Mn在2297铝锂合金中的微合金化作用

利用金相显微镜、拉伸测试、SEM、TEM、STEM-HAADF等手段研究了微量Mn的添加对2297铝锂合金微观组织与力学性能的影响。结果表明,Mn在2297铝锂合金中主要以AlCuMn棒状弥散粒子和Al(CuMnFe)粗大相形式存在,并且相比Mn-free合金,2297合金中粗大相尺寸较小、分布均匀,因而合金的抗拉强度得到提高。研究表明,Mn的添加没有影响Al_3Zr粒子的析出行为,尽管析出了AlCuMn棒状弥散相,但整体上没有改变2297合金的再结晶程度。     

Fe基非晶合金增强1060铝基多层复合材料的组织与性能

采用累积叠轧焊+中间退火法复合轧制1060Al/Fe基非晶多层铝合金复合板材。利用光学显微镜、扫描电镜、X-衍射分析仪以及拉伸试验机分析Al基复合材料的微观组织结构变化、断口形貌、物相组成以及力学性能。结果表明:Fe基非晶复合材料的增强体在300 ℃中间退火过程中发生部分晶化,在累积变形轧制过程中发生破碎,并随着变形道次的增加,破碎程度随之增大;复合板前6道次的累积轧制变形出现了明显的加工软化现象,并且随着变形道次的增加,其加工软化的效果愈明显;随着累积轧制变形道次增加,Al基复合材料的力学性能发生了明显的变化,第2道次轧制变形后屈服强度与抗拉强度达到了最大值为140 MPa和156 MPa,伸长率为5.53%,达到最佳综合性能。     

冷轧变形量及再结晶对TC4合金组织与性能的影响

通过XRD、OM、EDS、SEM和万能试验机等方法,研究了不同冷变形量对TC4合金微观组织及力学性能的影响以及相同再结晶处理对不同冷变形量合金再结晶程度的影响。结果表明,冷轧制使得TC4合金产生加工硬化,相较固溶试样,35%和48%冷变形量试样的抗拉强度分别提高451 MPa和228 MPa。再结晶工艺相同时,随着变形量的增大,合金的抗拉强度逐渐降低。     

冷轧退火对FeMnCoCrAl高熵合金组织和力学性能的影响

使用真空电弧炉熔炼出(Fe₅₀Mn₃₀Co₁₀Cr₁₀)₉₄Al₆合金,利用冷轧及在不同温度对合金进行退火,以期望得到由多尺度再结晶晶粒构成的层状结构;并对不同退火温度的样品进行拉伸性能测试。利用扫描电镜和EBSD对合金组织形貌进行表征,采用X射线衍射方法研究其相组成。结果表明:合金在铸态和冷轧后相组成未发生变化,700 ℃退火得到较好的多尺度再结晶晶粒的层状结构,其屈服强度为487 MPa,抗拉强度为708 MPa,断后伸长率为39%,表现出良好的综合力学性能。     

One‐Step Construction of N,P‐Codoped Porous Carbon Sheets/CoP Hybrids with Enhanced Lithium and Potassium Storage

Despite the desirable advancement in synthesizing transition‐metal phosphides (TMPs)‐based hybrid structures, most methods depend on foreign‐template‐based multistep procedures for tailoring the specific structure. Herein, a self‐template and recrystallization–self‐assembly strategy for the one‐step synthesis of core–shell‐like cobalt phosphide (CoP) nanoparticles embedded into nitrogen and phosphorus codoped porous carbon sheets (CoP?NPPCS), is first proposed. Relying on the unusual coordination ability of melamine with metal ions and the cooperative hydrogen bonding of melamine and phytic acid to form a 2D network, a self‐synthesized single precursor can be attained. Importantly, this approach can be easily expanded to synthesize other TMPs?NPPCS. Due to the unique compositional and structural characteristics, these CoP?NPPCSs manifest outstanding electrochemical performances as anode materials for both lithium‐ and potassium‐ion batteries. The unusual hybrid architecture, the high specific surface area, and porous features make the CoP?NPPCS attractive for other potential applications, such as supercapacitors and electrocatalysis.     

多羟基糖类物质对冷冻虾仁中水的重结晶的改善作用

探讨不同糖类对冻藏温度波动下冷冻虾仁的抗冻保水作用。以南美白对虾为对象,以焦磷酸钠和蒸馏水分别为阳性和阴性对照,在-55℃与-24℃冻藏温度波动条件下,分析低聚木糖、卡拉胶寡糖、海藻糖和海藻胶寡糖对虾仁肌肉品质特性的影响。结果表明,在温度波动条件下冻藏144 d过程中,相比于蒸馏水处理组,低聚木糖、卡拉胶寡糖、海藻糖和海藻胶寡糖显著降低了冷冻虾仁的解冻损失率,其中最低的为卡拉胶寡糖组(8.58%)。且糖处理组有效维持了虾仁肌肉组织的质构特性,弹性和咀嚼性最佳分别为1.42 mm和6.80 mJ。同时,几种糖类物质减缓了重结晶虾仁的肌原纤维蛋白含量(106.10 mg/g～111.67 mg/g)、Ca~(2+)-ATPase活性(0.124 U/mg～0.136 U/mg)和总巯基含量(7.6 mmol/L～8.1 mmol/L)的下降速率。微观结构观察发现,相比于蒸馏水组,糖类处理后的虾仁肌肉结缔组织结构较为完整,肌束间空隙较小,且并未发生大面积扭曲、断裂现象,其对冻藏虾仁组织结构具有较好的维持作用。由上,低聚木糖、卡拉胶寡糖、海藻糖和海藻胶寡糖可作为冷冻虾仁的抗冻保水剂加以开发与利用。     

Particle size reduction of RDX by sequential application of solvent–antisolvent recrystallization and mechanical methods

ABSTRACT

Solvent–antisolvent recrystallization produced ~8 µm average size RDX particles (UF-RDX) that were subsequently subjected to mechanical methods of ultrasonication and ball-milling to find further achievable reduction in particle size. Long duration ultrasonication for 20 h and 300 rpm ball milling for 4 h of UF-RDX decreased its average particle size to ~2 µm. RDX produced by all the three processes (solvent–antisolvent recrystallization, ultrasonication and ball-milling) was similar to coarser RDX in structure and thermal decomposition behavior. However, UF-RDX produced by solvent–antisolvent recrystallization was significantly less impact sensitive than that produced by ball-milling and ultrasonication. The issues of residual solvent and the metal contamination during RDX processing were addressed by process parameter optimization. Solvent–antisolvent recrystallization and mechanical methods even when used sequentially could not bring average particle size of RDX to nano-scale.     

热变形工艺对含硫非调质钢流变应力及组织的影响

在变形温度950~1150 ℃和应变速率0.01~5 s^-1下,通过Gleeble-3500热模拟试验机进行单道次压缩试验,研究了热变形工艺对含硫非调质钢F45MnVS流变应力及组织的影响。结果表明:随着应变速率的增大,热压缩过程中的峰值应力增加,随着温度的升高,峰值应力降低;动态再结晶平均晶粒尺寸随着应变速率、变形量的增加而减小,随着温度的提高而增大。     

Ice Crystal Growth in Sucrose Solutions Containing Kappa- and Iota-Carrageenans

Measurements of ice recrystallization inhibition (IRI) and thermal hysteresis (TH) activities of kappa (κ)- and iota (ι)-carrageenans were carried out to examine whether they can be novel cryoprotectants or not. IRI measurements indicate that both carrageenans reduce recrystallization in sucrose solution, but that the IRI activity of κ-carregeenan is higher than that of ι-carrageenan. TH measurements indicate that κ- and ι-carrageenans do not exhibit TH activity. TH activity measurements of antifreeze glycoprotein (AFGP) in the presence of κ-carregeenan demonstrate that this carregeenan neither influences the TH activity of AFGP nor the shape of the ice crystals. The round ice crystal shape transformed into an angular and elongated shape in the presence of both carregeenans.