汉江上游干支流沉积物细菌群落多样性和影响因素

为了解汉江上游干支流沉积物细菌多样性以及确定性过程和随机性过程在沉积物细菌群落构建过程中的相对重要性,基于Illumina高通量测序技术,分析了环境因子对细菌群落组成的影响,采用非度量多维尺度(NMDS)排序探究了季节之间沉积物细菌群落的差异,并结合中性群落模型和标准化随机率量化了确定性过程和随机过程对群落构建的影响。结果表明:汉江上游及其支流细菌群落主要由变形菌门(Proteobacteria)、拟杆菌门(Bacteroidetes)、蓝藻门(Cyanophyta)、浮霉菌门(Planctomycetes)和酸杆菌门(Acidobacteria)等组成；细菌群落在不同季节有显著差异；地理距离和环境因子对细菌群落结构影响较小,确定性过程并未在细菌群落组成中起到主导作用；随机过程很大程度上影响了群落在秋季和春季的组成,是沉积物细菌群落构建的主导因素。     

Preparation and electrical conductivity of KTaO3-based proton conductor

KTaO₃ and KTa_0.9M_0.1O_3-α (M = Ti, Hf, Zr) were prepared by solid state reaction at 1330 °C for 2 h and characterized by x-ray diffraction. The AC impedance technique was used to analyze the sintered solid electrolytes in 1%H₂/Ar and dry air atmosphere. Among KTa_0.9M_0.1O_3-α (M = Ti, Hf, Zr), KTa_0.9Zr_0.1O_3-α displays the highest conductivity in 1%H₂/Ar atmosphere. The carriers transport numbers of solid electrolytes were measured by concentration cell method. The results show KTa_0.9Zr_0.1O_3-α is a pure proton conductor below 525 °C. Stability tests show that KTa_0.9Zr_0.1O_3-α has good chemical stability against CO₂ and H₂O.     

As the number falls,alternatives to the Hagberg–Perten falling number method: A review

This review examines the application, limitations, and potential alternatives to the Hagberg–Perten falling number (FN) method used in the global wheat industry for detecting the risk of poor end-product quality mainly due to starch degradation by the enzyme α-amylase. By viscometry, the FN test indirectly detects the presence of α-amylase, the primary enzyme that digests starch. Elevated α-amylase results in low FN and damages wheat product quality resulting in cakes that fall, and sticky bread and noodles. Low FN can occur from preharvest sprouting (PHS) and late maturity α-amylase (LMA). Moist or rainy conditions before harvest cause PHS on the mother plant. Continuously cool or fluctuating temperatures during the grain filling stage cause LMA. Due to the expression of additional hydrolytic enzymes, PHS has a stronger negative impact than LMA. Wheat grain with low FN/high α-amylase results in serious losses for farmers, traders, millers, and bakers worldwide. Although blending of low FN grain with sound wheat may be used as a means of moving affected grain through the marketplace, care must be taken to avoid grain lots from falling below contract-specified FN. A large amount of sound wheat can be ruined if mixed with a small amount of sprouted wheat. The FN method is widely employed to detect α-amylase after harvest. However, it has several limitations, including sampling variability, high cost, labor intensiveness, the destructive nature of the test, and an inability to differentiate between LMA and PHS. Faster, cheaper, and more accurate alternatives could improve breeding for resistance to PHS and LMA and could preserve the value of wheat grain by avoiding inadvertent mixing of high- and low-FN grain by enabling testing at more stages of the value stream including at harvest, delivery, transport, storage, and milling. Alternatives to the FN method explored here include the Rapid Visco Analyzer, enzyme assays, immunoassays, near-infrared spectroscopy, and hyperspectral imaging.     

Revisit the Pitot static tubes in the standards

A Pitot tube is a popular device used for the measurements of flow fields. To control the accuracy of the Pitot tube coefficient, the international standard organization (ISO), the American Society for Testing and Materials (ASTM), and the Japanese Industrial Standards (JIS) issued guidelines that recommended the shape and working conditions of these devices. However, many Pitot tubes on the market do not follow these guidelines. In the present study, various types of Pitot tubes in the market were tested at the National Metrology Institute of Japan (NMIJ) to determine the effects of the geometry and flow characteristics. The results revealed certain limitations in the existing ISO and JIS standards, specifically with regard to the recommended design parameters of the AMCA Pitot tube, the reference coefficient value for the JIS Pitot tube, and the redefinition and limitation of Reynolds numbers pertaining to Pitot tube working conditions.     

论携号转网行为的私法规制

以电信用户入网协议为切入点,电信用户的携号转网行为应受到《合同法》《消费者权益保护法》等私法规范的保护与限制。该行为引起的格式条款解释、合同终止、违约责任、损失赔偿等问题,不能仅靠《电信条例》等公法规范来调整。应当积极引导广大消费者用户以私法领域相关规定为依据,转变争议解决思维,拓宽纠纷处理途径,合理选择维权手段,以保护自身合法民事权益,与行业监管部门共同推动电信行业有序发展。     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

四川盆地磨溪地区灯四段风化壳岩溶储层特征

近年来，四川盆地磨溪地区灯四段的油气勘探取得了重大突破，为研究磨溪22井区灯四上亚段优质岩溶储层特征及分布规律，开展了岩心分析、物性测试、地震资料解释、测井分析和有利岩溶储层发育区预测等工作。结果表明：①岩溶储层的岩性主要为藻云岩类、砂屑云岩类和结晶云岩类，储集空间主要为溶蚀孔、溶洞和裂缝；②溶蚀作用包括同生期大气淡水的溶蚀作用、埋藏期深部热液溶蚀作用和有机酸的溶蚀作用、表生期大气淡水的溶蚀作用；③表生期的溶蚀作用控制了优质储层的分布，多发育于垂直渗流带附近和水平潜流带上部区域，平面上优质储层的分布受控于沉积相带和古地貌特征，以丘滩相和溶丘斜坡较好。该研究成果为磨溪地区下一步勘探指明了方向。     

A computational study of unsteady radiative magnetohydrodynamic Blasius and Sakiadis flow with leading‐edge accretion (ablation)

The present study investigates the influence of the magnetic field, thermal radiation, Prandtl number, and leading‐edge accretion/ablation on Blasius and Sakiadis flow. The convective boundary condition is employed to investigate the heat transfer. The nondimensional governing boundary layer equations have been solved by the homotopy analysis method for different values of the pertinent parameters. The effects of these parameters on the dimensionless velocity, temperature, skin friction, and Nusselt number are also investigated for various values of relevant parameters affecting the flow and heat transfer phenomena. The most relevant outcomes of the present study are that enhancement in magnetic field strength undermines the flow velocity establishing thinner velocity boundary layer for both Blasius and Sakiadis flows while an increase in accretion/ablation effect at leading‐edge manifests in a deceleration in velocity for Blasius case and the opposite trend is observed for Sakiadis flow. Another important outcome is that an increase in radiation and accretion/ablation at leading‐edge upsurges the fluid temperature leading to enhancement in the thermal boundary layer. For both Blasius and Sakiadis flow, the skin friction coefficient and the heat transfer rate decline with the enhancement of the leading‐edge accretion parameter. The results are compared with the existing data and are found in good agreement.