Soluble polyimide as liquid crystal perpendicular alignment layer

Journal of Materials Science - Three polyimides (PIs) were prepared from a diamine containing biphenyl ester group as a side chain and a corresponding dianhydride chosen from...     

超临界机组发生FAC的因素及相互关系分析

为了减轻因流动加速腐蚀(FAC)引起的锅炉结垢加速、汽水系统管道厚度减小甚至爆裂现象，对超临界机组发生流动加速腐蚀的机理及其主要影响因素进行了研究，并讨论了管壁内表面粗糙度、蒸汽含汽率、pH值、溶氧量对FAC的影响，以及温度与pH值、温度与流速、pH值与溶解氧量、溶解氧量与氢电导率等影响因素之间的相互作用关系，最后结合实际电厂的运行数据验证了分析结果。研究表明：减小工质流速、管壁粗糙度和氢电导率，增大给水的pH值和溶解氧含量可以使FAC的腐蚀速率减小，超临界加氧处理时pH值应在8.9～9.2之间，溶解氧量范围为45～100μg/L,氢电导率的期望值在0.1μS/cm以下。由于各影响因素之间的作用十分复杂，本文只给出了大致范围和趋势，并未给出准确数据。     

A non-invasive learning branch to capture leaf-image attention for tree species classification

Multimedia Tools and Applications - Tree species classification is a necessary and challenging task for both multimedia technique and forestry engineering. Continuous developments in multimedia and...     

Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

依托"大数据行业应用"虚拟教研室培养跨学科人才

在实施国家大数据战略和创新型国家建设的引导下,培养跨学科思维与能力是创新型人才培养的核心要求.大数据是一个典型的学科交叉的技术,资源分散是当前高校大数据人才培养存在的主要问题.该文以长沙理工大学"大数据行业应用"虚拟教研室建设为例,打造"大数据"特色跨学科跨专业教学组织,从课程体系、实践环节、师资队伍、质量监督等方面提出建设措施,为培养跨学科创新型复合型人才提供参考.     

采用QuEChERS结合UHPLC-MS/MS定量分析热加工肉制品中的三种胺类物质

本文采用QuEChERS技术结合超高效液相色谱-串联质谱（UHPLC-MS/MS）技术建立同时检测丙烯酰胺（AA）、亚硝胺（NAs）和杂环胺（HAAs）含量的方法，用于分析热加工肉制品中产生的胺类物质。结果表明:该方法检测出的三类成分20种胺类物质在相应浓度范围内显示出良好的线性关系（R2>0.991），检测限和定量限分别为0.01~1.6 ng/g和0.03~4.8 ng/g，日内回收率介于66.3%~116.5%之间，日内精密度介于0.78%~9.0%之间。每个胺类物的5×LOQ加标水平计算的日间精度范围为3.4%~9.4%。该方法应用于煎烤的四种肉制品中AA、NAs和HAAs的分析，共检测出9种胺类物质，浓度范围为0.03~31.26 ng/g。     

Method of sensitive data mining based on Pan-Bull algebra

Wireless Networks - In order to improve the transmission stability of sensor networks, a sensitive data mining method based on Pan Boolean algebra is proposed. According to the output correctness,...     

高强化柴油机冷却系统电控化设计仿真及试验研究

针对传统冷却系统与柴油机冷却需求不匹配的问题，进行了冷却系统电控化设计仿真研究。基于Simulink软件设计了电控冷却系统仿真模型，提出了电控冷却控制策略，并开展了变柴油机工况条件下电控冷却控制策略验证仿真。对传统冷却部件进行电控化改造（电控海水泵、电控淡水泵和电子节温器），搭建电控冷却系统试验台架，通过试验分析了电控冷却对柴油机耗油率和热平衡的影响，结果表明：相对于传统冷却系统，电控冷却系统在900 r/min、负荷率30%，1 200 r/min、负荷率60%，1 500 r/min、负荷率90%这3个工况点的耗油率分别降低9.4 g/（kW·h）、6.8 g/（kW·h）和3.9 g/（kW·h），燃油经济性和热量分配得到改善。