Experimental investigation on the heat and water transfer enhancement in a membrane-based air-to-air humidifier at insulation condition

In the present study, a membrane-based air-to-air planar humidifier (MAPH) with baffle-blocked flow channels and a common MAPH are fabricated, tested and compared. These MAPHs are well thermal insulated from their surroundings. Polyoxymethylene (POM) plates with some unique properties such as large tensile and flexural strength, high chemical resistance and high stiffness are used to create channels at dry and humid sides of MAPHs. The obtained findings revealed that the higher heat and water transfer rates and smaller dew point approach temperature (DPAT) in entire tested flow rates occurs in baffle-blocked MAPH. To evaluate the MAPH performance with considering the pressure drop, a dimensionless parameter, performance evaluation criteria (PEC), is introduced. At flow rates less than 1 m³/h, PEC is less than 1, indicating a decline in MAPH performance with considering the pressure drop. In baffle-blocked MAPH using water trap in the inlet of dry side leads to the performance deterioration. Additionally, the increased relative humidity (RH) of humid side inlet causes an increase in DPAT, consequently, the performance deterioration.     

Sub‐5 nm Dendrimer Directed Self‐Assembly with Large‐Area Uniform Alignment by Graphoepitaxy

Directed self‐assembly (DSA) using soft materials is an important method for producing periodic nanostructures because it is a simple, cost‐effective process for fabricating high‐resolution patterns. Most of the previously reported DSA methods exploit the self‐assembly of block copolymers, which generates a wide range of nanostructures. In this study, cylinders obtained from supramolecular dendrimer films with a high resolution (<5 nm) exhibit planar ordering over a macroscopic area via guiding topographical templates with a high aspect ratio (>10) and high spatial resolution (≈20 nm) of guiding line patterns. Theoretical and experimental studies reveal that this property is related to geometrical anchoring on the meniscus region and physical surface anchoring on the sidewall. Furthermore, this DSA of dendrimer cylinders is demonstrated by the non‐regular geometry of the patterned template. The macroscopic planar alignment of the dendrimer nanostructure reveals an extremely small feature size (≈4.7 nm) on the wafer scale (>16 cm²). This study is expected to open avenues for the production of a large family of supramolecular dendrimers with different phases and feature dimensions oriented by the DSA approach.     

Effects of hydrogen enhancement on mesoscale burner array flame stability under acoustic perturbations

Partial substitution of hydrocarbon fuel with hydrogen can effectively improve small-scale combustion system stability and performance, potentially opening the way for novel compact power generation and/or propulsion systems in the future. In this study, the effects of hydrogen enhancement between 0% and 40% hydrogen volumetric fractions in methane fuel were experimentally observed in a mesoscale burner array subjected to external acoustic perturbations. The mesoscale burner array utilizes an array of swirl-stabilized burner elements and their interactions with neighboring elements to improve the overall flame stability and simultaneously reduces the combustor length scale. OH1 chemiluminescence and OH planar laser-induced fluorescence (OH-PLIF) were used to image various hydrogen-enriched flames at an equivalence ratio of 0.7, subjected to transverse acoustic perturbations at 320 Hz. Two acoustic modes were imposed by controlling the phase difference between two speakers perturbing the flow. OH1 chemiluminescence images exhibited flame length scale reduction, leading to a denser flame array. Also, flame arrays with higher hydrogen enrichment were found to be more robust against transverse acoustic perturbations, demonstrated by reduced fluctuations in the global heat release rate. OH-PLIF images showed that flames with higher hydrogen enrichment initiated V- to M-shaped flame shape transition even under fuel lean conditions, thereby improving the combustion stability. OH-PLIF images were also used for flame stability analysis through spectral proper orthogonal decomposition (SPOD). The SPOD analysis showed hydrogen enrichment diminished flame fluctuation structures under fuel lean operation.     

{X,Y}-Cyclacene Graphs with Next Nearest Neighbor Interactions

Eigensolutions of {X( = C,B,N),Y( = C,B,N)}-cyclacene graphs with next nearest neighbor (nnn) interactions have been obtained in analytical forms by adapting n-fold rotational symmetry followed by two-fold rotational symmetry (or a plane of symmetry). Expressions of eigensolution indicate the subspectral relationship among such cyclacenes with an even number of hexagonal rings e.g., eigenvalues of {X,Y}-di-cyclacene are found in the eigenspectra of all such even cyclacenes. Total π-electron energies and highest occupied molecular orbital and lowest unoccupied molecular orbital (HOMO–LUMO) gaps are calculated using the analytical expressions obtained and are found to vary negligibly with the variation of nnn interactions in such cyclacenes. Total π-electron energy is found to increase due to increase in restriction intensity of nnn interactions, whereas the HOMO–LUMO gap of polyacenecs having the even number of hexagonal rings and with one electron at each site (atom) decreases with increase in the restriction intensity since such systems contain degenerate half-filled HOMO (bonding or nonbonding) that are much more vulnerable for perturbations imposed through nnn interactions.     

平面并联机构工作空间的三维螺旋扫描CAD求解

针对平面并联机构无奇异位置工作空间求解困难、过程繁琐、计算量大等问题，提出了基于CAD求解平面并联机构工作空间的三维螺旋扫描方法。将[n]自由度平面并联机构分解成[n]条支链进行独立分析，得到每条支链下末端执行器的可达区域，再将所有支链可达区域取交集即为平面并联机构工作空间。应用SolidWorks软件建立平面并联机构模型，进行几何特征处理，通过自动求解器求解，将求解过程图形化，快速得到同轴布局5R机构和平面3-RPR并联机构的无奇异位置工作空间。通过同轴布局5R机构的运动学实验，验证了该求解方法的可行性。     

一种用于平面的电火花强化修复装置

研究了一种用于金属平面的电火花强化修复装置。经过SEM照片分析,MM200磨损试验,以及硬度梯度分布综合判断,该装置生成的强化修复层比较完整、有一定厚度,极大改善了零件表面的硬度和耐磨性。     

Study of equivalent efficiency calibration method for radioactive gas source measured on HPGe detectors

ABSTRACT

In view of the complexity of current detection efficiency calibration of radioactive gas sources, a method using solid planar sources to be equivalent to gas sources was studied. For the 50 mL gas source box, an optimal equivalent scheme was selected by Monte Carlo Simulations. Then, the full-energy-peak efficiency curve of gas sources at the measurement position of 25 cm, with source-to-detector distance of 25 cm, was fitted by measuring solid planar sources with known activity. To verify the accuracy of the efficiency curve, ⁴¹Ar, ¹³³Xe and ⁸⁷Kr gases were produced and determined by length-compensated method. Then, their full-energy-peak efficiencies at 25 cm position away from the detector were directly calibrated. The percentage efficiency deviations between interpolation from the efficiency curve and direct calibration are all less than 2.5%, which proves the accuracy of the equivalent method. This calibration method is a general one and can be also used for some other radioactive sample measurements, such as non-destructive analysis of gaseous fission product samples with a suitable source-to-detector distance.     

Analysis of arbitrarily shaped planar cracks in three-dimensional isotropic hygrothermoelastic media

In the present article, a planar crack of arbitrary shape embedded in three-dimensional isotropic hygrothermoelastic media is investigated. Based on the general solutions and Hankel transform technique, the fundamental solutions for unit-point and extended displacement discontinuities (EDD; including the displacement discontinuities, moisture concentration discontinuity, and the temperature discontinuity) are derived. The EDD boundary integral equations for an arbitrarily shaped, planar crack in the hygrothermoelastic medium are established in terms of the EDD. Utilizing the boundary integral equation method, the singularities of near-crack front fields are analyzed, and the stress, moisture flux, and heat flux intensity factors are all derived in terms of the EDD. As a special case, the analytical solution for a penny-shaped crack under uniform combined loadings is presented. The EDD boundary element method is proposed for numerical simulation. The numerical result for a penny-shaped crack subjected to uniform mechanical–moisture–thermal loading is compared with the analytical solution to verify the correctness of the proposed method. Two coplanar elliptical cracks subjected to combined loadings are simulated as an application, and the influences of applied loadings and the ellipticity ratio are discussed.     

面向平板结构钙钛矿太阳能电池的金属氧化物综述

作为平板结构钙钛矿太阳能电池的电荷传输层，金属氧化物薄膜对器件性能有重要影响. 系统性概述平板结构钙钛矿太阳能电池对金属氧化物薄膜形貌、电学、光学、化学及热等物理特性要求，并对目前在高效钙钛矿太阳电池制备中最有前景的金属氧化物电子传输层及空穴传输层材料特性及代表性工作进行总结. 针对大多数金属氧化物迁移率低、表面缺陷多及能级匹配差的问题，分析元素掺杂、表面改性、复合薄膜设计等手段解决的相关进展. 总结目前金属氧化物薄膜沉积技术现状及优缺点，探讨今后薄膜沉积技术发展、改进方向. 对低温沉积金属氧化物薄膜在柔性器件方面的应用进行展望.     

Pro/E三维造型向AutoCAD二维图形的转换技术

介绍了将Pro/E参数化实体造型同现行的AutoCAD绘图相结合进行产品设计的方法 ,该方法在Pro/E中建立三维模型 ,然后转换为二维平面视图 ,并将其以dwg格式输出 ,提供在AutoCAD中调用。应用该方法将提高产品设计的效率。