价值网络语境下企业设计价值创新路径研究

目的 在新的视角下，提出一种价值创新路径模型，对设计驱动型企业的价值实现方式进行有效补充。方法 通过文献研究，论述了企业关系由价值链到价值网转变的历史趋势;通过比较研究，对价值实现过程中主客体之间的4种关系进行了类比分析，提出了不同主客体关系状态下设计实践的具体表现方式。结果 在价值网络语境下，以价值论为理论依据，从主客体之间的关系入手，构建设计价值创新路径模型。结论 通过分析证明:“主客体统一状态”是企业价值创造的理想状态;主客体关系一直处于动态的变化过程中;客体对主体的“意义”也一直处于动态变化中。在这种动态变化的关系网络中，设计驱动方式已经成为企业创新的重要模式，企业如何捕获并诠释“意义”，成为价值实现的关键所在。     

快速近似计算Shapley值的归因解释方法

Shapley值归因解释方法虽然能更准确量化解释结果, 但过高的计算复杂度严重影响了该方法的实用性. 本文引入KD树重新整理待解释模型的预测数据, 通过在KD树上插入虚节点, 使之满足TreeSHAP算法的使用条件, 在此基础上提出了KDSHAP方法. 该方法解除了TreeSHAP算法仅能解释树结构模型的限制, 将该算法计算Shapley值的高效性放宽到对所有的黑盒模型的解释中, 同时保证了计算准确度. 通过实验对比分析, KDSHAP方法的可靠性, 以及在解释高维输入模型时的适用性.     

Sulfate- and pH-driven metabolic flexibility in sugarcane vinasse dark fermentation stimulates biohydrogen evolution,sulfidogenesis or homoacetogenesis

Dark fermentation of sugarcane vinasse can be used as a “cleaning” step to remove sulfate prior to methanogenesis because sulfidogenic conditions can be successfully established in parallel with biohydrogen production. Using a 2² central composite rotational design (CCRD) and response surface methodology (RSM), this study assessed the impacts of bicarbonate and sulfate availability on the establishment of sulfidogenesis in the thermophilic (55 °C) fermentation of vinasse in batch reactors, equally assessing the impacts on biohydrogen evolution. CCRD-RSM results indicated the favoring of biohydrogen production at the lowest sulfate and bicarbonate concentrations, whilst the opposite was observed for sulfidogenesis. Glycerol, lactate, and hydrogen were the preferential electron donors utilized by sulfate-reducing bacteria (SRB), whilst ethanol was markedly consumed only at high sulfate concentrations. SRB were inhibited by sodium when dosing excess NaHCO₃ and Na₂SO₄. Complementary tests revealed maximum biohydrogen production (2.40 mmol) out of the CCRD, at pH exceeding 7.5 with no interference of sulfidogenesis. Non-efficient biohydrogen production was observed at low pH (<5.0; ～1.90 mmol) because the uptake of lactate was inhibited. Meanwhile, homoacetogenesis was established under intermediate pH range (5.5–6.5), as revealed by the accumulation of acetate (up to 2.5 g L^?1). 16S rRNA gene amplicon sequencing further revealed the genera Thermoanaerobacterium/Pseudoclostridium, Desulfotomaculum/Desulfohalotomaculum and Sporomusaceae/Moorella as the main biohydrogen-producing, sulfate-removing and biohydrogen-consuming (homoacetogens) microbial groups, respectively. Hence, using a single inoculum source, vinasse may provide a butyrate-rich (along with biohydrogen-rich biogas) or a sulfate-free and acetate-rich fermented effluent, depending mainly on proper pH control.     

Strength and deformation properties of frozen sand under a true triaxial stress condition

In recent years, the mechanical properties of frozen soils under complex stress states have attracted significant attention; however, limited by the test apparatus, true triaxial tests on frozen soils have rarely been conducted. To study the strength and deformation properties of frozen sand under a true triaxial stress state, a novel frozen soil testing system, i.e., a true triaxial apparatus, was developed. The apparatus is mainly composed of a temperature control system, a servo host system, a hydraulic servo loading system, and a digital control system. Several true triaxial tests were conducted at a constant minor principal stress (σ₃) and constant intermediate principal stress ratio (b) to study the effect of intermediate principal stress (σ₂) on the mechanical properties of frozen sand. The test results showed that the stress–strain curve can be mainly divided into three stages, with evidence of strain hardening characteristics. The strength, elastic modulus, and friction angle increased with the increase in b from 0 to 0.6, but decreased when increasing b from 0.6 to 1, whereas the cohesion varied little with the variation in b. The deformation in the direction of σ₂ changed from dilative to compressive and that in the direction of σ₃ remained dilative throughout.     

珠江口盆地珠一坳陷古近系高自然伽马砂岩形成机制及油气地质意义

运用放射性元素寻找油气是一种非常规油气勘探手段。近年来,在珠江口盆地珠一坳陷富烃凹陷周边古近系钻遇高自然伽马(GR)砂岩,其GR值(100~300 API)甚至大于同区泥岩的GR值(100~200 API)。为了弄清该特殊现象背后的地质意义,对珠江口盆地珠一坳陷古近系高自然伽马砂岩开展了铀(U)、钍(Th)、钾(K)等3种元素含量与GR值的相关趋势线分析,从井震特征、岩性特征及矿物成分特征等入手分析了砂岩GR值增高的主要原因及成因机制,探讨了放射性元素聚集的条件、运移通道、驱动力以及油气意义。结果表明:西江、惠州地区由U含量增高导致砂岩GR值偏高,恩平、番禺地区由K,Th含量增高导致砂岩GR值偏高;砂岩GR值增高有两大成因机制,一是地下流体带来的放射性元素离子U4+在氧化-还原面处富集后导致地层GR值偏高,这种特殊现象说明在具有连通基底大断裂旁的圈闭中,U4+的富集指示了曾经油气的存在,证实了研究区油气运移通道的有效性,对于油气藏的预测有着非常重要的指导性意义,二是地表流体带来的含放射性元素的矿物大量沉积后导致地层GR值偏高,含放射性元素矿物性质不稳定,可指示近源供给的存在,对于判断物源及沉积环境有着非常重要的意义。该研究成果为预测研究区油气成藏有利区带提供了依据。     

Multidirectional focus measure for accurate three-dimensional shape recovery of microscopic objects

Shape from focus (SFF) is a technique to recover the shape of an object from multiple images taken at various focus settings. Most of conventional SFF techniques compute focus value of a pixel by applying one of focus measure operators on neighboring pixels on the same image frame. However, in the optics with limited depth of field, neighboring pixels of an image have different degree of focus for curved objects, thus the computed focus value does not reflect the accurate focus level of the pixel. Ideally, an accurate focus value of a pixel needs to be measured from the neighboring pixels lying on tangential plane of the pixel in image space. In this article, a tangential plane on each pixel location (i, j) in image sensor is searched by selecting one of five candidate planes based on the assumption that the maximum variance of focus values along the optical axis is achieved from the neighborhood lying on tangential plane of the pixel (i, j). Then, a focus measure operator is applied on neighboring pixels lying on the searched plane. The experimental results on both the synthetic and real microscopic objects show the proposed method produces more accurate three-dimensional shape in comparison to conventional SFF method that applies focus measures on original image planes.     

基于亚像素边缘检测的纱线条干均匀度测量

为了精确地评价纱线的表观条干均匀性,提出一种基于亚像素边缘检测的纱线条干均匀度检测方法。首先通过图像采集装置获取纱线图像;然后对纱线图像进行亚像素边缘检测获取纱线边缘点集;利用开运算对获取的边缘点集进行处理,进而获得纱线条干的边缘;最后采用坐标直方图方法计算纱线平均直径和条干CV值。为验证方法的有效性和准确性,对多种不同线密度的纯棉纱线进行测试,并将测试结果与电容式条干仪的均匀度检测及基于模糊C均值分类和Otsu图像法的检测结果进行了对比。结果表明:基于亚像素边缘检测的纱线条干均匀度检测方法与电容式的测量结果有着较好的一致性,证明所提方法可得到准确的结果。     

基于主成分分析法的熟化菠萝蜜种子品质评价

以菠萝蜜种子为原料,研究水煮、汽蒸、焙烤3种熟化方式对其感官品质、色泽、质构、糊化度、基本营养含量、脂肪酶抑制率、质量损失率和微观结构的影响,并对其品质指标进行主成分分析。结果表明:水煮、汽蒸、焙烤3种熟化方式对不同指标有较大影响,水煮方式糊化度最高且质量损失率最大;焙烤显著加深菠萝蜜种子色泽且脂肪酶抑制率最大;汽蒸熟化后菠萝蜜种子感官评分最高;通过主成分分析可知,焙烤方式获得的品质评价综合得分最高,可作为菠萝蜜种子预熟化的较优选择。     

织物结构参数对热传递性能影响的模拟分析

为方便快捷构建出接近三原组织织物真实结构的三维几何模型,应用图像处理技术对织物截面提取特征点,基于Newton插值公式拟合纱线中心线方程进而建立织物模型,而后在有限元软件中设置材料取向、定义边界条件,对三原组织织物的热传递性能进行数值模拟,通过实验验证了有限元方法及模型的有效性。之后预测了织物紧度对织物热传递性能的影响。结果表明:在相同织物紧度的条件下,平纹织物的热传递性能最好,其次是斜纹织物,最后是缎纹织物;在一定范围内,随着织物紧度的增加,织物的导热性能逐渐增加。