Solution plasma-assisted preparation of highly dispersed NiMnAl-LDO catalyst to enhance low-temperature activity of CO2 methanation

In this work, the solution plasma-assisted method was used to prepare NiMnAl-LDO (layered double oxides) catalysts with different treatment times, which were used for the CO₂ methanation reaction. Solution plasma treatment can enhance the dispersibility of the catalyst, create oxygen defects and improve the chemical adsorption capacity of the catalyst. The results show that the low-temperature activity of the catalyst has been improved after the solution plasma treatment. We demonstrate that the NiMnAl-LDO-P(20) catalyst with high dispersion has the highest catalytic activity in CO₂ methanation (81.3% CO₂ conversion and 96.7% CH₄ selectivity at 200 °C). Even though working for 70 h, the catalyst is still highly stable. This work provides a great promise for improving the low-temperature activity of Ni-based catalysts.     

基于组合双向拍卖的云资源调度方法

针对跨数据中心的资源调度问题，提出了一种基于组合双向拍卖（PCDA）的资源调度方案。首先，将云资源拍卖分为三个部分：云用户代理报价、云资源提供商要价、拍卖代理组织拍卖；其次，在定义用户的优先级及任务紧迫度的基础上，在拍卖过程中估算每一个工作发生的服务等级协议（SLA）违规并以此计算云提供商的收益，同时每轮竞拍允许成交多项交易；最终达到根据用户等级合理分配云资源调度的效果。仿真实验结果表明该算法保证了竞拍成功率，与传统一次拍卖成交一项的组合双向拍卖方案相比，PCDA在竞拍时间段产生的能耗降低了35.00%，拍卖云提供商的利润提高了约38.84%。     

二里河铅锌矿井下支护方案综述

为总结出一套适合矿山实际的支护方案，二里河铅锌矿在矿山生产的20余年里，引进了多种支护工艺进行试验。矿山根据井巷、硐室所处工程环境，确定了锚杆、钢筋、钢架、混凝土进行单一或组合支护的方案，特别是千枚岩内12.4 m跨度的提升机硐室支护方式与参数，对矿山软弱岩层大跨度硐室工程支护具有参考价值。采场则按照急倾斜、缓倾斜矿体上盘千枚岩支护为例，分别列举了锚杆、锚杆+锚索支护的工程方案。采场联络巷、矿房行人通道等区域利用支柱+横梁临时支护。不但提高了采场作业安全性，也使采矿损失率降低5%，贫化率降低7%。     

300MW等级锅炉变工况低负荷稳燃能力数值模拟与预测

采用数值模拟软测量技术,在保证锅炉燃烧稳定和炉内温度较高水平的条件下,预测300 MW等级锅炉在实际运行中可降低到25%负荷稳定燃烧,并经过现场低负荷稳燃实验对结果进行验证。针对一次风速调整、磨煤机投运方式调整和配风方式及运行氧量调整三种方式对低负荷稳燃能力的影响进行分析,结果表明:在降负荷过程中调平一次风速偏差并适当降低一次风速,投运相邻层燃烧器,关小周界风,适当降低二次风量的同时适当降低运行氧量有利于提高低负荷稳燃特性。     

基于稳定连接的配电网边缘划分方法及应用研究

随着能源互联网的建设,为了应对配电主站所面临的数据接入和计算压力,文章提出了二级配电网边缘架构,以分布式边缘智能架构缓解主站压力。主要从边缘定义、划分方法、边缘功能描述与交互描述4个方面对所提边缘架构进行介绍。提出电网稳定连接区域概念及其生成方法,并结合南京地区电网实例,说明了以电网稳定连接区域作为边缘划分的合理性。最后,对所提边缘架构在配电网中的实际应用场景进行了设计和展望。     

Thermodynamic Analysis of Packed Bed Thermal Energy Storage System

A packed-bed thermal energy storage(PBTES) device, which is simultaneously restricted by thermal storage capacity and outlet temperatures of both cold and hot heat transfer fluids, is characterized by an unstable operation condition, and its calculation is complicated. To solve this problem, a steady thermodynamics model of PBTES with fixed temperatures on both ends was built. By using this model, the exergy destruction, thermocline thickness, thermal storage capacity, thermal storage time, and other key parameters can be calculated in a simple way. In addition, the model explained the internal reason for the change of thermocline thickness during thermal storage and release processes. Furthermore, the stable operation of the PBTES device was analyzed, and it was found that higher inlet temperature of hot air, and lower temperature difference between cold and hot air can produce less exergy destruction and achieve a larger cycle number of stable operation. The work can be employed as the basis of the design and engineering application of PBTES.     

On the limit theory of the Gaussian SQMLE in the EGARCH(1,1) model

We derive the limit theory of the Gaussian stable quasi maximum likelihood estimator for the stationary EGARCH(1,1) model when the squared innovation process has marginals with regularly varying tails. We derive regularly varying rates and limiting stable distributions. We perform Monte Carlo experiments to assess the extent of the parameter space corresponding to the invertibility condition, and the quality of the asymptotic approximation.