the asymmetric loops and strain memory effect.     

基于秩序与非秩序理论的文创产品卡通形象设计研究

目的 从秩序与非秩序理论出发,研究文创产品卡通形象的设计方法.方法 对秩序与非秩序理论的视觉机制和创制理论进行梳理,结合实例,阐述了其与文创产品卡通形象设计之间的联系,分析文创产品卡通形象中的秩序与非秩序的表现形式,提出基于秩序与非秩序理论文创产品卡通形象设计的主要原则,归纳出一套基于秩序与非秩序理论的文创产品卡通形象设计流程与方法,指导设计实践,并验证这些理论方法在设计实践中有效性与可行性.结论 通过对秩序与非秩序理论的研究,文创产品卡通形象设计时应注意提高辨识度、亲和力和便于衍生设计的原则.探索基于秩序与非秩序理论的设计流程与方法,按照界定主题、主体形象设计、主体形象拓展、衍生品应用四个环节开展整体方案设计,为文创产品卡通形象设计提供新的思路与方法.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

Numerical analysis of history-dependent hemivariational inequalities and applications to viscoelastic contact problems with normal penetration

In this paper numerical approximation of history-dependent hemivariational inequalities with constraint is considered, and corresponding Céa’s type inequality is derived for error estimate. For a viscoelastic contact problem with normal penetration, an optimal order error estimate is obtained for the linear element method. A numerical experiment for the contact problem is reported which provides numerical evidence of the convergence order predicted by the theoretical analysis.     

Generalised multivariable supertwisting algorithm

The purpose of this paper is to present an extension of the generalised supertwisting algorithm (STA) to the multivariable framework. We begin by introducing an algorithm that may be deemed as a linear, quasicontinuous, or discontinuous multivariable system, depending on the functions that define them. For the class represented by such an algorithm we prove the robust, Lyapunov stability of the origin and characterise the perturbations that preserve its stability. In particular, when its vector field is discontinuous or quasicontinuous our algorithm is endowed with finite‐time stability. Due to its resemblance to the scalar case, we denote such finite‐time stable systems as generalised multivariable STA. Furthermore, the class of finite‐time stable systems comprise the currently available versions of STAs. To finalise, by means of simulation examples, we show that our proposed finite‐time stable algorithms are well suited for signals online differentiation and highlight their dynamical traits.