Thermoelastic evaluation of composite laminates using digital imaging processing

The study of the variation of the curvature of non-symmetric composite laminates with temperature provides a measure of the magnitude of the thermal stresses and the mechanical behavior of the material with temperature. In the present work, an experimental method based on the pioneer use of a digital camera and image processing method is proposed to perform such measurements. Taking advantage of the method and by comparing experimental and CLT, extended-CLT and FEM simulation results, an evaluation of the residual stresses is described and an approach providing more precise determination of the residual thermal stresses in non-symmetric laminates is proposed.     

强腐蚀环境下锚索强度指标及表观特性试验研究

利用自行制做的试验装置,以配制出的强腐蚀环境土为介质,对非预应力锚索和预应力锚索的裸筋以及对有注浆缺陷的锚索试件进行了腐蚀试验,从外观腐蚀状况和腐蚀后的钢绞线力学性能的改变特性进行了研究.结果表明:从外观上看,预应力锚索试件的腐蚀程度总体上比非预应力试件的腐蚀程度要重,含注浆缺陷的锚索试件的腐蚀程度比裸筋的腐蚀程度要重...     

Computational simulation of Belousov–Zhabotinskii oscillating chemical reaction

The suitability of computational simulation of the Belousov–Zhabotinskii oscillating chemical reaction by differential kinetic methodology for resolving nonlinear multi-component system is demonstrated in this work. According to the Field–KÖrÖs–Noyes mechanism and the Oregonator model, the change of the concentrations of HBrO₂, bromide ion and cerium ion are simulated. The results of computational simulation are consistent with experimental results very well. At the same time, the effect of variables and parameters, especially the rate constant on the oscillation curve, are investigated deeply. A simple method of estimating rate constants is obtained through simulation the concentrations of key components of the system, and then comparison the simulation results with the experimental ones. The reasonable rate constant is also proposed.     

经典传说的新语境分析:以牛郎织女传说为例

牛郎织女传说作为我国四大传说之一,在历史传承中发生了文化变迁,其影响日益式微。在当代语境下,后现代主义思潮的推动,新科技手段的应用,为牛郎织女传说的传承提供了新的机遇。本文拟就对牛郎织女历史语境及当代语境作出分析,同时对牛郎织女未来保护与传承进行构想与展望,思考牛郎织女传说的发展辙迹。     

胶黏钢-混凝土组合梁的界面行为数值分析

根据推出的试验测试数据,将黏胶/混凝土界面的剪切-滑移行为用具备损伤本构关系的弹簧单元来模拟,建立胶黏钢-混凝土组合梁的三维非线性有限元模型.基于模拟结果,揭示了组合梁黏胶/混凝土界面的黏结应力分布规律及脱胶剥离过程.分析结果表明:弹性模量小的黏胶剂更有利于界面的剪力均匀传递,但会引起混凝土板和钢梁间产生大的相对滑动,导致结构整体承载力降低.胶黏组合梁的界面脱胶剥离是一个突发的典型脆性破坏过程,会产生灾难性后果,在设计过程中需引起足够重视.     

Effect of synthesis temperature on density and microstructure of MgB2 superconductor at ambient pressure

The experimental thermodynamic of MgB₂ synthesis process and phase compositions have been investigated by diffraction thermal analysis (DTA) technology and X-ray diffraction. The fabrication of MgB₂ bulks and superconducting properties at the temperatures range from 600 to 800°C were reported. And microstructure of MgB₂ bulks were observed by scanning electron microscope (SEM). A method was developed to determine the porosity of MgB₂ and the highest density can be obtained in MgB₂ prepared at 650°C at ambient pressure. It is found that the vapor pressure of Mg increases remarkably at high temperature, leading to the high porosity in MgB₂ samples. MgB₂ bulk with good superconducting property and fine microstructure was synthesized at 750°C.     

The influence of temperature, pressure, salinity and capillary force on the formation of methane hydrate

We present here a thermodynamic model for predicting multi-phase equilibrium of methane hydrate liquid and vapor phases under conditions of different temperature, pressure, salinity and pore sizes. The model is based on the 1959 van der Waals-Platteeuw model, angle-dependent ab initio inter- molecular potentials, the DMW-92 equation of state and Pitzer theory. Comparison with all available experimental data shows that this model can accurately predict the effects of temperature, pressure, salinity and capillary radius on the formation and dissociation of methane hydrate. Online calculations of the p-T conditions for the formation of methane hydrate at given salinities and pore sizes of sediments are available on: www.geochem-model.org/models.htm.