An iterative approach for the discrete‐time dynamic control of Markov jump linear systems with partial information

The , and mixed dynamic output feedback control of Markov jump linear systems in a partial observation context is studied through an iterative approach. By partial information, we mean that neither the state variable x(k) nor the Markov chain θ(k) are available to the controller. Instead, we assume that the controller relies only on an output y(k) and a measured variable coming from a detector that provides the only information of the Markov chain θ(k). To solve the problem, we resort to an iterative method that starts with a state‐feedback controller and solves at each iteration a linear matrix inequality optimization problem. It is shown that this iterative algorithm yields to a nonincreasing sequence of upper bound costs so that it converges to a minimum value. The effectiveness of the iterative procedure is illustrated by means of two examples in which the conservatism between the upper bounds and actual costs is significantly reduced.     

Asynchronous control for two‐dimensional hidden Markovian jump systems with partly known mode observation conditional probabilities

This study focuses on the asynchronous control problem for two‐dimensional discrete‐time hidden Markovian jump systems where the mode observation conditional probability matrix is partly known. Considering the original system modes are invisible, the observed modes emitted from an observer serve as an alternative for stability analysis and controller design where a mode observation conditional probability matrix is constructed to characterize the emission between system modes and observed modes. Specially, only partly known information of the mode observation conditional probability matrix is accessible. With the introduction of the free‐connection weighting matrices, the asymptotic mean square stability criterion is firstly derived based on Lyapunov method. This introduction provides a further degree of relaxation and less conservatism is therefore achieved. Secondly, we present synthesis conditions for asynchronous state feedback controller design given in terms of a set of interconnected linear matrix inequalities. Moreover, cluster concept based on the partitions of observed modes is adopted which helps to decrease the number of controllers and simplify the design complexity. A numerical example, regarding the cases with and without clustering of the observed modes, is presented to illustrate the effectiveness of the proposed method.     

Stability and stabilization for singularly perturbed systems with Markovian jumps

This article focuses on the stability and stabilization problems of singularly perturbed jump systems. Here, the singularly perturbed parameter (SPP) is also with Markov switching and satisfies any with positive bound predefined. First, stability conditions expressed ?_i‐free but involving its bound are developed by constructing an ?_i‐dependent Lyapunov function. Then, a method for state feedback stabilization controller depending on SPP is proposed, whose conditions are given in terms of linear matrix inequalities. Moreover, some special cases about deterministic SPP are considered too. Finally, two practical examples are used to demonstrate the effectiveness and superiorities of the proposed methods.     

Stochastic stabilization and destabilization of nonlinear and time‐varying hybrid systems by noise

The aim of this article is to design a suitable strength function g(t,x,r(t)) such that the Wiener noise g(t,x(t),r(t))dw(t) either stabilizes or destabilizes a given nonlinear and time‐varying hybrid system . To this end, the basic properties, including the existence and uniqueness of the local and global solutions and the nonzero property of solutions of the nonlinear and time‐varying hybrid stochastic systems, are first investigated as the theoretical basis of the article. Second, two theorems and the corresponding corollaries on the stability and instability of the hybrid stochastic systems are established. Third, the design method for the noise strength g(t,x,r(t)) is then proposed based on the established theorems. We also point out that the Markov jump r(t) may have a stabilizing (respectively, destabilizing) effect when we design the noise strength g(t,x,r(t)) so that the introduced noise g(t,x(t),r(t))dw(t) stabilizes (respectively, destabilizes) the corresponding hybrid system. Finally, we illustrate our method using two examples. Compared with the existing literature, our method is suitable for a wider class of nonlinear and time‐varying systems with weaker conditions than quasi‐linear systems.     

Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

基于深度学习的彩色以及近红外图像去马赛克

单传感器捕获的彩色-近红外（RGB-NIR）图像存在光谱干扰，从而导致重建出的标准彩色图像（RGB）图像与近红外（NIR）图像存在色彩失真以及细节信息模糊。针对这个问题提出一种基于深度学习的去马赛克方法，通过引入跳远连接与稠密连接解决了梯度消失和梯度弥散问题，使得网络更容易训练，并且提升了网络的拟合能力。首先，用浅层特征提取层提取了马赛克图像的像素相关性以及通道相关性等低级特征；然后，将得到的浅层特征图输入到连续多个的残差稠密块以提取专门针对去马赛克的高级语义特征；其次，为充分利用低级特征与高级特征，将多个残差稠密块提取到的特征进行组合；最后，通过全局跳远连接恢复最终的RGB-NIR图像。在深度学习框架Tensorflow上使用公共的图像与视觉表示组（IVRG）数据集、有植被的户外多光谱图像（OMSIV）数据集和森林（Forest）三个公开数据集进行实验。实验结果表明，所提方法优于基于多级自适应残差插值、基于卷积卷积和神经神经网络以及基于深度残差U型网络的主流的RGB-NIR图像去马赛克方法。     

Remaining useful life prediction of PEMFC based on cycle reservoir with jump model

Accurate prognosis of limited durability is one of the key factors for the commercialization of proton exchange membrane fuel cell (PEMFC) on a large scale. Thanks to ignoring the structure of the PEMFC and simplifying the prognostic process, the data-driven prognostic approaches was the commonly used for predicting remaining useful life (RUL) at present. In this paper, the proposed cycle reservoir with jump (CRJ) model improves the ESN model, changes the connection mode of neurons in the reservoir and speeds up the linear fitting process. The experiment will verify the performance of CRJ model to predict stacks voltage under static current and quasi-dynamic current conditions. In addition, the reliability of the CRJ model is verified with different amount of data as the training and test sets. The experimental results demonstrate that the CRJ model can achieve better effect in the remaining useful life prognosis of fuel cells.     

Three-dimensional immersed finite-element method for anisotropic magnetostatic/electrostatic interface problems with nonhomogeneous flux jump

Anisotropic diffusion is important to many different types of common materials and media. Based on structured Cartesian meshes, we develop a three-dimensional (3D) nonhomogeneous immersed finite-element (IFE) method for the interface problem of anisotropic diffusion, which is characterized by an anisotropic elliptic equation with discontinuous tensor coefficient and nonhomogeneous flux jump. We first construct the 3D linear IFE space for the anisotropic nonhomogeneous jump conditions. Then we present the IFE Galerkin method for the anisotropic elliptic equation. Since this method can efficiently solve interface problems on structured Cartesian meshes, it provides a promising tool to solve the physical models with complex geometries of different materials, hence can serve as an efficient field solver in a simulation on Cartesian meshes for related problems, such as the particle-in-cell simulation. Numerical examples are provided to demonstrate the features of the proposed method.     

Asynchronous adaptive output feedback sliding mode control for Takagi-Sugeno fuzzy Markovian jump systems with actuator faults

In this article, the problem of asynchronous adaptive dynamic output feedback sliding mode control (SMC) for a class of Takagi-Sugeno (T-S) fuzzy Markovian jump systems (MJSs) with actuator faults is investigated. The asynchronous dynamic output feedback control strategy is employed, as the nonsynchronization phenomenon of jump modes exists between the plant and the controller. A novel asynchronous adaptive SMC approach is proposed to solve the synthesis problem for T-S fuzzy MJSs with actuator faults. Sufficient conditions for stochastic asymptotic stability of T-S fuzzy MJSs are given. Under the designed asynchronous adaptive SMC scheme, the effects of actuator faults and external disturbance can be completely compensated and the reachability of sliding surface is ensured. Finally, an example is provided to demonstrate the effectiveness of the proposed design techniques.     

Filling the gap between Continuous and Discrete Time Dynamics of Autoregressive Processes

Discretization of continuous time autoregressive (AR) processes driven by a Brownian motion and embedding of discrete time AR sequences driven by a Gaussian white noise are classical issues. The article aims at establishing and using such discretization and embedding formulae between extended AR continuous time processes and discrete time sequences. The continuous-time processes are driven by either Brownian or jump processes, and may have random coefficients depending on time; Lévy-driven processes are also considered. The innovation of the discrete time processes may be of many types – including Gaussian. In one way, observing the continuous time AR process at discrete times leads the AR dynamics of the discretized process to be characterized. The other way round, AR sequences can be embedded, in the almost sure sense, into continuous time AR processes with the same dynamics. Illustration is provided through many examples and simulation.