高光谱成像用高帧频CMOS图像传感器北大核心

针对高帧频、全局曝光和光谱平坦等成像应用需求,设计了一款高光谱成像用CMOS图像传感器。其光敏元采用PN型光电二极管,读出电路采用5T像素结构。采用列读出电路以及高速多通道模拟信号并行读出的设计方案来获得低像素固定图像噪声(FPN)和非均匀性抑制。芯片采用ASMC 0.35μm三层金属两层多晶硅标准CMOS工艺流片,为了抑制光电二极管的光谱干涉效应,后续进行了光谱平坦化VAE特殊工艺,并对器件的光电性能进行了测试评估。电路测试结果符合理论设计预期,成像效果良好,像素具备积分可调和全局快门功能,最终实现的像素规模为512×256,像元尺寸为30μm×30μm,最大满阱电子为400 ke^(-),FPN小于0.2%,动态范围为72 dB,帧频为450 f/s,相邻10 nm波段范围内量子效率相差小于10%,可满足高光谱成像系统对CMOS成像器件的要求。     

基于近红外光谱法快速鉴别转基因油研究

采用近红外光谱法对转基因油/非转基因油的混合溶液进行研究。对采集到的原始光谱分别进行多元散射校正（MSC）、一阶导数（FD）、移动窗口平滑（MWS）、Savitzky-Golay平滑一阶导数（SG1）预处理。研究比较了不同预处理方法对转基因油/非转基因油支持向量机（SVM）建模判别分析的影响，其中MSC预处理后的模型预测效果最好，准确率为91.6%。为了进一步提高模型的精度与稳定性，采用连续投影算法（SPA）对全波长进行特征波长筛选。利用筛选后的15个特征波长输入到SVM中，预测准确率提高到98.3%。实验结果表明，采用近红外光谱法，可以实现对转基因油/非转基因油快速检测，不仅适用于纯转基因油的鉴别，也适用于非转基因油中掺入转基因油的鉴别。     

A multi-start central force optimization for global optimization

Central force optimization (CFO) is an efficient and powerful population-based intelligence algorithm for optimization problems. CFO is deterministic in nature, unlike the most widely used metaheuristics. CFO, however, is not completely free from the problems of premature convergence. One way to overcome local optimality is to utilize the multi-start strategy. By combining the respective advantages of CFO and the multi-start strategy, a multi-start central force optimization (MCFO) algorithm is proposed in this paper. The performance of the MCFO approach is evaluated on a comprehensive set of benchmark functions. The experimental results demonstrate that MCFO not only saves the computational cost, but also performs better than some state-of-the-art CFO algorithms. MCFO is also compared with representative evolutionary algorithms. The results show that MCFO is highly competitive, achieving promising performance.     

Generating synthetic benchmark circuits for accelerated life testing of field programmable gate arrays using genetic algorithm and particle swarm optimization

Accelerated life testing (ALT) of a field programmable gate array (FPGA) requires it to be configured with a circuit that satisfies multiple criteria. Hand-crafting such a circuit is a herculean task as many components of the criteria are orthogonal to each other demanding a complex multivariate optimization. This paper presents an evolutionary algorithm aided by particle swarm optimization methodology to generate synthetic benchmark circuits (SBC) that can be used for ALT of FPGAs. The proposed algorithm was used to generate a SBC for ALT of a commercial FPGA. The generated SBC when compared with a hand-crafted one, demonstrated to be more suitable for ALT, measured in terms of meeting the multiple criteria. The SBC generated by the proposed technique utilizes 8.37% more resources; operates at a maximum frequency which is 40% higher; and has 7.75% higher switching activity than the hand-crafted one reported in the literature. The hand-crafted circuit is very specific to the particular device of that family of FPGAs, whereas the proposed algorithm is device-independent. In addition, it took several man months to hand-craft the SBC, whereas the proposed algorithm took less than half-a-day.     

不同工质回路热管负载功率变化下的质量流量特性

为了进一步提高回路热管仿真精度并丰富回路热管实验研究方法，本文对回路热管瞬态传质进行实验研究。使用高精度质量流量计分别对以丙酮、乙醇、丙烯为工质的回路热管进行不同负载功率下的质量流量测量研究。结果表明：启动阶段，热负载10W时，丙烯回路比丙酮回路热管启动快，且两者的温度稳定均滞后于质量流量；稳定阶段，随着热负载功率增大，不同工质的回路热管的平均质量流量均线性增长，而瞬态质量流量则持续波动，其质量流量波动幅度均呈现先减小后增大的趋势。质量流量波动幅度会受到气体工质的可压缩性与作用在毛细芯内部上的热量的共同影响。通过频谱分析发现，液相质量流量波动还会受到冷凝器两相区的影响。高热负载下，作用在毛细芯内部上的热量占主导地位，质量流量波动加剧，同时出现周期性大幅波动，且其波动频率随着热负载增大而增大。     

The investigation of gold/zirconia as a photocatalyst for the direct synthesis of imines from alcohols and aniline

Au/ZrO₂ nanoparticles have been widely used as photocatalysts in various organic syntheses because of their localized surface plasmon resonance (LSPR) effects. In our work, Au/ZrO₂ has been synthesized by a solution method and it was used as a heterogeneous catalyst in the synthesis of imines from alcohols and aniline with irradiation by visible light. The reaction occurred in two steps: step 1 was the aerobic oxidation of the alcohols and step 2 was the nucleophilic addition of aniline. Dimethyl sulfoxide (DMSO) was used as a solvent in the reaction. The selectivity in the synthesis of imines over 3 wt% Au/ZrO₂ (with mean particle size of 5 nm) was high (over 90%) with irradiation by visible light at room temperature, and an obvious difference in the conversion was observed between the reactions with light irradiation and those without light. The intensity and wavelength of the light strongly affected the reaction. The Au/ZrO₂ could be used at least 5 times. A reaction mechanism was proposed based on the experimental results. The results indicate that the reaction of alcohols and aniline using Au/ZrO₂ as the photocatalyst can proceed under mild conditions. Furthermore, this process is environmentally friendly and green.     

4 K节流制冷机预冷温度及压力特性影响研究

空间4 K JT节流制冷是实现深空探测任务的关键技术之一。基于4 K温区开式节流制冷机实验台，理论分析末级预冷温度及高压压力对理论最大制冷量的影响，给出不同工况下最优末级预冷温度及最优高压压力的选择。开展实验测试验证理论计算。分别测试了末级预冷温度为15 K时，五种高压压力（0.829、1.103、1.775、1.837和2.154 MPa）以及高压压力1.773 MPa时三种不同预冷温度（11.5、15.0和18.0 K）下的最大制冷性能，实验结果变化趋势与理论值吻合较好。预冷温度及压力特性影响研究为后续节流系统整体压缩机及预冷机最优状态耦合匹配奠定基础。     

Acoustic power measurement of linear compressors

The linear compressor works as an important driver for high frequency regenerative cryocoolers. The acoustic power output of the compressor is a critical parameter in the design and the optimization of a linear compressor. To measure this parameter, several approaches based on different theories have been developed. In this paper, the RC load approach and the back chamber approach have been applied to a linear compressor to measure the acoustic power output. The results measured by the approaches indicate a good consistency with the theoretical calculation and reveal the connections between different approaches.The difference between the acoustic power at the piston surface and the exit of a linear compressor has been analyzed based on the experimental results from the RC load approach and the back chamber approach. The volume flow rate difference which accounts for the acoustic power difference is studied theoretically. Furthermore, based on the RC load approach, the optimum impedance together with the impedance cloudy map for the linear compressor to reach its highest efficiency has been obtained by analyzing the experimental and the theoretical results.     

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

A Stirling/pulse tube hybrid cryocooler (SPC), comprised of a Stirling cryocooler as the first stage and a pulse tube cryocooler as the second stage, features the ability of shifting cooling capacity between stages by adjusting the movement of the displacer in the first stage. Such an ability allows an SPC to accommodate itself to time-varying heat loads at different temperatures, which makes it a competitive candidate in space applications. However, due to the gas coupling, there exists a significant mutual effect between stages which endows an SPC with special thermodynamic characteristics and has a significant effect on the SPC’s capability of shifting cooling capacity between stages. With the phasor analysis and the thermodynamic analysis, this paper establishes an idealized model of an SPC. The model is then used to study the effect of the second stage on the first stage and reveal the condition that an SPC is able to shift cooling capacity between stages. Also, the model is compared with a Sage numerical model and the two models are consistent on the overall trend. Though it is unable to reflect reality precisely, the idealized model can interpret the mechanism and highlight some of the essential nature of an SPC, which will eventually benefit the appropriate design of an SPC.     

Enhanced bioactivity of Zanthoxylum schinifolium fermented extract: Anti-inflammatory,anti-bacterial,and anti-melanogenic activity

1. Download : Download high-res image (151KB)
2. Download : Download full-size image