Nonsimilar solution of a boundary layer flow of a Reiner–Philippoff fluid with nonlinear thermal convection

The thermodynamics modeling of a Reiner–Philippoff-type fluid is essential because it is a complex fluid with three distinct probable modifications. This fluid model can be modified to describe a shear-thinning, Newtonian, or shear-thickening fluid under varied viscoelastic conditions. This study constructs a mathematical model that describes a boundary layer flow of a Reiner–Philippoff fluid with nonlinear radiative heat flux and temperature- and concentration-induced buoyancy force. The dynamical model follows the usual conservation laws and is reduced through a nonsimilar group of transformations. The resulting equations are solved using a spectral-based local linearization method, and the accuracy of the numerical results is validated through the grid dependence and convergence tests. Detailed analyses of the effects of specific thermophysical parameters are presented through tables and graphs. The study reveals, among other results, that the buoyancy force, solute and thermal expansion coefficients, and thermal radiation increase the overall wall drag, heat, and mass fluxes. Furthermore, the study shows that amplifying the space and temperature-dependent heat source parameters allows fluid particles to lose their cohesive force and, consequently, maximize flow and heat transfer.     

快速近似计算Shapley值的归因解释方法

Shapley值归因解释方法虽然能更准确量化解释结果, 但过高的计算复杂度严重影响了该方法的实用性. 本文引入KD树重新整理待解释模型的预测数据, 通过在KD树上插入虚节点, 使之满足TreeSHAP算法的使用条件, 在此基础上提出了KDSHAP方法. 该方法解除了TreeSHAP算法仅能解释树结构模型的限制, 将该算法计算Shapley值的高效性放宽到对所有的黑盒模型的解释中, 同时保证了计算准确度. 通过实验对比分析, KDSHAP方法的可靠性, 以及在解释高维输入模型时的适用性.     

Numerical simulation of the influence of confined multi-point ignited H2–O2 mixture on the propagation of shock waves towards a deformable plate

The study of shock wave propagation in a detonation chamber is of great importance as a part of the plate forming process. Investigations related to the effects of premixed gas detonation on the deflection of a plate require in-depth examination. An Eulerian-Lagrangian numerical simulation is conducted using the space-time conservation element and solution element method of LS-DYNA software to study the effect of confined multi-point ignited gaseous mixture on the dynamic response of thin plates clamped at the end of a combustion chamber. The FSI couples a Lagrangian finite element solver with a Eulerian fluid solver in a 2D space with detailed chemistry of H₂–O₂ mixture. The solution contains the detonation wave propagation through the combustion chamber and its interaction with the plate. The influence of variation in the multi-point ignition locations and combustion chamber dimensions on the pressure history and plate deflection is studied. To verify the model, a comparison with the experimental study is carried out using an adjustable model representative of the real experiment. The verified model is used to link the evolution of plate shape with the arrival time and intensity of shock waves within the chamber. It is found that a longer distance between the ignition point and the plate intensifies the ultimate deflection of the plate. In addition, a fairly large combustion area employed in a direction rather than transverse to the plate surface is unable to influence the ultimate deformation of the plate.     

珠江口盆地珠一坳陷古近系高自然伽马砂岩形成机制及油气地质意义

运用放射性元素寻找油气是一种非常规油气勘探手段。近年来,在珠江口盆地珠一坳陷富烃凹陷周边古近系钻遇高自然伽马(GR)砂岩,其GR值(100~300 API)甚至大于同区泥岩的GR值(100~200 API)。为了弄清该特殊现象背后的地质意义,对珠江口盆地珠一坳陷古近系高自然伽马砂岩开展了铀(U)、钍(Th)、钾(K)等3种元素含量与GR值的相关趋势线分析,从井震特征、岩性特征及矿物成分特征等入手分析了砂岩GR值增高的主要原因及成因机制,探讨了放射性元素聚集的条件、运移通道、驱动力以及油气意义。结果表明:西江、惠州地区由U含量增高导致砂岩GR值偏高,恩平、番禺地区由K,Th含量增高导致砂岩GR值偏高;砂岩GR值增高有两大成因机制,一是地下流体带来的放射性元素离子U4+在氧化-还原面处富集后导致地层GR值偏高,这种特殊现象说明在具有连通基底大断裂旁的圈闭中,U4+的富集指示了曾经油气的存在,证实了研究区油气运移通道的有效性,对于油气藏的预测有着非常重要的指导性意义,二是地表流体带来的含放射性元素的矿物大量沉积后导致地层GR值偏高,含放射性元素矿物性质不稳定,可指示近源供给的存在,对于判断物源及沉积环境有着非常重要的意义。该研究成果为预测研究区油气成藏有利区带提供了依据。     

Multidirectional focus measure for accurate three-dimensional shape recovery of microscopic objects

Shape from focus (SFF) is a technique to recover the shape of an object from multiple images taken at various focus settings. Most of conventional SFF techniques compute focus value of a pixel by applying one of focus measure operators on neighboring pixels on the same image frame. However, in the optics with limited depth of field, neighboring pixels of an image have different degree of focus for curved objects, thus the computed focus value does not reflect the accurate focus level of the pixel. Ideally, an accurate focus value of a pixel needs to be measured from the neighboring pixels lying on tangential plane of the pixel in image space. In this article, a tangential plane on each pixel location (i, j) in image sensor is searched by selecting one of five candidate planes based on the assumption that the maximum variance of focus values along the optical axis is achieved from the neighborhood lying on tangential plane of the pixel (i, j). Then, a focus measure operator is applied on neighboring pixels lying on the searched plane. The experimental results on both the synthetic and real microscopic objects show the proposed method produces more accurate three-dimensional shape in comparison to conventional SFF method that applies focus measures on original image planes.     

Meticulously tailoring phase boundary in KNN-based ceramics to enhance piezoelectricity and temperature stability

Although KNN-based ceramics with high electrical properties are obtained through a variety of strategies, the temperature sensitivity is still one of the key technical bottlenecks hindering practical applications. Here, we use a new strategy, meticulously tailoring phase boundary, to refine the ferroelectric boundary of KNN-based ceramics, leading to high piezoelectricity companied with improving temperature stability. The highest d₃₃ value in this system reaches 501 pC/N with a T_C ∼ 240°C, whereas a large strain of ∼0.134% can be kept with 10% lower deterioration until 100°C. The origin of high piezoelectricity is mainly attributed to the well-preserved multiphase coexistence and the appearance of nanodomains, which greatly facilitate the polarization rotation. Instead of the changed intrinsic thermal insensitivity, the precision phase boundary engineering plays an important role in strengthening the temperature stability of electric-induced strain. This work provides a simple and effective method to obtain both high electrical properties and excellent thermal stability in KNN-based ceramics, which is expected to promote the practical applications in the future.     

基于亚像素边缘检测的纱线条干均匀度测量

为了精确地评价纱线的表观条干均匀性,提出一种基于亚像素边缘检测的纱线条干均匀度检测方法。首先通过图像采集装置获取纱线图像;然后对纱线图像进行亚像素边缘检测获取纱线边缘点集;利用开运算对获取的边缘点集进行处理,进而获得纱线条干的边缘;最后采用坐标直方图方法计算纱线平均直径和条干CV值。为验证方法的有效性和准确性,对多种不同线密度的纯棉纱线进行测试,并将测试结果与电容式条干仪的均匀度检测及基于模糊C均值分类和Otsu图像法的检测结果进行了对比。结果表明:基于亚像素边缘检测的纱线条干均匀度检测方法与电容式的测量结果有着较好的一致性,证明所提方法可得到准确的结果。     

织物结构参数对热传递性能影响的模拟分析

为方便快捷构建出接近三原组织织物真实结构的三维几何模型,应用图像处理技术对织物截面提取特征点,基于Newton插值公式拟合纱线中心线方程进而建立织物模型,而后在有限元软件中设置材料取向、定义边界条件,对三原组织织物的热传递性能进行数值模拟,通过实验验证了有限元方法及模型的有效性。之后预测了织物紧度对织物热传递性能的影响。结果表明:在相同织物紧度的条件下,平纹织物的热传递性能最好,其次是斜纹织物,最后是缎纹织物;在一定范围内,随着织物紧度的增加,织物的导热性能逐渐增加。     

基于AHP的旗袍胸部压力舒适性研究

为改善旗袍胸部牵制感与压迫感,提高旗袍的胸部压力舒适性,对同一结构规格旗袍的门襟、袖型及穿脱方式进行设计组合,利用正交试验制作旗袍样衣,测试出受试者在规定动作下的主客观压力值,并利用AHP法对主客观数据进行综合分析,得出对旗袍压力舒适性影响最大的设计因素及动作。结果表明,双侧门襟、无袖及前门襟穿脱方式的设计因素可以在一定程度上缓解旗袍胸部牵制感和压迫感,提高穿着舒适性;其中袖型因素服装压力值波动最大,对旗袍胸部压力舒适性影响程度更为显著;而规定动作中双手背后这一动作所占权重最高,对旗袍胸部压力舒适性的影响最大。     

基于混合蚁群算法的异质车队低碳VRP研究

针对货运车辆在配送调度过程中产生大量碳排放的问题，建立模型将多种影响碳排放量的因素协同优化。模型中考虑了不同载重量的异质车队，两个节点之间有多条道路的柔性路径，以及车辆重量随卸货而减少的动态负载等因素，以碳排放量、行驶时间和行驶路程为优化目标，并加入了节点需求时间窗、根据速度变化划分路段、交接和卸货时间的约束。提出了一种混合蚁群算法，利用蚁群算法信息素强度更新方式保持群体记忆性，利用粒子群算法的快速收敛特性增加计算效率。通过随机数值算例的仿真优化与对比分析，验证了算法和模型的有效性。