The radiation crosslinking and scission of ethylene-propylene copolymers studied by solid-state nuclear magnetic resonance

Methyl groups from chain scission and H-crosslinks have been identified by solid-state nuclear magnetic resonance in amorphous ethylene-propylene copolymers containing 23 and 36 mole % propylene after γ-irradiation to 10 MGy at 30°C. G (scission) and G (crosslink) values determined from the n.m.r. spectra and by extraction are in agreement, which suggests that the crosslinks are not clustered. This may differ from the situation in polyethylene where there is a substantial crystalline content. G(S). G(X) and the ratio G(S)/G(X) increase with increasing propylene content of the copolymers.     

The determinants of heat-shock element-directed lacZ expression in Saccharomyces cerevisiae.

Heat-shock induction of heat-shock protein genes is due to a specific promoter element (the heat-shock element, HSE). This study used lacZ under HSE control (HSE-lacZ) to characterize HSE activity in Saccharomyces cerevisiae cells of different physiological states and differing genetic backgrounds. In batch fermentations HSE-lacZ induction by heat shock was maximal in exponential growth, and showed marked decline with the approach to stationary phase. Expression in the absence of heat shock was unaffected by growth phase, indicating that the growth-dependent expression of many yeast heat-shock genes uses promoter elements in addition to the HSE. Heat-induced expression was strongly influenced by the temperature at which cultures were grown. While basal, uninduced expression was constant during growth at different temperatures to 30 degrees C, induction by transfer to 39 degrees C was reduced by increases in growth temperature as low as 18-24 degrees C. Maximal HSE-lacZ induction (30- to 50-fold) was in cultures grown at low temperatures (18-24 degrees C), then heat shocked at 39 degrees C. Ethanol was a poor inducer. Mutations having little effect on HSE-lacZ expression included a respiratory petite; ubi4 (which inactivates the poly-ubiquitin gene); also ubc4 and ubc5 (which each inactivate one of the ubiquitin ligases involved in degradation of aberrant protein). pep4-3 increased both basal and induced beta-galactosidase about two-fold, probably because of slower turnover of this enzyme in pep4-3 strains.     

浅谈下一代网络（NGN）

计算机网络的发展日新月异。下一代计算机网络（NGN）的探讨、研究已经成为当前的潮流。下一代网络是目前电信、互联网运营商和设备厂商都在讨论的热点技术，国内外许多网络运营商都在探讨，并正在或考虑建设试验网进行更深入的研究。本文介绍了NGN的定义、主要特点、分层结构和关键技术。     

FTIR investigation of ethylene coordination and polymerization on reduced Cr/SiO2 catalyst

FTIR spectroscopy was applied to study the initial steps of ethylene polymerization on reduced chromia-silica (0.5 wt% Cr/SiO₂). To decrease the speed of the reaction small doses of gas were introduced to the catalyst in each run and C₂D₄ was used to confirm band assignments. At the initial steps of the reaction only ethylene molecules coordinated to probably Cr _A ²⁺ cations were observed. The concentration of such complexes was estimated to be about 50% of the total amount of Cr atoms in the sample. The FTIR spectrum of the polymer formed at the initial doses of C₂H₄ (when [C₂H₄] [Cr]) was found to be slightly different from that formed after excess ethylene was introduced onto the catalyst ([C₂H₄] > [Cr]).     

2-（4-氯苯氨基）甲基苯酚降解的动力学研究

采用高效液相色谱技术,开展了Fenton试剂对2-（4-氯苯氨基）甲基苯酚（CMP）的氧化降解动力学的研究。考察了初始双氧水摩尔浓度、亚铁离子摩尔浓度和温度等因素对CMP降解速率的影响,结果表明,当双氧水摩尔浓度、亚铁离子摩尔浓度增大和温度升高时,CMP的氧化速率明显加快。在30~45℃的温度范围内,其氧化降解符合假一级反应动力学模型,反应的表观活化能Ea为102.90kJ/mol。     

视觉检测系统中亮度不均匀背景的一种去除方法

刀具形状视觉检测系统中，照明不均匀对测量结果影响很大。针对这种情况，提出了基于二维二阶多项式拟合并去除不均匀背景的方法。遵循最小均方程差原理，给出了二维二阶拟合的矩阵表达式。在编制的程序中，拟合点以人机交互形式由鼠标点击选出，程序自动记录所选点的图象人材与亮度值信息，然后拟合出背景曲面，并以二值图象形式给出去除背景后的目标图象。对一幅光照模型未知的网络图象进行了背景去除，实验结果良好。     

THERMODYNAMICS AND PHASE EQUILIBRIUM OF Cu－Y－O，Cu－Y－S，Cu－Y－O－S LIQUID SOLUTIONS

ＴＨＥＲＭＯＤＹＮＡＭＩＣＳＡＮＤＰＨＡＳＥＥＱＵＩＬＩＢＲＩＵＭＯＦＣｕ－Ｙ－Ｏ，Ｃｕ－Ｙ－Ｓ，Ｃｕ－Ｙ－Ｏ－ＳＬＩＱＵＩＤＳＯＬＵＴＩＯＮＳ￥Ｄｕ，Ｔｉｎｇ；Ｌｉ，Ｇｕｏｄｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈｉｎｓｔｉｔ...     

矿井主通风机自动监控系统的设计

为了保障主通风机安全、可靠、经济地运行,提出了一种基于S7-300 PLC的矿井主通风机自动监控系统的设计方案;给出了该系统的结构,详细介绍了该系统中PLC的硬件及软件结构、模拟量的检测实现及采用智能型PID调节器XMA5000对风机负压和流量进行自动调节的方法。实际应用表明,该系统能够实现通风机的就地、集中、远方3种控制方式,提高了主通风机的自动化程度和运行可靠性。     

基于西门子S7—300PLC和PRODAVE数据库的气力输送实验系统

本文介绍基于西门子S7—300PLC和PRODAVE数据链接库的气力输送实验系统。概述了气力输送实验系统工艺及功能要求,着重描述了该气力输送实验控制系统的硬件配置与软件设计。