高职模具类人才培养新模式的研究与实践

为了解决传统教学无法全面培养人才的问题,采用"课程融合+时空耦合+过程结合"的方式开展人才培养研究。以注射模设计与制造生产过程为导向,构建大项目牵引下的跨越课程、跨越学期的课程融合新模式,利用信息通信技术及互联网平台,将互联网与传统教学进行深度融合,创造新的教学生态,构建多元多维互动的时空耦合教学新关系,以全方位评价为引导,构建课程多元多维的评价新机制。以3个班级为对象开展不同模式下的教学,对试验班级成绩进行分析,研究结果表明:课程融合+时空耦合+过程结合新模式培养的学生更好地完成了综合项目,获得了较好的教学效果。     

Improvement of mechanical property and corrosion resistance of Mg-Zn-Nd alloy by bi-direction drawing

Mg-Zn-Nd alloy is a promising biodegradable metal material for surgical staples during the reconstruc-tion of digestive tract due to its good biocompatibility and suitable mechanical properties.However,its deformation property and corrosion resistance should be improved to make better safety and effective-ness of staples.In the present study,bi-direction drawing was adopted to maintain the initial texture characteristics,and improve mechanical property and corrosion resistance of Mg-2Zn-0.5Nd alloy.The results showed that the microstructure after bi-direction did not change too much,but the texture could maintain its initial characteristics.The ductility of the alloy with 60 ％ accumulative area reduction after bi-direction drawing was increased by 70 ％,indicating that an outstanding deformation property of Mg-Zn-Nd alloy can be obtained by bi-direction drawing.The corrosion resistance was also improved after bi-direction drawing compared with that under single direction drawing.     

镍基高温合金锥筒形件拉深旋压成形机理研究

针对镍基高温合金因加工硬化严重成形时极易产生破裂和起皱等典型缺陷的问题,以锥筒形壳体类零件为对象,提出了一种由锥形预制坯经过真空固溶处理后拉深旋压成形锥筒形件的方法,并对其成形机理进行了研究。基于Abaqus/Explicit平台,建立了锥筒形件拉深旋压有限元模型,分析了成形过程中的瞬态等效应力、等效塑性应变、切向应力、壁厚及三向应变分布规律。结果表明:在旋压成形过程中,最大瞬态等效应力位于旋轮接触区及附近区域、最大瞬态等效塑性应变位于坯料口部;瞬态切向压应力最大值位于旋轮接触区,而瞬态切向拉应力最大值位于旋轮接触区附近的两侧区域。筒形段中部壁厚减薄,而坯料口部壁厚增厚。旋压成形试验表明,锥形预制坯经拉深旋压后可获得壁厚均匀的锥筒形件。     

Textile applications of commercial photochromic dyes: part8. A statistical investigation of the influence of photochromic dyes on thermoplastic fibres using a UV-irradiation technique

Abstract

This research investigates the influence of the commercial photochromic dye concentration, expressed as a percentage, and polymer type and their interaction on the photocoloration properties of the as-spun and drawn fibres regarding the melt-spinning process. As-spun fibres made of polypropylene, polyethylene and polyester were spun with different percentages of the photochromic dye, drawn, tested and analysed under a factorial experimental design using appropriate experimental and statistical methods. According to the analyses and by using an independent source of ultraviolet irradiation and traditional colour measurement instrumentation of the degree of photocoloration and background colour, the most effective and significant parameter influencing the as-spun fibre’s photocoloration properties are the polymer type; the dye percentage effect was noted in the degree of photocoloration. The effects of the multi-stage hot-drawing process on the photocoloration properties of the drawn polypropylene and polyethylene fibres were characterised and statistically modelled. The dyed fibres showed reversible photochromism, developing pronounced colours from weak background colours on irradiation with ultraviolet light and returning to their original state when the ultraviolet light source was removed. The dye percentage positively affects the photocoloration of the as-spun and drawn polypropylene and polyethylene fibres. A new forecasting data source was achieved to optimise the selection of the polymer and the dye percentage and to specify the direction of increasing or decreasing of the significant process parameters. Utilising the elastic properties of manufactured fibres, they could be used in the development of chromic textiles for creative design, functional or smart purposes.     

某超大规模地采矿山运输阶段优化研究

根据某矿山超大规模、倾斜矿体、采用充填法上行开采的特点,通过方案对比,以技术可靠、安全运行为前提,以降低工程量和投资为目的,确定了运输阶段高度。针对运输阶段高度提升后存在的技术难点,进行了阶段运输系统优化研究,创新溜井居中、巷道居侧设计,国内首次应用斜溜井与直溜井的组合加巷道顶部放矿方式,同时实施运输水平铁轨与转段全寿命管理,最终实现了180m运输阶段在超大规模倾斜矿体开采中的应用,延长了运输阶段服务年限,减少运输水平两个、倒段工程两次,节省了开拓工程量,经济效益显著,并为国内同行矿山运输阶段的确定提供了借鉴。     

纺粘非织造聚合物拉伸模型初探

为探究纺粘非织造工艺中工艺参数对纤维最终直径的影响,文章基于纺粘非织造聚合物拉伸过程,构建了纺粘非织造聚合物拉伸理论模型,并应用MATLAB对模型进行数值计算。同时,选取纺粘工艺参数中的气流初始速度、聚合物初始温度、聚合物质量流量3个因素,通过控制变量法比较观察不同方案下经过数值求解后得到的纤维直径,得出3个因素分别对纤维最终直径的影响。结果表明,气流初始速度越大,聚合物初始温度越高,聚合物质量流量越小,最终形成的纤维直径越细。     

Polymers beyond standard optical fibres – fabrication of microstructured polymer optical fibres

This paper reports the overall fabrication process of microstructured polymer optical fibres (mPOFs). mPOF fabrication involves a two‐step process: on the one hand, the design and creation of a preform containing a large‐scale version of the desired fibre and, on the other, the precise heating and drawing of the preform to the final fibre. The preforms are produced either by an improved drilling technique or by capillary stacking. For a correct and accurate drawing of the fibre, a controlled and precise heating unit has to be designed, an issue that will be explained in detail in this work. The quality and optical performance of the final mPOF depends strongly on key factors such as the preform annealing, the accuracy of the technique selected for the creation of the preform structure, the heating stage, as well as on the drawing parameters. All of them are analysed in detail and some drawn mPOFs of interest are reported as well. © 2018 Society of Chemical Industry     

机械制图课改中三维模型库的开发和研究

针对机械制图课程教学中普遍存在的教学模型及挂图数量不足、教学难度大等问题,简述了使用SolidWorks软件建立三维实体模型的过程以及机械制图虚拟模型库的设计流程、内容组成、网络发布等。实践证明,该模型库的设计是成功的,不仅弥补了实物模型库的不足,而且具有更多优势。     

小方坯高拉速结晶器铜管温度的测量

阐明了小方坯结晶器铜管温度测量试验的方法与过程,通过在铜管内弧、外弧和侧面不同位置埋设的32支热电偶,对浇铸150 mm×150 mm过程中铜管温度进行在线检测,记录了不同工况下铜管温度随浇注时间的变化关系,分析了各种工艺参数对结晶器铜管温度分布的影响。结果表明,生产过程中结晶器铜管温度场是不稳定的,各点温度都在做非周期性、无规律的起伏变动;拉速越快,铜管四面的温度不均匀倾向越大;梅花型铜管各处温度要高于普通铜管,证明其换热效率更高,更适合高拉速的生产。     

采场结构参数与放矿方式的相似物理试验优化研究

基于单漏斗放矿试验,对放出椭球体形态发展趋势进行了分析,确定最终放出椭球体轴偏角、偏心率等核心指标。基于立体放矿模型,对比无贫化与低贫化两种放矿方式下回贫差指标,对放矿方式进行了优选。在物理试验结果基础上,采用相似物理试验法、经验类比法、理论分析法相结合的方法,对大间距椭球体排列形式下的采场结构参数进行优化,确定20m分段高度下的进路间距、崩矿步距、放矿步距、放矿方式等关键参数与工艺。采场结构参数优化的过程与结果,可以为同类工艺矿山参数设计提供技术参考。