汉江上游干支流沉积物细菌群落多样性和影响因素

为了解汉江上游干支流沉积物细菌多样性以及确定性过程和随机性过程在沉积物细菌群落构建过程中的相对重要性,基于Illumina高通量测序技术,分析了环境因子对细菌群落组成的影响,采用非度量多维尺度(NMDS)排序探究了季节之间沉积物细菌群落的差异,并结合中性群落模型和标准化随机率量化了确定性过程和随机过程对群落构建的影响。结果表明:汉江上游及其支流细菌群落主要由变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)、蓝藻门(Cyanophyta)、浮霉菌门(Planctomycetes)和酸杆菌门(Acidobacteria)等组成；细菌群落在不同季节有显著差异；地理距离和环境因子对细菌群落结构影响较小,确定性过程并未在细菌群落组成中起到主导作用；随机过程很大程度上影响了群落在秋季和春季的组成,是沉积物细菌群落构建的主导因素。     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

Multidirectional focus measure for accurate three-dimensional shape recovery of microscopic objects

Shape from focus (SFF) is a technique to recover the shape of an object from multiple images taken at various focus settings. Most of conventional SFF techniques compute focus value of a pixel by applying one of focus measure operators on neighboring pixels on the same image frame. However, in the optics with limited depth of field, neighboring pixels of an image have different degree of focus for curved objects, thus the computed focus value does not reflect the accurate focus level of the pixel. Ideally, an accurate focus value of a pixel needs to be measured from the neighboring pixels lying on tangential plane of the pixel in image space. In this article, a tangential plane on each pixel location (i, j) in image sensor is searched by selecting one of five candidate planes based on the assumption that the maximum variance of focus values along the optical axis is achieved from the neighborhood lying on tangential plane of the pixel (i, j). Then, a focus measure operator is applied on neighboring pixels lying on the searched plane. The experimental results on both the synthetic and real microscopic objects show the proposed method produces more accurate three-dimensional shape in comparison to conventional SFF method that applies focus measures on original image planes.     

四川盆地磨溪地区灯四段风化壳岩溶储层特征

近年来，四川盆地磨溪地区灯四段的油气勘探取得了重大突破，为研究磨溪22井区灯四上亚段优质岩溶储层特征及分布规律，开展了岩心分析、物性测试、地震资料解释、测井分析和有利岩溶储层发育区预测等工作。结果表明：①岩溶储层的岩性主要为藻云岩类、砂屑云岩类和结晶云岩类，储集空间主要为溶蚀孔、溶洞和裂缝；②溶蚀作用包括同生期大气淡水的溶蚀作用、埋藏期深部热液溶蚀作用和有机酸的溶蚀作用、表生期大气淡水的溶蚀作用；③表生期的溶蚀作用控制了优质储层的分布，多发育于垂直渗流带附近和水平潜流带上部区域，平面上优质储层的分布受控于沉积相带和古地貌特征，以丘滩相和溶丘斜坡较好。该研究成果为磨溪地区下一步勘探指明了方向。     

换热网络优化的随机摄动方法及其应用

启发式算法在处理换热网络问题时具有可操作性强、搜索域大等优点,但由于局部解众多,算法很难寻得全局最优。本研究基于强制进化随机游走算法,以费用下降为强制进化方向,按照换热量最小,公用工程、流股匹配回路是否存在的优先顺序确定摄动对象;并以一定的概率对其进行随机地换热量线性变化或直接消去。重复寻找原结构下的更优分布或者新的网络结构。此外,引入梯度近似公式提高随机摄动方法的搜索精度。最后,通过计算10股流和20股流算例得到相较文献更低的年综合费用,分别为5 586 942和1 739 079$/a,证明该方法能够有效地促进换热网络结构进化,得到更优的网络结构。     

上保护层开采底板破坏深度和应力分析研究

上保护层开采导致的底板变形、应力释放会使被保护层内高瓦斯沿着上覆岩层内形成的空隙裂隙结构向上运移，很容易造成所采工作面采空区内瓦斯增加，造成工作面瓦斯超限。以峰峰集团以黄沙矿为研究实例，针对其主采的2号煤层利用FLAC^3D模拟软件进行上保护层开采底板应力研究，揭示了上保护层开采底板应力的规律特性，对于保护层开采工作瓦斯治理具有一定的指导意义。     

机翼极限环颤振的CFD/CSD全隐式紧耦合方法

针对轴承振动实时状态监控的需要，从符号动力学角度提出了符号聚合近似与Lempel-ziv复杂度（SAX-LZC）融合的振动监控参数。首先，以Logistic映射和Duffing方程为对象，从理论角度验证了SAX-LZC对动力学结构表征的准确性，并验证了该指标的抗噪能力和计算效率；其次，将SAX-LZC指标与信息熵、样本熵、多分段Lempel-ziv复杂度等动力学参数性能进行了综合对比；最后，从实验角度对轴承早期微弱异常进行了监测，并对轴承典型故障进行了特征提取。理论研究结果表明，SAX-LZC具有动力学结构表征准确、抗噪能力好、计算高效简洁等优点，克服了常规动力学参数工程应用能力弱的问题。实验研究结果表明，SAX-LZC对早期微弱异常有准确的监测，对不同种类故障具有较好的区分度，弥补了时域和频域对轴承微弱故障表征能力不足的缺陷，是一种轴承振动实时状态监控与故障特征提取的有效参数。     

Computing approximate blocking probabilities for transparent waveband switching based WDM networks using hierarchical cross-connects

An analytical model is presented to study the dynamics of wavelength division multiplexing (WDM) networks with waveband switching (WBS). The reduced load approximation method is considered to compute approximated network blocking probabilities in WBS-based WDM networks. The analytical model considers the link blocking probability due to insufficient link capacity and an impact of the waveband granularity (G). The analytical model also considers the node blocking probability due to unavailability of a switch port at the wavelength cross connect (WXC) layer of an Hierarchical cross connect (HXC) switch node. The set of nonlinear equations is obtained with the link independence assumption and solved using repeated substitutions. The accuracy of the analytical model is examined by comparing with simulation results considering the random-fit algorithm for waveband and wavelength assignments in different network scenarios. Lightpaths are routed between source and destination (s-d) HXC switch nodes using shortest path first (SPF) routing. An impact of the switch parameter to limit the input and the output WXC switch ports of an HXC switching node is also being investigated using the analytical model as well as through simulation results.     

高抽巷合理层位研究及分期配抽采空区瓦斯技术

针对郭庄煤矿采空区和邻近层瓦斯大量涌入回采工作面造成的上隅角超限频繁的问题，利用顶板裂隙移动规律及岩石物理力学参数，确定了高抽巷的最佳布置层位，经在3316回采工作面试验表明:第2阶段高抽巷小幅度开启抽采瓦斯最大浓度9.4%，瓦斯纯量4.65 m³/min，上隅角瓦斯浓度能控制在0.5%以内；第3阶段高抽巷全面开启抽采瓦斯浓度稳定在3%～4%，高抽巷混合流量225.21 m³/min，纯流量8.11 m³/min，上隅角瓦斯浓度能控制在0.4%以内。高抽巷分段配抽有效保障了工作面回采安全。