Impact of Aspen Log Storage with and without Protection on OSB Performance

Outdoor log storage without protection can change the mechanical and chemical properties of wood due to infection by various fungi. To understand how outdoor log storage affects the wood and, subsequently, the strandboard quality, two piles of aspen logs were set up outside and stored for a period of four months (July to November). One of the piles was treated with a biological solution to prevent fungal growth. The other one was stored without treatment. Both piles contained non-debarked and partially debarked logs. Evaluation of sap stain development indicated that all logs had been colonized by staining fungi with average stain coverage of 9.37 to 57.18% and maximum stain penetration of 3.58 to 7.27 cm over the log cross section. The variation of fungal colonization depended on log treatment and bark condition. The most effective way to prevent stain growth was the combination of biological treatment and partial debarking. A series of strandboard was prepared from fresh and aged aspen logs. All boards made from stored logs were statistically comparable to or superior to the control boards made from fresh aspen logs. The boards made from treated/partially debarked and untreated/non-debarked logs were statistically comparable to each other except for wet MOR. In addition, these two board types were statistically stronger than other boards made from treated/non-debarked and untreated/partially debarked logs in terms of IB and water resistance. Some individual stained strands were observed on the finished board surface. Less staining was found in the boards prepared from biologically treated and partially debarked logs, compared with those made from other stored logs.     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

基于像素拓展的图形分割与合成的方法研究

提出了一种新的图像分割与合成方法。对于图像的分割,提出了新的分割算法,先是手工将一些明显属于物体和明显属于背景的像素分割出来,然后创建一个小矩形区域进行像素拓展迭代,迭代到图像边界为止。对于图像的合成,采用平均法,设计了新的算法,使物体的基本颜色保持不变的同时,降低了合成图像中从源图像分割的物体与新背景的差异,并使得其饱和度、色度、强度更加自然真实。     

Facile synthesis of nitrogen and oxygen co-doped hierarchical porous carbon materials for high performance super capacitors

Journal of Porous Materials - Nitrogen and oxygen co-doped hierarchical porous carbons (NOPCs) is prepared by the pyrolysis of polyethylene glycol-200 (PEG) and triazine carbon forming agent (CFA)...     

动力学控制结晶法拆分1,1''''-联二萘酚工艺研究

对外消旋1,1'-联二萘酚(BINOL)的拆分进行了研究.采用动力学控制结晶的方法改进了(S)-2-吡咯烷酮-5-羧酰苯胺拆分BINOL的工艺,得到一种实用有效的获得光学纯BINOL的方法.采用该方法可以同时得到BINOL的R和S两种异构体,它们的ee值均大于99%.采用正交实验的方法研究了反应时间、拆分剂用量、溶剂组成以及溶剂体积在拆分过程中对(R)和(S)-BINOL的产率的影响.在最佳条件下,(R)-BINOL和(S)-BINOL的收率分别为18.0%和35.2%,外消旋BINOL的回收率为58.8%,拆分剂的回收率为68.6%.     

电气绝缘材料的性能与发展

本文介绍了常用的固体绝缘材料的性能与作用，阐述固体绝缘材料的发展趋势。     

丙烯酰胺与2-丙烯酰胺基-2-甲基丙磺酸反相乳液聚合的研究

采用Span-80为乳化剂，白油为分散介质，（NH4）2S2O8-Na2SO3为引发剂，研究了丙烯酰胺（AM）与2-丙烯酰胺基-2-甲基丙磺酸（AMPS）的反相乳液共聚反应，合成出了高相对分子质量的共聚物。讨论了引发剂用量、乳化剂用量、水油比、单体浓度等因素对共聚物相对分子质量的影响。引发剂用量为单体质量的0．2‰，乳化剂为油相的6．7％，水油比为1：1．5，单体浓度为37．5％时可获得高相对分子质量的共聚物，且聚合反应平稳易控制。     

Preparation of HDPE/SEBS‐g‐MAH and its effect on mechanical properties of HDPE/wood flour composites

In this article, high density polyethylene/styrene‐ethylene‐butylene‐styrene block copolymer blends (HDPE/SEBS) grafted by maleic anhydride (HDPE/SEBS‐g‐MAH), which is an effective compatibilizer for HDPE/wood flour composites was prepared by means of torque rheometer with different contents of maleic anhydride (MAH). The experimental results indicated that MAH indeed grafted on HDPE/SEBS by FTIR analysis and the torque increased with increasing the content of maleic anhydride and dicumyl peroxide (DCP). Styrene may increase the graft reaction rate of MAH and HDPE/SEBS. When HDPE/SEBS MAH was added to HDPE/wood flour composites, tensile strength and flexural strength of composites can reach 25.9 and 34.8 MPa in comparison of 16.5 and 23.8 MPa (without HDPE/SEBS‐g‐MAH), increasing by 157 and 146%, respectively. Due to incorporation of thermoplastic elastomer in HDPE/SEBS‐g‐MAH, the Notched Izod impact strength reached 5.08 kJ m^?2, increasing by 145% in comparison of system without compatibilizer. That HDPE/SEBS‐g‐MAH improved the compatibility was also conformed by dynamic mechanical measurement. Scanning electron micrographs provided evidence for strong adhesion between wood flour and HDPE matrix with addition of HDPE/SEBS‐g‐MAH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

二氢叶酸还原酶抑制剂的量子化学研究——吡啶并嘧啶类衍生物的定量构效关系

利用量子化学方法,将二氢叶酸还原酶抑制剂--吡啶并嘧啶类衍生物的电子结构进行了计算分析和线性的拟合.结果表明化合物的5位取代基的体积,最低空轨道的能级,分子偶极矩,能级差有着显著的相关性.回归分析得到了相关性好的相关模型（R=0.93）.     

A general method for modified function projective synchronization

This paper investigates the modified function projective synchronization,which means that the drive system and the response system are synchronized up to a desired scale matrix of function. By the active control scheme,a general method for modified function projective synchronization is proposed. Numerical simulations on chaotic Rssler system and hyper-chaotic Chen system are presented to verify the effectiveness of the proposed scheme.