成型温度对PBX装药内部质量及性能的影响

针对压制成型的PBX炸药装药，选择CT无损检测、巴西实验和扫描电镜检测等技术，对比研究了室温和加热两种温度下压制成型的炸药装药内部质量、静态力学性能和细观破坏形式。结果表明，加热压制有利于改善炸药装药的内部质量，可避免产生初始损伤，且提高了装药的力学性能。细观尺度上，室温压制成型的装药主要发生界面脱黏破坏，加热压制成型装药的主要破坏形式是穿晶断裂。     

Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Fuel-oxidizer mixtures: a lab and field study

ABSTRACT

Improvised explosive may be as primitive as a fuel and oxidizer mixture; yet not all fuel-oxidizer mixtures are explosive. Predicting explosive potential from laboratory-scale tests is desirable to screen a large matrix of potential threats in varying concentrations. Herein the properties of various fuel/oxidizer mixtures were measured at small scale (2 g) with bomb calorimetry and on large scale (5 kg) with high speed photography for detonation velocity and with piezoelectric pressure probes for TNT air blast equivalence. Potassium nitrate (KN), potassium chlorate (KC), potassium permanganate (KMnO₄), potassium iodate (KIO₃), ammonium nitrate (AN), and ammonium perchlorate (AP) were prepared with sucrose (Su) and aluminum (Al) fuel. Results were compared to each other as well as predictions from Cheetah thermochemical code.     

Development of the method of production of the ultrafine macrohomogeneous composite powder

ABSTRACT

A method of ultrafine macro-homogeneous composite powder – B₄C–ZrO₂ production using a planetary mill was developed. From the macro-homogeneous composite high-density ceramics, B₄C–ZrB₂ was produced by the method of reactive sintering (in situ) at 2000°C under the pressure of 41–42?MPa. The effect of ZrO₂ grain size and of its distribution in the matrix on the consolidation parameters, and the microstructure of the obtained ceramics was studied.     

闪蒸纺纳微米纤维非织造技术的研究进展

为拓展纳微米纤维的制备方法,拓宽防护服面料的来源,对闪蒸法制备纳微米纤维非织造布及其用于防护服的研究进展进行综述。介绍了闪蒸纺丝所用原料的种类及目前存在的问题,对纺丝工艺、纺丝过程及产品进行阐述;总结了闪蒸纺丝技术国内外研究现状及趋势,分析了闪蒸非织造布的特点和应用;讨论了闪蒸非织造布防护服的分类以及目前使用中存在的问题;最后提出闪蒸纺丝技术是目前发展前景良好的纳微米纤维非织造布制备技术,闪蒸非织造布可作为一种理想的防护服面料,发展该技术对提高我国非织造行业技术水平,保护人民生命健康具有重要意义。     

Stability analysis and characterization of the nano emulsified Jatropha-curcas-based bio-fuel

This work investigates the suspension duration of the nanosized multiwalled carbon nanotubes (MWCNT) and aluminum oxide (Al₂O₃) in B20, B50 and B70 blends of Jatropha Methyl ester. The MWCNT and aluminum oxide (Al₂O₃) are added to the fuel blends in the proportions of 50 and 100 pmm separately by ultra sonication. The prepared fuel samples are characterized, and turbidity analysis was done to find the stability rate of nano-additives. The outcomes reveal the maximum stability rate for MWCNT and Al₂O₃ as 83.3% and 87.03%, respectively, with 50ppm in B20 over a period of eighteen days. A considerable drop in suspension was observed with the 100 ppm MWCNT and Al₂O₃ biodiesel blends.     

煤田地震勘探中多井组合爆炸法浅析

地震勘探中炸药作为激发震源的激发条件多样,采用有效的震源激发方式,才能取得高信噪比的地震原始数据。本文依据有关爆破原理,理论结合实践经验,提出在厚黄土区采用多井组合的激发方式,能有效压制噪声,增强性噪比,提高数据质量。     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

Multifunctional Hydrophobized Microparticles for Accelerated Wound Healing after Endoscopic Submucosal Dissection

Endoscopic submucosal dissection (ESD) provides strong therapeutic benefits for early gastrointestinal cancer as a minimally invasive treatment. However, there is currently no reliable treatment to prevent scar contracture resulting from ESD which may lead to cicatricial stricture. Herein, a multifunctional colloidal wound dressing to promote tissue regeneration after ESD is demonstrated. This sprayable wound dressing, composed of hydrophobized microparticles, exhibits the multifunctionality necessary for wound healing including tissue adhesiveness, blood coagulation, re‐epithelialization, angiogenesis, and controlled inflammation based on hydrophobic interaction with biological systems. An in vivo feasibility study using swine gastric ESD models reveals that this colloidal wound dressing suppresses fibrosis and accelerates wound healing. Multifunctional colloidal and sprayable wound dressings have an enormous therapeutic potential for use in a wide range of biomedical applications including accelerated wound healing after ESD, prevention of perforation, and the treatment of inflammatory diseases.     

Corrosion and mechanical properties of plasma electrolytic oxidation‐coated AZ80 magnesium alloy

Plasma electrolytic oxidation (PEO) coatings were produced on AZ80 magnesium alloy in a solution containing silicates and phosphates and working at high current densities with short treatment times. The effect of a sealing treatment in boiling water on corrosion and mechanical properties of the coatings were investigated. Moreover, the corrosion mechanism of the samples with and without the sealing treatment was evaluated. The microstructure of the coatings was characterized with scanning electron microscope observation and X‐ray diffraction analysis. The mechanical properties were evaluated with nanoindentation tests and the corrosion resistance was studied by potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning vibrating electrode technique. The results showed that the sealing did not influence the microstructure and the mechanical properties of the samples and instead produced a remarkable increase in the corrosion resistance. The crevice corrosion, present in the sample without the sealing, was avoided with the treatment in boiling water.