Numerical study of microscopic particle arrangement of suspension flow in a narrow channel for the estimation of macroscopic rheological properties

In a narrow channel, the apparent relative viscosity of a suspension with finite-size particles is strongly dependent on its microscopic particle arrangement. Relative viscosity increases when suspended particles flow near the channel wall; thus, a suspension in a narrow channel does not always exhibit the same rheological properties even if the concentration is the same. In this study, we focus on the inertia and concentration of particles in a narrow channel and consider their effects on the microscopic particle arrangement and macroscopic suspension rheology. Two-dimensional pressure-driven suspension flow simulations were performed using a two-way coupling scheme, and normalized particle density distribution (PDD) were implemented to consider their particle arrangements. The results demonstrated that the velocity profiles for the particle suspension were changed by the Reynolds number and particle concentration because of the interactions between particles according to the power-law index. These changes affected the particle equilibrium positions in the channel, and the subsequent changes in solvent layer thickness caused changes in the macroscopic apparent viscosity. The behavior of microscopic particles played important roles in determining macroscopic rheology. Thus, we have confirmed that a normalized PDD can be used to estimate and assess the macroscopic rheology of a suspension.     

Techno-economic assessment of hydrogen refueling station: A case study in Croatia

Hydrogen refueling station (HRS) capacity and location depend on the users, which makes it difficult to select the most favorable option before potential users are actually identified. As in Croatia, at least for now, there are no hydrogen users, this study considers a wide range of HRS capacities and their different configurations. These include hydrogen production and charging station within one existing wind farm in Croatia or both nearby the users, the hydrogen production within the wind farm and the charging station nearby the users, while hydrogen is delivered to the station with a tube trailer, and configuration of hydrogen production within the wind farm with a mobile charging station in case of several users in different locations. Each HRS configuration is evaluated by the obtained levelized cost of hydrogen depending on the capital, and operation and maintenance costs within the HRS techno-economic analysis provided.     

Generation,validation and application of dynamic load profiles in flow measurement using cavitating Herschel–Venturi nozzles

Today, utility meters for water are tested for measurement behavior at stable operating conditions at specified flow rates as part of the approval process. The measurement error that occurs during start and stop or when changing between flow rates may not be taken into account. In addition, there are new technologies whose measuring behavior under real-world conditions is only known to a limited extend. To take these facts into account, a new method has been developed and tested to determine the measurement behavior of water meters under dynamic load profiles as they occur in the real application. For this purpose, a test rig for flow rate measurement was extended by a cavitation nozzle apparatus and the generation of dynamic load profiles was validated. For the cavitation nozzles used, possible factors influencing the flow rate, such as temperature and purity of the water as well as the upstream pressure were investigated. Using different types of domestic water meters, the applicability of the dynamic test procedure was demonstrated and the measurement behavior of the meters was characterised.     

管道中旋流喷嘴雾化流场的速度分布特性

离心式旋流雾化喷嘴内流场的速度分布决定了喷嘴的雾化性能。利用VOF两相流模型和RNG k-ε湍流模型对管道中减温水通过旋流喷嘴雾化并与过热蒸汽混合的整个流动过程进行了三维数值模拟,获得了喷嘴雾化场的流动过程,着重分析了内外流场的速度分布特性。研究表明:流体通过离心式旋流喷嘴的切向孔后变成旋转流体,从喷嘴出口螺旋喷出后,迅速由液柱变为沿一定的锥角扩散的液膜,液膜逐渐雾化为液滴;在喷嘴内部的旋转流体,其合速度与切向速度沿径向,都是先增加后减小;随着流通截面发生改变,其速度的变化主要发生在轴向分量上,切向速度的变化比较小;流体从旋流喷嘴喷出雾化,会在喷嘴出口中心轴线附近形成回流区;当管道中的流体具有一定的流速时,还会在喷嘴前壁边缘附近形成回流区。     

Physicochemical and technological properties of beef burger as influenced by the addition of pea fibre

This study aimed to evaluate the physicochemical characteristics and sensory attributes of beef burgers with the addition of pea fibre as a partial substitute of meat or fat. Three formulations were prepared: control (CON) – similar to the commercial formulation; fibre/less meat (FLM)—5% meat reduction and addition of 1% pea fibre; fibre/less fat (FLF)—7% fat reduction and addition of 1% pea fibre. Non-significant differences were obtained for pH, colour parameters (L* and b*), texture profile, cooking loss and size reduction among formulations. Moreover, sensory analysis with consumers of beef burgers did not indicate differences among the formulations for all the analysed attributes. Therefore, pea fibre is a promising partial replacer for meat and fat in beef burgers due to the preservation of technological parameters and sensory acceptance.     

泥沙自然堆积孔隙率计算的试验研究

泥沙孔隙率是泥沙研究的一个重要物理量,确定泥沙孔隙率与粒径的定量表达式具有重要意义。通过室内试验,采用排水体积法测量不同粒径组泥沙、均匀沙、混合沙的自然堆积孔隙率,验证了细颗粒泥沙比粗颗粒泥沙孔隙率大的一般性结论,并通过试验结果分析与拟合,给出了均匀沙自然堆积孔隙率的经验公式。同时,运用圆球模拟泥沙颗粒的方法求得均匀沙的理论孔隙率,当均匀沙的中值粒径小于4.5mm时,圆球理论孔隙率与实测孔隙率的相对误差小于3%,得到的理论孔隙率较可靠。     

Effects of three types of modified atmospheric packaging on the physicochemical properties of selected glutinous rice

The effect of modified atmospheric packaging (MAP) on the physicochemical properties of selected glutinous (Thadokkham-8 and Thadokkham-11) rice was studied and compared with a non-glutinous rice (Doongara). The freshly harvested/milled grains were packed in four different MAP conditions viz. control, vacuum, CO₂ and N₂ for 12 months at room temperature (23 ± 1 °C). Gas (N₂ or CO₂) was flushed in aluminum bags at the pressure of 300 kPa for 3 s and subsequently hermetically sealed. Vacuum packaging was done at −100 kPa. Results showed that ageing induced changes in the starch granules were less prominent in vacuum and/or MAP samples using CO₂ or N₂. Surface analysis showed that control storage significantly reduced the percentage of lipids and increased the percentage of proteins on the surface in all selected varieties. N₂ and CO₂ storage of TDK8 and DG slowed down the shift of properties of macromolecules and maintained the surface starch/proteins/lipids ratios during 6 months of storage. Moreover, the grains stored in vacuum maintained the lipids with lower proportion of proteins exposed to the surface after cooking. N₂ and CO₂ induced increase in pasting temperature but significant reduction in final viscosity when compared to control. The findings correlated well with thermal analysis. The in situ Thermal Mechanical Compression Test (TMCT) device cooking and texture analysis revealed that modified storage slightly slowed the ageing induced changes in the cooking quality and stickiness of glutinous rice. Among all storage conditions used vacuum was relatively the best to maintain the quality of the grain.