Investigation of corrosion properties with Ni–P/TiNO coating on aluminum alloy bipolar plates in proton exchange membrane fuel cell

Aluminum alloy bipolar plates have unique application potential in proton exchange membrane fuel cell (PEMFC) due to the characteristics of lightweight and low cost. However, extreme susceptibility to corrosion in PEMFC operation condition limits the application. To promote the corrosion resistance of aluminum alloy bipolar plates, a Ni–P/TiNO coating was prepared by electroless plating and closed field unbalanced magnetron sputter ion plating (CFUMSIP) technology on the 6061 Al substrate. The research results show that Ni–P interlayer improves the deposition effect of TiNO outer layer and increase the content of TiN and TiO_xN_y phases. Compared to Ni–P and TiNO single-layer coatings, the Ni–P/TiNO coating samples exhibited the lowest current density value of (1.10 ± 0.02) × 10^?6 A·cm^?2 in simulated PEMFC cathode environment. Additionally, potential cyclic polarization measurements were carried out aiming to evaluate the durability of the aluminum alloy bipolar plate during the PEMFC start-up/shut-up process. The results illustrate that the Ni–P/TiNO coating samples exhibit excellent stability and corrosion resistance.     

Finite-time adaptive fuzzy control for a class of output constrained nonlinear systems with dead-zone

The article investigates the finite-time adaptive fuzzy control for a class of nonlinear systems with output constraint and input dead-zone. First, by skillfully combining the barrier Lyapunov function, backstepping design method, and finite-time control theory, a novel adaptive state-feedback tracking controller is constructed, and the output constraint of the nonlinear system is not violated. Second, the fuzzy logic system is used to approximate unknown function in the nonlinear system. Third, the finite-time command filter is introduced to avoid the problem of “complexity explosion” caused by repeated differentiations of the virtual control signal in conventional backstepping control schemes. Meanwhile, a new saturation function is added in the compensating signal for filter error to improve control accuracy. Finally, based on Lyapunov stability analysis, all the signals of the closed-loop are proved to be semi-globally uniformly ultimately bounded, and the tracking error converges to a small neighborhood region of the origin in a finite time. A simulation example is presented to demonstrate the effectiveness for the proposed control scheme.     

犹豫模糊环境下准则具有偏好关系的TODIM方法

针对智慧制造评估时专家的决策信息具有犹豫模糊不确定性问题，提出了一种关于准则具有犹豫模糊偏好关系的改进交互式多准则决策（TODIM）方法。首先提出了准则间的犹豫模糊偏好关系概念，并证明了其基本性质。在TODIM方法优势度的计算过程中，将准则权重犹豫模糊偏好关系替代原有的精确值权重，使信息的准确性最大化。将该方法用于智能制造的评估上，实例分析结果表明所提方法是可行和有效的。     

Some q-rung orthopair uncertain linguistic aggregation operators and their application to multiple attribute group decision making

q-Rung orthopair fuzzy sets (q-ROFSs), originally presented by Yager, are a powerful fuzzy information representation model, which generalize the classical intuitionistic fuzzy sets and Pythagorean fuzzy sets and provide more freedom and choice for decision makers (DMs) by allowing the sum of the $q\mathrm{t}\mathrm{h}$ power of the membership and the $q\mathrm{t}\mathrm{h}$ power of the nonmembership to be less than or equal to 1. In this paper, a new class of fuzzy sets called q-rung orthopair uncertain linguistic sets (q-ROULSs) based on the q-ROFSs and uncertain linguistic variables (ULVs) is proposed, and this can describe the qualitative assessment of DMs and provide them more freedom in reflecting their belief about allowable membership grades. On the basis of the proposed operational rules and comparison method of q-ROULSs, several q-rung orthopair uncertain linguistic aggregation operators are developed, including the q-rung orthopair uncertain linguistic weighted arithmetic average operator, the q-rung orthopair uncertain linguistic ordered weighted average operator, the q-rung orthopair uncertain linguistic hybrid weighted average operator, the q-rung orthopair uncertain linguistic weighted geometric average operator, the q-rung orthopair uncertain linguistic ordered weighted geometric operator, and the q-rung orthopair uncertain linguistic hybrid weighted geometric operator. Then, some desirable properties and special cases of these new operators are also investigated and studied, in particular, some existing intuitionistic fuzzy aggregation operators and Pythagorean fuzzy aggregation operators are proved to be special cases of these new operators. Furthermore, based on these proposed operators, we develop an approach to solve the multiple attribute group decision making problems, in which the evaluation information is expressed as q-rung orthopair ULVs. Finally, we provide several examples to illustrate the specific decision-making steps and explain the validity and feasibility of two methods by comparing with other methods.     

The generalized Dice similarity measures for Pythagorean fuzzy multiple attribute group decision making

The Pythagorean fuzzy set (PFS) is characterized by two functions expressing the degree of membership and the degree of nonmembership, which square sum of them is equal or less than 1. It was proposed as a generalization of a fuzzy set to deal with indeterminate and inconsistent information. In this study, we shall present some novel Dice similarity measures of PFSs and the generalized Dice similarity measures of PFSs and indicates that the Dice similarity measures and asymmetric measures (projection measures) are the special cases of the generalized Dice similarity measures in some parameter values. Then, we propose the generalized Dice similarity measures-based multiple attribute group decision-making models with Pythagorean fuzzy information. Then, we apply the generalized Dice similarity measures between PFSs to multiple attribute group decision making. Finally, an illustrative example is given to demonstrate the efficiency of the similarity measures for selecting the desirable ERP system.     

Distance and similarity measures of Pythagorean fuzzy sets based on the Hausdorff metric with application to fuzzy TOPSIS

Pythagorean fuzzy sets (PFSs) were proposed by Yager in 2013 to treat imprecise and vague information in daily life more rigorously and efficiently with higher precision than intuitionistic fuzzy sets. In this paper, we construct new distance and similarity measures of PFSs based on the Hausdorff metric. We first develop a method to calculate a distance between PFSs based on the Hasudorff metric, along with proving several properties and theorems. We then consider a generalization of other distance measures, such as the Hamming distance, the Euclidean distance, and their normalized versions. On the basis of the proposed distances for PFSs, we give new similarity measures to compute the similarity degree of PFSs. Some examples related to pattern recognition and linguistic variables are used to validate the proposed distance and similarity measures. Finally, we apply the proposed methods to multicriteria decision-making by constructing a Pythagorean fuzzy Technique for Order Preference by Similarity to an Ideal Solution and then present a practical example to address an important issue related to social sector. Numerical results indicate that the proposed methods are reasonable and applicable and also that they are well suited in pattern recognition, linguistic variables, and multicriteria decision-making with PFSs.     

Multicriteria decision-making using Archimedean aggregation operators in Pythagorean hesitant fuzzy environment

In multicriteria decision-making (MCDM), the existing aggregation operators are mostly based on algebraic t-conorm and t-norm. But, Archimedean t-conorms and t-norms are the generalized forms of t-conorms and t-norms which include algebraic, Einstein, Hamacher, Frank, and other types of t-conorms and t-norms. From that view point, in this paper the concepts of Archimedean t-conorm and t-norm are introduced to aggregate Pythagorean hesitant fuzzy information. Some new operational laws for Pythagorean hesitant fuzzy numbers based on Archimedean t-conorm and t-norm have been proposed. Using those operational laws, Archimedean t-conorm and t-norm-based Pythagorean hesitant fuzzy weighted averaging operator and weighted geometric operator are developed. Some of their desirable properties have also been investigated. Afterwards, these operators are applied to solve MCDM problems in Pythagorean hesitant fuzzy environment. The developed Archimedean aggregation operators are also applicable in Pythagorean fuzzy contexts also. To demonstrate the validity, practicality, and effectiveness of the proposed method, a practical problem is considered, solved, and compared with other existing method.     

改进的区间犹豫算子应用于物流企业选择决策

针对现有区间犹豫模糊Hamacher算子存在的缺陷，构建了一种基于改进的区间犹豫模糊Hamacher加权算子的群决策方法。在分析现有区间犹豫模糊Hamacher算子不能满足幂等性的基础上，定义新的区间犹豫模糊Hamacher四则运算；提出两种改进的区间犹豫模糊Hamacher加权算子，包括改进的区间犹豫模糊Hamacher有序加权平均（I-IVHFHOWA）算子和改进的区间犹豫模糊Hamacher有序加权几何（I-IVHFHOWG）算子，并详细探究它们的常用算子形式以及算子之间的内在联系；建立基于I-IVHFHOWA算子和I-IVHFHOWG算子的物流企业选择决策模型，并通过实例说明模型的有效性。     

Fuzzy logic approach in resource classification

Conventional geostatistical prediction methods can be used to carry out resource classification in ore beds and for reliability measurements. A field investigation based on lignite thickness data was conducted for resource classification in Eskisehir-Mihaliccik-Koyunagili coal basin. Moreover, a fuzzy logic-based resource classification method has been recently proposed to eliminate the uncertainties encountered in the conduct of conventional resource classification procedure. Fuzzy logic-based classification provides gradual transitions between two adjacent resource classes. In addition, the proposed method can classify each block by assigning a membership degree for handling decision-making problems encountered in conventional resource classification methods.