Voltage sag compensation with minimum energy injection by use of a micro‐SMES

This paper presents a method to compensate voltage sags with minimum energy injection for a series‐connected voltage restorer using a micro‐SMES. A circuit for extracting the fundamental symmetrical components from sag voltages and a minimum energy injection algorithm is described. Simulations of voltage sag compensation have been carried out using PSCAD/EMTDC for various faults. The simulation results confirm the validity of the proposed method and show the possibility of reducing the size of energy storage devices. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(3): 70–80, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10047     

Solving regularized least squares with qualitatively controlled adaptive cross‐approximated matrices

The adaptive cross‐approximation (ACA) technique is applied to accelerating an inverse‐problem solver that estimates charge distribution on a dielectric spacer. The ACA generates an approximated system‐matrix that enables us to carry out high‐speed inverse calculation. We designed an approximation procedure based on ACA with some additional concepts, that is, (a) partitioning of matrix based on algebraic information, (b) approximation quality control based on matrix norms, and so on. The tested solver (LSQR for regularized least squares) with ACA demonstrates about 10 times faster performance than that without ACA. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(3): 10–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20326     

3^n阶矩阵乘法的分块算法

针对３＾ｎ阶矩阵的乘法运行，给出了一种分块算法，其乘法运行量比常规的矩阵乘法计算方法和补零的基－２算法都有所减少。     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵     

Influence of the composition of the binder and the carbonation on the zeta potential values of hardened cementitious materials

Electroosmotic experiments have been carried out on eight different mixes of hardened cementitious matrixes including concrete, mortar and pastes, different types of binders, carbonated and non-carbonated specimens and different test conditions. From these trials, the zeta potential values have been determined and the optimum experimental parameters and devices have been established. In addition, the influence of the composition of the binder on the zeta potential has been quantified indicating that higher amounts of Al₂O₃ in the binder lead to higher positive values of zeta potential, while the SiO₂ acts just on the opposite side. This has been explained in terms of the different i.e.p. (isoelectric point) for both oxides. Concerning the influence of carbonation, it increases the absolute value of the zeta potential toward more negative values; this behaviour has been attributed to the influence of the specifically adsorbed Ca²⁺ in the negative sites of the surface in the non-carbonated samples.     

框架的行置换和列置换——处理复杂系统的新思维系列之四

本系列论文基于《多边矩阵理论》,由东方整体性思维所启迪,试图提供并完善一套从整体到局部处理复杂系统多指标问题、非均匀性问题、非线性问题的强有力的数学工具,并对其进行严格的理论推导和证明。本文利用群论的相关概念和结论,将其和框架的剖分运算相结合,引入了导出框架和对称框架的定义,证明了框架的行置换等价于列置换的结论,从而以后可以统一地处理指标间的置换问题。     

Influence of Reinforcement Content and Matrix Composition on the Oxidation Resistance of Aluminum-Matrix Composites (A3xx.x/SiCp)

A study was made on the influence of the SiCp proportion and the matrix concentration of four composites (A360/SiC/10p, A360/SiC/20p, A380/SiC/10p, A380/SiC/20p) on their oxidation behavior. Gravimetric tests were used in a kinetics study of the corrosion process at different temperatures (350, 400, 450, and 500°C). The influence of corrosion on mechanical properties was evaluated by hardness measurements. The nature of corrosion products and the influence of the microstructure on the morphology and growth of the oxidation layer were analyzed by SEM and low-angle XRD. The extent of the damage due to oxidation for Al/SiCp composites increases with the SiCp concentration due to the increase of nucleation sites. One of these nucleation sites is in the interface region between the matrix and the particles. Oxidation was influenced more by the percentage of alloy elements in the matrix than by the proportion of SiCp reinforcement. The presence of Cu and Ni in the matrix favors the oxidation process through the formation of different intermetallic compounds.     

线性时滞系统稳定性分析综述

时滞在工程领域广泛存在,对此综述了线性时滞系统的稳定性研究方法.从频域和时域两个角度详细介绍了各种方法的特点,着重讨论基于线性矩阵不等式(LMI)的分析方法,指出保守性是分析的重点.对现有结果的保守性进行比较和评述,并提出了改进的思路.     

Stability analysis of neutral systems with distributed delays

The stability of neutral systems with distributed delays is investigated in this paper. A modified Lyapunov-Krasovskii functional is constructed to study this class of systems. The proposed stability criterion is discrete-, distributed- and neutral-delay-dependent. In addition, by this method one can study the case when the coefficient matrix of the neutral delay term is time-varying uncertain. The reduced conservatism is illustrated in a numerical example.