Corrosion behaviour of Mg-Gd-Y-Zn-Ag alloy components with different sizes after cooling

The corrosion behaviour of Mg-6Gd-3Y-1Zn-0.3Ag (wt.%) alloy components with different sizes after cooling was investigated. The alloys in the small components (SC) cooled fast, which were composed of α-Mg matrix and coarse long-period stacking ordered (LPSO) phases. The alloys in the large components (LC) cooled slowly, and there were thin lamellar LPSO phases precipitating inside the grains, except for α-Mg matrix and coarse LPSO phases. The hydrogen evolution test revealed that the corrosion rate of LC sample was higher than that of SC sample. Electrochemical impedance spectroscopy (EIS) test showed that the surface film on LC alloys provided worse protection. The corrosion morphologies indicated that the precipitation of the thin lamellar LPSO phases in LC sample caused severe micro-galvanic corrosion, which accelerated the rupture of the surface film.     

Elliptical distribution-based weight-determining method for ordered weighted averaging operators

The ordered weighted averaging (OWA) operators play a crucial role in aggregating multiple criteria evaluations into an overall assessment supporting the decision makers’ choice. One key point steps is to determine the associated weights. In this paper, we first briefly review some main methods for determining the weights by using distribution functions. Then we propose a new approach for determining OWA weights by using the regular increasing monotone quantifier. Motivated by the idea of normal distribution-based method to determine the OWA weights, we develop a method based on elliptical distributions for determining the OWA weights, and some of its desirable properties have been investigated.     

Microstructure and Mechanical Properties of Mg–RE–TM Cast Alloys Containing Long Period Stacking Ordered Phases: A Review

Casting magnesium alloys hold the greatest share of magnesium application products due to their short processing period, low cost and near net shape forming. Compared with conventional commercial magnesium alloys or other Mg–RE-based alloys, the novel Mg–RE–TM cast alloys with long period stacking ordered(LPSO) phases usually possess a higher strength and are promising candidates for aluminum alloy applications. Up to now, two ways: alloying design and casting process control(including subsequent heat treatments), have been predominantly employed to further improve the mechanical properties of these alloys. Alloying with other elements or ceramic particles could alter the solidifi cation pattern of alloys, change the morphology of LPSO phases and refi ne the microstructures. Diff erent casting techniques(conventional casting, rapidly solidifi cation, directional solidifi cation, etc.) introduce various microstructure characteristics, such as dendritic structure, nanocrystalline, metastable phase, anisotropy. Further heat treatments could activate the transformation of various LPSO structures and precipitation of diverse precipitates. All these evolutions exert great impacts on the mechanical properties of the LPSO-containing alloys. However, the underlying mechanisms still remain a subject of debate. Therefore, this review mainly provides the state of the art of the casting magnesium alloys research and the accompanying challenges and summarizes some topics that merit future investigation for developing high-performance Mg–RE–TM cast alloys.     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

Isothermal crystallization kinetics and subsequent melting behavior of β‐nucleated isotactic polypropylene/graphene oxide composites with different ordered structure

The effects of ordered structure on isothermal crystallization kinetics and subsequent melting behavior of β‐nucleated isotactic polypropylene/graphene oxide (iPP/GO) composites were studied using differential scanning calorimetry. The ordered structure status was controlled by tuning the fusion temperature (T_f). The results showed that depending on the variation of crystallization rate, the whole T_f range could be divided into three regions: Region I (T_f > 179 °C), Region II (170 °C ≤ T_f ≤ 179 °C) and Region III (T_f < 170 °C). As T_f decreased from Region I to Region III, the crystallization rate would increase substantially at two transition points, due to the variation of the ordered structure status. Calculation of Avrami exponent n indicated that the ordered structure induced the formation of two‐dimensional growing crystallites rather than three‐dimensional growing crystallites. Moreover, in the case of isothermal crystallization, the ordered structure effect (OSE) can also greatly increase the relative content of β‐phase (β_c). In Region II, OSE took place, resulting in evident increase of β_c, achieving 92.4% at maximum. The variation of the isothermal crystallization temperature (T_iso) had little influence on the T_f range (Region II) of the OSE. The higher T_f in Region II was more favorable for the formation of higher β_c. The ordered structure was favorable for the improvement of the nucleating efficiency of β‐nucleating agent (β‐NE), and was more effective for the improvement of lower β‐NE. © 2018 Society of Chemical Industry     

On lattice ordered soft sets

Certain type of linguistic terms such as satisfactory, good, very good and excellent have an order among them. In this paper we introduce a new concept of soft sets with some order among the parameters. Some properties of lattice ordered soft sets are given. Lattice ordered soft sets are very useful in particular type of decision making problems where some order exists among the elements of parameters set.     

NiCrAlFe精密电阻合金中的L12有序结构研究

有序结构的形成是决定NiCrAlFe精密电阻合金电学性能的关键因素。本文利用第一性原理赝势平面波方法，计算了合金处于无序固溶体结构和形成L12型有序结构时的结合能、态密度、晶格常数等参数，并利用高分辨透射电子显微镜（HRTEM）对合金进行了结构表征，还测试了固溶态和时效态的电阻率。从结合能来看，该合金形成L12有序结构时比无序固溶体更加稳定；态密度以及部分态密度计算结果则表明，在L12有序结构中，Ni、Cr、Al、Fe会强烈成键而使得整个合金体系变得稳定；HRTEM分析结果证明固溶态合金经过和时效处理后出现了L12有序结构，而且该有序结构的晶格常数与计算值基本一致。对比无序固溶体与L12型有序结构费米能级处的态密度值发现，当形成L12有序结构时合金的导电能力较无序固溶体下降，电阻率升高，与实际测试结果吻合。     

多孔金属结合剂CBN砂轮孔隙结构对磨料层胎体力学性能的影响

为解决多孔金属结合剂CBN砂轮在高孔隙率下的强度下降问题，采用球形尿素颗粒为造孔剂，制作孔径、孔形和孔隙可控的多孔金属结合剂砂轮磨料层胎体，研究不同载荷情况下的孔隙率和孔隙排布等孔隙结构因素，对多孔金属结合剂磨料层胎体力学性能的影响规律。结果表明:孔隙有序排布时的胎体弹性模量要小于孔隙无序排布的；胎体材料的屈服强度随孔隙率增大而下降；在相同孔隙率下，孔隙有序排布的胎体，在纵向受压、孔隙正向排布的情况下屈服强度更高。      

Controlling Corrosion Resistance of a Biodegradable Mg–Y–Zn Alloy with LPSO Phases via Multi-pass ECAP Process

Mg-RE(rear earth) alloys with long period stacking(LPSO) structures have great potential in biomedical applications. The present work focused on the microstructure and corrosion behaviors of Mg 98.5 Y_1 Zn_(0.5) alloys with 18 R LPSO structure after equal channel angular pressing(ECAP). The results showed that the ECAP process changed the grain size and the distribution of LPSO particles thus controlled the total corrosion rates of Mg 98.5 Y_1 Zn_(0.5) alloys. During the ECAP process from 0 p to 12 p, the grain size reduced from 160–180 μm(as-cast) to 6–8 μm(12 p). The LPSO structures became kinked(4 p), then started to be broken into smaller pieces(8 p), and at last comminuted to fine particles and redistributed uniformly inside the matrix(12 p). The improvement in the corrosion resistance for ECAP samples was obtained from 0 p to 8 p, with the corrosion rate reduced from 3.24 mm/year(0 p) to 2.35 mm/year(8 p) in simulated body fluid, and the 12 p ECAP alloy exhibited the highest corrosion rate of 4.54 mm/year.     

Novel porous perovskite composite CeO2@LaMnO3/3DOM SiO2 as an effective catalyst for activation of PMS toward oxidation of urotropine

Perovskites with stable crystal structure and excellent catalytic performance have attracted extensive attention in peroxomonosulfate (PMS) activation, however, severe agglomeration has always been the main obstacle limiting the catalytic activity of them, so novel perovskite catalysts are urgently needed. In this study, three-dimensional ordered macroporous silica (3DOM SiO₂) was prepared by colloidal crystal template method, then CeO₂@LaMnO₃/3DOM SiO₂ was prepared by sol-gel method combined with impregnation method and used to activate PMS for urotropine (URO) degradation. CeO₂@LaMnO₃/3DOM SiO₂ activated PMS system exhibited high URO removal efficiency and quick kinetic, as 99.98 % URO was degraded even within 30 min. The catalyst has a wide pH range and still has high catalytic activity in the presence of organic matter and inorganic ions. The three components in CeO₂@LaMnO₃/3DOM SiO₂ showed a synergetic effect. CeO₂ and LaMnO₃ were uniformly loaded on 3DOM SiO₂, which effectively avoided agglomeration. The specific surface area of CeO₂@LaMnO₃/3DOM SiO₂ was 11.88 times that of LaMnO₃ prepared by sol-gel method. There are two redox cycles of Ce³⁺/Ce⁴⁺ and Mn²⁺/Mn³⁺/Mn⁴⁺ in CeO₂ and LaMnO₃, respectively, which synergistically realize the activation of PMS. Both quenching experiments and electron paramagnetic resonance (EPR) analysis revealed that that SO₄^?, OH and ¹O₂ jointly achieved the degradation of URO. In summary, CeO₂@LaMnO₃/3DOM SiO₂ would be a promising candidate for practical wastewater treatment.