浅埋煤层群采场周期来压顶板结构及支架载荷

现场勘查发现,神府矿区浅埋煤层群间隔岩层厚度大多在15～45 m时,间隔岩层易存在单一关键层结构。文章通过现场实测得出了浅埋煤层群开采周期来压的基本特征:来压步距减小、强度增大、煤壁片帮严重,动载现象、台阶下沉现象和大、小周期来压现象明显。物理相似模拟实验揭示了间隔岩层关键层与上煤层已扰动关键层同步与非同步破断的大、小周期来压机理,发现了间隔岩层关键层与已扰动关键层共同形成的"梁-拱-壳"结构形态,给出了上煤层已扰动关键层结构形态的判别方法,得出了浅埋煤层群开采顶板周期破断可形成"台阶-台阶"、"砌体-台阶"、"砌体-砌体"的基本结构。综合建立了浅埋煤层群开采间隔岩层周期破断结构与力学模型,给出了支架受动静载荷作用的工作阻力计算方法,并得到了现场验证。     

Reference governors and maximal output admissible sets for linear periodic systems

ABSTRACT

In this paper, we consider the problem of constraint management in Linear Periodic (LP) systems using Reference Governors (RG). First, we introduce the periodic-invariant maximal output admissible sets for LP systems. We extend the earlier results in the literature to Lyapunov stable LP systems with output constraints, which arise in RG applications. We show that, while the invariant sets for these systems may not be finitely determined, a finitely-determined inner approximation, which is periodically invariant, can be obtained by constraint tightening. We then analyze the geometric and algebraic relationship between these sets and show that these sets are related via simple transformations, implying that it suffices to compute only one of them for real-time applications. This greatly reduces the memory burden of RG (or other similar constraint management strategies), at the expense of an increase in processing requirements. We present a thorough analysis of this trade-off. In the second part of this paper, we present two RG formulations, and discuss their properties and algorithms for their computation. Numerical simulations demonstrate the efficacy of the approach.     

Mg-bearing quartz solid solutions as structural intermediates between low and high quartz

Glass powder samples of cordierite composition (doped with 8 mol% TiO₂) were heat-treated to produce a series of increasingly SiO₂-enriched Mg-bearing quartz solid solutions (Qss). The obtained materials were then analyzed by X-ray diffraction: Rietveld structural refinements revealed that Mg-bearing Qss phases possess trigonal symmetry and a compositionally dependent intermediate structural arrangement between those of low and high quartz. High-temperature diffraction measurements were performed up to 700°C to characterize the thermal expansion behavior of the crystals. At SiO₂-rich compositions, a reversible high-to-intermediate inversion of the quartz structure is observed, which shifts with increasing stuffing to lower temperatures than the conventional 573°C for pure quartz. Similarities and differences to the better-established Li-bearing Qss are discussed in the text.     

煤化工酸水汽提装置运行存在问题及解决方法

本文简述了酸水汽提工艺的发展概况和技术进展,详细介绍了煤化工酸水汽提装置实际运行中存在的几类主要问题,并提出切实可行的解决措施,具有一定的借鉴意义。     

The periodic system and the idea of a chemical element: From Mendeleev to superheavy elements

Like other scientific concepts, the idea of a chemical element has changed considerably over time, since it was first established in the Enlightenment era. In Dmitri Mendeleev's construction of the periodic system, he distinguished between simple substances and elements as defined by their atomic weights. The foundation of the periodic system on the latter concept led to several challenges. For example, the system seemed unable to accommodate the radioactive substances eventually recognised as isotopes. Around 1920, elements were consequently redefined in terms of their atomic numbers, a nuclear property that could be determined by X‐ray spectroscopy. Although this understanding of an element has stood the test of time, new questions turned up relating to the concept of an element following the syntheses of transuranic elements since the early 1940s. These syntheses of very heavy elements have additionally led chemists and physicists to reconsider the criteria for the discovery of a new element. Recently, elements have been officially recognised on the sole ground that a small number of very heavy atomic nuclei were identified. The paper discusses how the notion of an element was modified during different periods of time, the reasons for the modifications, and the values ascribed to them in the communities of chemists and physicists.     

基于分解的多目标花朵授粉算法

在过去几十年里，许多多目标进化算法被广泛应用于解决多目标优化问题，其中一种比较流行的多目标进化算法是基于分解的多目标进化算法(MOEA/D)。花朵授粉算法是一种启发式优化算法，但迄今为止，花朵授粉算法在基于分解的多目标进化算法领域的研究还非常少。本文在基于分解的多目标进化算法的框架下，将花朵授粉算法拓展至多目标优化领域，提出一种基于分解的多目标花朵授粉算法(MOFPA/D)。此外，为了保证非支配解的多样性，本文提出一种基于网格的目标空间分割法，该方法从找到的Pareto最优解集中筛选出一定数量且分布均匀的Pareto最优解。实验结果表明，基于分解的多目标花朵授粉算法在收敛性与多样性方面均优于基于分解的多目标进化算法。     

急性炎性疾病患者乳酸林格氏液液体动力学

目的:探索炎性疾病患者的乳酸林格氏液（Ringer's lactate,RL）液体动力学特征以及炎性生物标记物是否可以作为协变量影响RL分布和排泄。方法:本研究为前瞻性队列研究。选择40例美国麻醉医师分级（ASA）I-II级，腹腔镜下择期胆囊切除术（胆囊炎组，n=20）或者腹腔镜下急诊阑尾切除术（阑尾炎组，n=20）。所有患者麻醉诱导前开始输注RL，按15 mL/kg，35 min内输毕。采用酶联免疫（enzyme-linked immunosorbent assay,ELISA）方法测定血浆炎症（TNF-α,IL-10和CRP）或者内皮损伤生物标记物（syndecan-1,SDC-1）；利用血红蛋白（Hb）稀释-时间曲线和尿量，使用Phoenix软件，采用非线性混合效应模型分析计算RL液体动力学参数和协变量的影响。结果:与胆囊炎组相比，阑尾炎组RL从组织间隙到血浆的转运速率常数（k21）显著降低（14×10-3min-1 versus 35×10-3min-1;P=0.012）。阑尾炎组C反应蛋白（CRP）升高［中位数38.1(1.8-143.6) μg/mL versus 1.3(0.1-159.0) μg/mL;P<0.001］；与清醒状态相比，麻醉期间（输液开始后30～45 min），液体从中央室中到外周室的转运速率常数（k12）显著增加（57×10-3min-1 versus 32×10-3min-1；P<0.01）。清除速率常数（k10）降低90%（0.6×10-3min-1 versus 5.3×10-3min-1;P<0.001）。无论在清醒状态还是麻醉状态下低血压均能降低液体清除；炎症或者内膜损伤的生物标记物不能作为显著影响RL液体动力学参数的协变量。结论:阑尾炎或者胆囊炎患者术前输入液体后“炎症反应的生物标记物”不是RL的液体动力学的协变量，但是两组患者中，全身麻醉期间输入液体的清除率下降。     

New exact solutions of the Tzitzéica-type equations in non-linear optics using the expa function method

One specific class of non-linear evolution equations, known as the Tzitzéica-type equations, has received great attention from a group of researchers involved in non-linear science. In this article, new exact solutions of the Tzitzéica-type equations arising in non-linear optics, including the Tzitzéica, Dodd–Bullough–Mikhailov and Tzitzéica–Dodd–Bullough equations, are obtained using the exp_a function method. The integration technique actually suggests a useful and reliable method to extract new exact solutions of a wide range of non-linear evolution equations.     

基于FLAC3D的综放面矿压显现规律研究

为了确保矿井的安全开采，揭示某矿矿压显现规律，采用FLAC^3D数值模拟软件对工作面走向、倾向力学和位移特征以及工作面初步来压步距、周期来压步距进行了模拟分析。研究得出:在沿走向方向，工作面顶板面形成拱形分布的应力释放区，随着工作面的推进，顶板的覆岩高度和应力拱结构逐渐向上发展；在沿倾向方向，工作面顶底板的位移分布呈现非对称的特征，顶板应力轮廓向工作面倾斜上方偏移；工作面的初次来压步距为40 m，周期来压平均步距为11.8 m，为工作面的支护选择和支护方式提供理论依据，为顶板围岩控制提供了重要参数。