“是即(则)是P”特征、功能及其演变

从构式语法角度主要对唐宋禅录里的"是即(则)是P"句式进行考察,认为该句式的句式义表示对某种行为事件的保留性肯定,但是还存在某种局限性,具有评判认定、修正补充、主题承接等语用功能。"是即(则)是P"受汉译佛经影响,在唐宋时期的禅籍里产生并常常使用,具有A式和B式两种具体的表达形式,基本语用功能一致。其中A式出现于北宋早期,专用于禅籍文献,是禅家参禅实践活动中一种特殊句式,B式在南宋后来的世俗文献里也常常可见,反映了佛禅文献的传播对近代汉语发展演变的影响。     

基于模糊判别的指纹识别算法探讨

指纹识别在社会各个领域应用都非常广泛.本文从指纹识别的原理和应用出发,介绍一种基于模糊判别的指纹识别算法.     

激光扫描加工图形控制模型的研究

针对激光扫描加工中存在固有图形畸变的情况,提出了DEA(dual-ends approch)控制模型。由于该模型不仅考虑了透镜焦距f、激光入射角θ、振镜偏转角和光学镜组之间的距离,而且还考虑了透镜中心厚度、透镜曲面曲率半径以及透镜介质折射率,因此提高了激光扫描加工系统的加工精度,减小了加工误差。同时利用VC++6.0编制了一个对话框程序,对传统fθ控制模型和DEA控制模型进行了分析比较,结果显示,DEA控制模型能正确表达所设计的加工图形,其精度高于fθ图形控制模型。     

滚动式冷床在高钢级油管生产线中的应用

根据石油开采业对石油机械产品的需求 ,利用机械理论基础知识 ,通过实践设计 ,提出了对几何尺寸长的金属管类进行调质处理后的均匀冷却方法 ,以满足其性能要求。     

A study on the growth curve of and maximum profit from layer-type cockerel chicks

Attacks by adult stages of the soft tick Argas (Argas) neghmei (Acari: Argasidae) on inhabitants of the High Andean plateau of Argentina are reported. This is the first local report of this species, which was previously found in the north of Chile. Taxonomic differences between A. (A.) neghmei and other neotropical and exotic species of the genus are underlined. The status of the knowledge about the Argentine argasid fauna is briefly described.     

水溶性油墨用富马酸改性松香树脂的研制

介绍了一种水溶性富马酸改性松香树脂的制备方法 ,选取了较佳的工艺条件 ,本产品经国内几家油墨厂使用 ,结果表明适合水溶性油墨的应用要求     

MON--未来城域网的发展方向

阐述了城域光网络(MON)技术的出现背景、定义、技术方案和特点，以及与现有城域基础设施的比较，突出说明了其应用上的竞争优势。最后介绍了MON的现状和前景展望。     

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统简介

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统是加拿大GEO-X公司在2002年下半年推出的全新小型便携式地震数据采集系统。该仪器运用了当今最先进的计算机制造技术、网络化技术和微电子技术,除继承了ARAM-ARIES地震数据采集系统所有功能和技术外,它还简化了硬件结构,使体积更小,重量更轻,功能性更强。更加适应地矿、煤田、丛林和山区进行地震勘探。     

N,N''-取代邻苯二胺的合成

通过2-取代苯并咪唑盐的还原开环反应制备了8个N,N′-不同取代的邻苯二胺,并经1HNMR、IR、MS及元素分析表征,其中5个未见文献报道.这是一条由邻苯二胺和羧酸经2.取代苯并咪唑制取该类化合物的简洁合成路线.     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry