The influence of volume fraction of amorphous phase on corrosion resistance of Mg67Zn 29Ca 4 alloy

The aim of this study was to investigate the structure and corrosion resistance of amorphous, amorphous‐crystalline, and crystalline Mg₆₇Zn₂₉Ca₄ alloy for biodegradable applications. This paper presents a preparation method and results of the structural characterization and corrosion resistance analysis of the material. Samples were prepared in the form of 3 mm diameter rods. The structure of the alloy was examined with the use of X‐ray diffractometry and scanning electron microscopy. The thermal properties of the samples were examined with differential scanning calorimetry (DSC). Results of DSC analysis were used to determine heat treatment temperatures, allowing to obtain different fractures of crystalline phase in the material. Corrosion resistance of heat‐treated samples was investigated by immersion tests and electrochemical measurements performed in the simulated body fluid. The X‐ray diffraction results confirmed that the prepared Mg₆₇Zn₂₉Ca₄ alloy's structure is fully amorphous. After heat treatment, samples with different fractions of amorphous phase in the structure were obtained. Immersion tests of the samples showed that the structure significantly influenced corrosion resistance in examined materials. It should be pointed out, that certain amounts of crystalline phase in amorphous matrix can greatly improve the corrosion resistance of Mg₆₇Zn₂₉Ca₄ alloy.     

Transfer learning between crop types for semantic segmentation of crops versus weeds in precision agriculture

Agricultural robots rely on semantic segmentation for distinguishing between crops and weeds to perform selective treatments and increase yield and crop health while reducing the amount of chemicals used. Deep‐learning approaches have recently achieved both excellent classification performance and real‐time execution. However, these techniques also rely on a large amount of training data, requiring a substantial labeling effort, both of which are scarce in precision agriculture. Additional design efforts are required to achieve commercially viable performance levels under varying environmental conditions and crop growth stages. In this paper, we explore the role of knowledge transfer between deep‐learning‐based classifiers for different crop types, with the goal of reducing the retraining time and labeling efforts required for a new crop. We examine the classification performance on three datasets with different crop types and containing a variety of weeds and compare the performance and retraining efforts required when using data labeled at pixel level with partially labeled data obtained through a less time‐consuming procedure of annotating the segmentation output. We show that transfer learning between different crop types is possible and reduces training times for up to 80%. Furthermore, we show that even when the data used for retraining are imperfectly annotated, the classification performance is within 2% of that of networks trained with laboriously annotated pixel‐precision data.     

Bacteriophages vB_Sen-TO17 and vB_Sen-E22, Newly Isolated Viruses from Chicken Feces,Specific for Several Salmonella enterica Strains

Two newly discovered bacteriophages, isolated from chicken feces and infecting Salmonella enterica strains, are described in this report. These phages have been named vB_Sen-TO17 and vB_Sen-E22, and we present their molecular and functional characterization. Both studied viruses are able to infect several S. enterica strains and develop lytically, but their specific host ranges differ significantly. Electron microscopic analyses of virions have been performed, and full genome sequences were determined and characterized, along with molecular phylogenetic studies. Genomes of vB_Sen-TO17 (ds DNA of 41,658 bp) and vB_Sen-E22 (dsDNA of 108,987 bp) are devoid of homologs of any known or putative gene coding for toxins or any other proteins potentially deleterious for eukaryotic cells. Both phages adsorbed efficiently (>95% adsorbed virions) within 10 min at 42 °C (resembling chicken body temperature) on cells of most tested host strains. Kinetics of lytic development of vB_Sen-TO17 and vB_Sen-E22, determined in one-step growth experiments, indicated that development is complete within 30–40 min at 42 °C, whereas burst sizes vary from 9 to 79 progeny phages per cell for vB_Sen-TO17 and from 18 to 64 for vB_Sen-E22, depending on the host strain. Virions of both phages were relatively stable (from several percent to almost 100% survivability) under various conditions, including acidic and alkaline pH values (from 3 to 12), temperatures from −80 °C to 60 °C, 70% ethanol, chloroform, and 10% DMSO. These characteristics of vB_Sen-TO17 and vB_Sen-E22 indicate that these phages might be considered in further studies on phage therapy, particularly in attempts to eliminate S. enterica from chicken intestine.     

Microstructural characterization of plasma sprayed Ln2Zr2O7 thermal barrier coatings by electron microscopy methods

The presented article characterized microstructural aspects of thermal barrier coatings (TBCs) analysis using methods of electron microscopy such as electron backscatter diffraction (EBSD), transmission/scanning electron microscopy (S/TEM), and TEM. The analyzed TBC system is based on gadolinium zirconate deposited by air plasma spraying method, and additionally, it was subjected to an oxidation test for 500 hr at a temperature of 1,100°C. Moreover, the morphological characterization of feedstock powder was showed. EBSD analysis revealed the inhomogeneity of feedstock materials in the form of complex phase composition. In the case of deposited coating, this method was used to characterize the crystallite size of zirconate coating and phase composition of thermally grown oxide zone. S/TEM and TEM analysis showed morphological details of this zone but not revealed such phase as perovskite oxide of GdAlO₃ type.     

Magnetic Resonance Signal Amplification by Reversible Exchange of Selective PyFALGEA Oligopeptide Ligands Towards Epidermal Growth Factor Receptors

The biorelevant PyFALGEA oligopeptide ligand, which is selective towards the epidermal growth factor receptor (EGFR), has been successfully employed as a substrate in magnetic resonance signal amplification by reversible exchange (SABRE) experiments. It is demonstrated that PyFALGEA and the iridium catalyst IMes form a PyFALGEA:IMes molecular complex. The interaction between PyFALGEA:IMes and H₂ results in a ternary SABRE complex. Selective 1D EXSY experiments reveal that this complex is labile, which is an essential condition for successful hyperpolarization by SABRE. Polarization transfer from parahydrogen to PyFALGEA is observed leading to significant enhancement of the ¹H NMR signals of PyFALGEA. Different iridium catalysts and peptides are inspected to discuss the influence of their molecular structures on the efficiency of hyperpolarization. It is observed that PyFALGEA oligopeptide hyperpolarization is more efficient when an iridium catalyst with a sterically less demanding NHC ligand system such as IMesBn is employed. Experiments with shorter analogues of PyFALGEA, that is, PyLGEA and PyEA, show that the bulky phenylalanine from the PyFALGEA oligopeptide causes steric hindrance in the SABRE complex, which hampers hyperpolarization with IMes. Finally, a single-scan ¹H NMR SABRE experiment of PyFALGEA with IMesBn revealed a unique pattern of NMR lines in the hydride region, which can be treated as a fingerprint of this important oligopeptide.     

The use of the internet by older adults in Poland

Universal Access in the Information Society - It is generally accepted that it is young people who are particularly interested in information and communication technologies (ICT). Older adults...     

Participatory design of a robot for demonstrating an epileptic seizure

ABSTRACT

We present the methodology and results of participatory design of a robot for presenting an epileptic seizure and a scenario of the educational workshop using this robot. Children with epilepsy encounter stigma and stereotypes and may receive inadequate aid when having an epileptic seizure. The goal of the larger project was to use the prototype device in a series of workshops for improving teachers' actions during an epileptic seizure and their attitudes towards epileptic students. In this paper, we show how various design goals for an educational robot were accomplished to fit the needs of all identified stakeholders, particularly people with epilepsy.

We used a co-design (participatory design) approach through a series of meetings participated by members of the association Polish Association for People Suffering from Epilepsy, students and faculty members of the biomedical engineering and robotics departments, teachers, psychologists and medical specialists (epileptologist, neurologist).

These meetings created an opportunity for a better understanding of the (functional and nonfunctional) requirements and resulting tradeoffs and led the participants to find appropriate solutions. Participation of people with epilepsy in the design process allowed them to deal with the potentially stereotyped representation of themselves. The prototype robot, therefore, combined goals of various stakeholders, such as an accurate presentation of an epileptic seizure, lightweight, ease of use and control, while preserving the dignity of people with epilepsy.

As a result of the co-designing process, an inexpensive robot was created and used in a series of 10 pilot workshops with 217 participants, mainly teachers of primary and middle schools. Teachers improved their understanding of epilepsy and suggested further improvements to the system.