Systematic analysis and multi-objective optimization of an integrated power and freshwater production cycle

This study represents the results of the analysis and optimization of an integrated system for cogenerating electricity and freshwater. This setup consists of a Solid Oxide Fuel cell (SOFC) for producing electricity. Unburned fuel of the SOFC is burned in the afterburner to increase the temperature of the SOFC's outlet gasses and operate a Gas turbine (GT) to produce additional power and operate the air compressor. At the bottom of this cycle, a combined setup of a Multi-Effect Desalination (MED) and Reverse Osmosis (RO) is considered to produce freshwater from the unused heat capacity of the GT's exhaust gasses. Also, a Stirling engine is used in the fuel supply line to increase the fuel's temperature. Using LNG and the Stirling engine will replace the fuel compressor with a pump which increases the system performance and eliminates the need for the expansion valve. To study the system performance a mathematical model is developed in Engineering Equation Solver (EES) program. Then, the system's simulated data from the EES has been sent to MATLAB to promote the best operating condition based on the optimization criteria. An energetic, exergetic, economic, and environmental analysis has been performed and a Non-dominated Sorting Genetic Algorithm (NSGA-II) is used to achieve the goal. The two-objective optimization is performed to maximize the exergetic efficiency of the proposed system while minimizing the system's total cost of production. This cost is a weighted distribution of the Levelized Cost of Electricity (LCOE) and Levelized Cost of freshwater (LCOW). The results showed that the exergetic and energetic efficiencies of the system can reach 73.5% and 69.06% at the optimum point. The total electricity production of the system is 99 MW. The production cost is 11.71 Cents/kWh, of which 1.04 Cents/kWh is emission-related and environmental taxes. The freshwater production rate is 42.44 kg/s which costs 4.38 USD/m³.     

Hydrogen-rich gas generation via the exhaust gas-fuel reformer for the marine LNG engine

Reformed exhaust gas recirculation technology has attracted great attention in internal combustion engines. A platform of an exhaust gas-fuel reformer connected with the marine LNG engine was set up for generating on-board hydrogen. Based on the platform, effects of the methane to oxygen ratio (M/O) and reformed exhaust gas ratio (R_EG) from the reformer and excess air ratio (λ) from the engine on the components, hydrogen yield, thermal efficiency and reforming process of the reformer were experimentally investigated. Results shown that hydrogen-rich gases (reformate) can be generated by reforming the mixture of engine exhaust gas (about 400 °C) and methane supplied via the reformer with Ni/Al₂O₃ catalyst, and the hydrogen concentration of reformate was between 6.2% and 12.6% by volume. The methane supplied rate and λ affected the components and temperature of the reactant in the reformer, while R_EG changed the gas hour space velocity during the exhaust gas-fuel reforming processes, resulting in the difference in the components of the reformate and thermal efficiency. At the present experimental condition, the highest H₂ concentration reformate was generated under the M/O of 2.0, λ of 1.55 and R_EG of 6%.     

Use of La2O3 with 8YSZ as thermal barrier coating and its effect on thermal cycle behavior,microstructure, mechanical properties and performance of diesel engine operated by hydrogen-algae biodiesel blend

In this present work, the effect of lanthanum oxides (La₂O₃) on the thermal cycle behavior of TBC coatings and mechanical properties such as adhesion strength and microhardness of 8% Yttria Stabilized Zirconia (8YSZ) TBCs were investigated. CoNiCrAlY and aluminium alloy (Al–13%Si) were used as bond coat and substrate materials. 8YSZ and different wt % of La₂O₃ (10, 20, and 30%) top coatings were applied using the atmospheric plasma spray (APS) method. The thermal cycling test for TBC coated samples were conducted at 800 °C in the electric furnace. The XRD pattern shows that the La₂O₃ doped 8YSZ material transformed to cubic pyrochloric structured La₂Zr₂O₇ during thermal cycling. Further, the Taguchi-based grey relation analysis (GRA) method was applied to optimize the TBC coating parameters to achieve better mechanical properties such as adhesion strength and microhardness. And the optimized La₂O₃/8YSZ TBC coating was coated on CRDI engine combustion chamber components. The engine was tested with microalgae biodiesel and hydrogen, and the results were promising for the TBC-coated engine. The engine performance increased while using La₂O₃/8YSZ coated components, and the emissions from engine exhaust gas such as CO, HC, and smoke reduced considerably. It was found that there was no separation crack and spallation of the coating layer in the microstructure. Ultimately, the microstructural analysis of the optimized TBC coated piston sample after 50 h of running in the diesel engine confirmed that the developed coating had a superior thermal insulation effect and longer life.     

基于等压差水膜的柴油机尾气净化装置研究

开发设计了一款新型尾气颗粒物过滤净化装置,该装置利用颗粒物惯性作用和水膜吸附效应实现颗粒物与柴油机尾气的分离。通过分析计算得到形成湿润壁面连续水膜的条件。选择合适的波形板面,搭建柴油机尾气颗粒物检测系统。试验结果表明,设计的柴油机尾气颗粒净化装置可以起到很好地净化颗粒物的作用,尤其是在柴油机刚刚启动低速运转的情况下净化效率高。     

PA6B柴油机进排气阀断裂原因分析

针对PA6B柴油机进排气阀断裂故障,根据现场勘验情况并结合该柴油机当时的热工参数,建立相应的故障树;对制造质量、装配质量、配气定时、异物进入、热工参数等因素进行逐一排查。结果表明:导致PA6B柴油机进排气阀断裂的原因为喷油器制造质量存在问题。     

ACD320DF双燃料发动机调速执行机构设计分析

针对ACD320DF发动机进行调速执行机构设计;采用PROE软件对所设计的调速执行机构进行建模并做仿真分析。分析结果表明:现有燃油供给系统能灵活加减油门,实现对发动机的有效控制;起动瞬间是弹簧连接杆受力最大时刻,此刻的受力可作为弹簧连接杆设计的主要依据;优化后的结构能适应双倍的齿条阻力。     

Effects of hydrogen direct injection on engine stability and optimization of control parameters for a combined injection engine

As engine stability is a crucial issue for engine performance and toxic emissions, an experimental research has been conducted to analyze the effects of hydrogen direct injection on engine stability. The experiments have been divided into two parts. The first set is aimed to analyze different parameter characteristics with and without hydrogen direct injection, and the second set tries to find optimal control regions. Excess air ratios, spark timings, engine speeds and engine loads are chosen as primary parameters in the study. The results show hydrogen addition can increase brake thermal efficiency by a range from 6% to 13%, enhancing the lean burn performance. Combustion duration has been shortened to about 80% by adding 10% hydrogen mixture into gasoline. Besides, Hydrogen addition makes the mixture further insensitive to ignition timings, and narrows the optimal regions with higher excess air ratios. Under medium engine speeds, the highest CoV_IMEP locates in the low load region for pure gasoline, while this maximum value appears in the medium load region for 10% hydrogen mixture. In addition, the specific value of CoV_IMEP with 10% hydrogen is rather small compared to pure gasoline. Thus, hydrogen direct injection can significantly improve engine stability and reduce controlling difficulties.     

“电网一张图”时空信息管理系统

文章首先总结了电力企业信息管理系统的现状,提出了多源信息管理系统融合集成的邦联、子集和完全融合3种方式,分析了3种方式的优缺点,以建设企业"互联网搜索"型数字引擎为目标,提出了融合基于本体的图数据库建模,多维关联与路径因果分析,和人机共生互动可视化决策于一体的企业信息管理系统技术发展趋势;在系统分析目前正在快速发展的图数据库技术与传统关系数据库之间的本质区别基础上,总结原创的电力图计算平台技术的特点;在此基础上讨论"电网一张图"在建设能源互联网时空信息管理平台数据关联索引图中的核心作用,提出了支持能源互联网建设的"电网一张图"时空信息管理系统的技术架构与特点,最后总结"电网一张图"时空信息管理系统在提高电网安全运行水平、提升客户服务水平、增强清洁能源消纳水平、改善经营绩效水平、以及为综合能源服务和建设能源生态等提供数据服务方面的广阔应用场景。     

150单缸机试验台冷却系统流动与传热计算分析

基于Flowmaster软件建立了150单缸柴油机试验台冷却系统流动与传热模型,并在某大功率发动机上进行了验证。在此基础上分析得到了冷却水温度和流量、气缸套和气缸盖温度变化对冷却水总传热流量的影响规律,以及管道尺寸、壁面粗糙度、冷却水流量对冷却水流动总阻力的影响规律。     

船舶柴油机在用润滑油的现场监测

针对船舶柴油机在用润滑油的现场监测问题,研究确定了监测参数为水分、黏度、红外特征、元素浓度和铁磁性磨粒总量,并选择了相应的测量仪器。爆裂法水分现场快速检测仪可有效、快速判别含水量大于0.2%的油样;基于Hele-Shaw原理的黏度快速检测仪重复性误差小于3%,具有工程实用价值;安捷伦傅里叶红外光谱仪可用于监测在用油的红外特征变化;可采用基于电磁感应原理的铁量仪测量油样中的铁磁性磨粒总量;转盘电极原子发射光谱仪可测量油样中尺寸小于10μm的金属颗粒的元素浓度。铁量仪和发射光谱仪结合可有效监测异常磨损。指出船舶柴油机油样现场监测急须解决的问题是:缺少非铁磁性磨粒总量的快速、有效、可信的检测方法。