心源性猝死一级预防植入心律转复除颤器前非持续室性心动过速与植入后恰当治疗的关系

目的探讨植入型心律转复除颤器(implantable cardioverter defibrillator,ICD)用于心源性猝死一级预防时,植入前发生非持续性室性心动过速(non-sustained ventricular tachycardia,NSVT)与植入后ICD恰当治疗的关系。方法本研究为单中心回顾性队列研究,连续纳入2006年1月至2017年12月在北京协和医院住院植入ICD用于一级预防的心脏病患者,患者在住院期间ICD植入前均完善Holter检查。根据Holter检查是否出现NSVT,将患者分为NSVT组及无NSVT组。门诊或电话随访至2018年8月,随访事件包括全因死亡、植入后ICD放电治疗及抗心动过速起搏(antitachycardia pacing,ATP)治疗情况。结果纳入60例符合入选和排除标准的患者,随访时间37 (14～61)个月,KaplanMeier生存曲线及Log-Rank检验提示,NSVT组与无NSVT组相比,全因死亡率无统计学差异(P=0. 108),NSVT组恰当治疗的风险高于无NSVT组(P=0. 033),NSVT和左心室射血分数与ICD恰当治疗独立相关(NSVT:HR=5. 099,95%CI:1. 399～18. 588,P=0. 014;左心室射血分数:HR=1. 077,95%CI:1. 013～1. 145,P=0. 018)。结论 ICD一级预防患者植入前出现NSVT提示接受ICD恰当治疗的风险增加。     

灵芝菌丝体多糖的分离纯化及其单糖组成分析与分子量测定

前期杂交优化后赤芝菌种经液体深层发酵后,提取灵芝菌丝体多糖,并过DEAE-Sepharose Fast Flow柱分离纯化,利用高效体积排阻色谱(HPSEC)检测多糖级分的纯度,采用完全酸水解PMP柱前衍生化RP—HPLC测定多糖级分的单糖组成,多角度光散射仪联用装置(SEC—MALLS)测定其绝对重均分子量(Mw),并且根据分子旋转半径与分子摩尔数的关系曲线斜率初步推断其空间构象。结果显示:分离纯化得到3个多糖级分GLMP1、GLMP2和GLMP3,HPSEC检测其峰面积百分比分别为93.58%,97.64%,99.19%,单糖组成分析结果表明GLMP1、GLMP2和GLMP3均含有甘露糖、鼠李糖、半乳糖醛酸、葡萄糖、半乳糖、木糖、阿拉伯糖和岩藻糖,但单糖摩尔比各异。SEC—MALLS测试GLMP1、GLMP2和GLMP3的Mw分别为4.526×105,4.603×104,3.760×103 g/mol,3个多糖级分构象可能均为高度紧缩且具有分支结构的聚合物。     

铝冷轧制油应用和生产工艺研究

通过对铝材冷轧工艺的分析。研究，以退火工艺中的斑痕为重点，提出采用加氢处理，异构化精制的石蜡基航空煤油组分为基础油，采用不同复合添加剂生产的通用铝冷轧制油完全可以满足客户要求。     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

Analysis of supersaturation and nucleation in a moving solution droplet with flowing supercritical carbon dioxide

A supercritical antisolvent (SAS) process is employed for production of solid nanoparticles from atomized droplets of dilute solution in a flowing supercritical carbon dioxide (SC CO₂) stream by attaining extremely high, very rapid, and uniform supersaturation. This is facilitated by a two‐way mass transfer of CO₂ and solvent, to and from the droplet respectively, rendering rapid reduction in equilibrium solubility of the solid solute in the ternary solution. The present work analyses the degree of supersaturation and nucleation kinetics in a single droplet of cholesterol solution in acetone during its flight in a flowing SC CO₂ stream. Both temperature and composition are assumed to be uniform within the droplet, and their variations with time are calculated by balancing the heat and mass transfer fluxes to and from the droplet. The equilibrium solubility of cholesterol with CO₂ dissolution has been predicted as being directly proportional to the Partial Molar Volume Fraction (PMVF) of acetone in the binary (CO₂–acetone) system. The degree of supersaturation has been simulated up to the time required to attain almost zero cholesterol solubility in the droplet for evaluating the rate of nucleation and the size of the stable critical nuclei formed. The effects of process parameters have been analysed in the pressure range of 7.1–35.0 MPa, temperature range of 313–333 K, SC CO₂ flow rate of 0.1136–1.136 mol s^?1, the ratio of the volumetric flow rates of CO₂‐to‐solution in the range of 100–1000, and the initial mole fraction of cholesterol in acetone solution in the range of 0.0025–0.010. The results confirm an extremely high and rapid increase in degree of supersaturation, very high nucleation rates and stable critical nucleus diameter of the order of a nanometre. Copyright © 2005 Society of Chemical Industry     

纤维体积分数对K3D/MCPA复合材料力学性能的影响

本文研究了纤维体积分数对三维编织芳纶纤维增强铸性尼龙(简称K3D／MCPA)复合材料力学性能的影响。研究表明，K3D／MCPA复合材料有优异的抗冲击性能，冲击强度比三维编织芳纶纤维增强铸性尼龙(简称C3D／MCPA)和纯基体均有大幅度的提高，且随着纤维体积的提高而升高。K3D／MCPA复合材料剪切强度随纤维体积比的增大而增大，其纵向剪切强度低于纯基体和C3D／MCPA复合材料，但其横向剪切强度高于它们。K3D／MCPA复合材料弯曲强度与弯曲模量随纤维体积比的提高而提高，但与相同体积比的C3D／MCPA相比，K3D／MCPA的弯曲强度与弯曲模量均较低。     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

电解法烟道气二氧化硫在线监测系统的设计

介绍了一种烟道气中SO2在线检测系统，该系统可以实现24h不间断地监测烟道气中SO2的体积分数和质量浓度，同时将信息经网络传送给环保有关部门，具有一定的新颖性、可靠性、准确性。     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

"The association between emotional upset and cardiac arrhythmia during daily life": Correction to Carels et al. (2003).

Reports an error in the original article by R. A. Carels et al (Journal of Consulting & Clinical Psychology, 2003[Jun], Vol 71[3], 613-618). On page 615, Lines 18, 20, 22, of Table 1, the data in the rows that read "Tachycardia in min per hr," "Repetitive PVCs per hr," and "PVCs per hr" are incorrectly reported in the n and % columns. They should have been reported in the M and SD columns. The corrected table is provided. (The following abstract of this article originally appeared in record 2003-00756-023.) Ventricular arrhythmia exhibits considerable within-subject variability that cannot be attributed to clinical status alone. This investigation examined the extent to which cardiac arrhythmia was associated with psychological and physical factors assessed during the hour preceding arrhythmic or nonarrhythmic activity. Approximately twice hourly, 46 patients randomly completed a diary assessing mood and physical symptoms during 24-hr electrocardiographic monitoring. Greater negative emotion was associated with increased arrhythmia. Additionally, greater negative emotion was significantly associated with increased arrhythmia among participants in a low left ventricular ejection fraction group (LVEF). However, this relationship between negative emotion and arrhythmia was not... (PsycINFO Database Record (c) 2010 APA, all rights reserved)