High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

Effect of chemical phosphorylation on solubility of buffalo milk proteins

Buffalo milk proteins (casein, co-precipitate or whey protein concentrate) were phosphorylated with phosphorus oxychloride (POCl₃) at three different pH values (5.0, 7.0 and 9.0). The solubilities of phosphorylated milk proteins were examined over the pH range 3.0–9.0 in water and ionic (0.1 m NaCl or 10–70 mm Ca²⁺) systems. The solubilities of buffalo milk proteins decreased at pH 3.0, while there was an increase in the solubilities of casein and co-precipitate near their isoelectric points upon phosphorylation. Solubilities of these phosphorylated milk proteins were pH dependent in 0.1 m NaCl but there was a decrease in their solubilities with increase in calcium ion concentration. This alteration could be due to the shifting of isoionic points of phosphorylated buffalo milk proteins towards acidic pH.     

OPAH a model for optimal design of multipurpose small hydropower plants

The investment in small hydropower plants requires the analysis of hydrological, technical, operational, budgetary, economical and financial aspects. The analysis of each possible configuration demands the joint action of several technicians, consuming substantial time and money. During initial design of the project, simplified procedures are usually adopted which may compromise the quality of the base configuration.In this paper we will present a global overview of the OPAH model, which was developed to surpass these limitations. This global model performs the optimization of project configuration. This model uses non-linear programming optimization to analyze the multipurpose operation of the hydropower plant. It uses a numeric simulation model of unsteady flow under pressure to analyze the hydraulic circuit. It uses an economical and financial simulation model that takes in to account the project risk associated to hydrologic and market variability, the financial capacity of the investor and the fiscal aspects.     

Real faces and robot faces: The effects of representation on computer-mediated communication

While there is much research regarding audio, video and text based communication, there has been little work concerning how users communicate via avatars—that is graphical embodiments of remote users. The aim of this study was to explore the effects of different forms of representation, by examining how users communicate via high quality video images and basic graphical representations in different communicative contexts. Communication analysis revealed that video images facilitate turn-taking, although they are not necessarily perceived very differently from basic avatars in terms of questionnaire responses. Using eye-tracking techniques, we found that while participants generally gaze more often at video images, this is dependent on the communicative context and is not necessarily an advantage in a problem-solving situation. This study has demonstrated the value of employing various measures and tasks in order to evaluate computer-mediated interactions. The results have implications for the use of video and graphical representations in computer mediated communication and suggest that the benefits of video must be considered in relation to the user's requirements (e.g. communication process versus outcome) and context in which the system is to be applied (e.g. problem-solving or social).     

Ion-beam-defect processes in group-III nitrides and ZnO

Recently, there has been much interest in wide band-gap wurtzite semiconductors such as group-III nitrides (GaN, AlGaN, and InGaN) and ZnO. Ion-beam-defect processes are considerably more complex in these wurtzite semiconductors than in the case of both elemental and group-III-V cubic semiconductors. This brief review focuses on our recent studies of the following aspects of ion-beam-defect processes: (i) effects of implanted species and the density of collision cascades, (ii) the nature of ion-beam-produced planar defects in GaN, (iii) defect production in GaN by swift heavy ions, (iv) blistering of H-implanted GaN, (v) electrical isolation of GaN and ZnO, (vi) the effect of Al and In content on defect processes in III-nitrides, and (vii) structural damage in ZnO with an intriguing effect of the formation of an anomalous defect peak. Emphasis is given to unusual ion-beam-defect processes and to the physical mechanisms underlying them.     

Simple concepts for ion source improvement

We report on improvements in the overall intensity of a sputter ion source that evolved originally from an NEC MCSNICS. Beam output increases benefit both AMS measurements and nuclear physics experiments using low natural abundance beams. In particular, minor changes in source geometry suggested by a combination of electrostatic calculations and simple design principles have yielded increases in extracted negative ion intensity of nearly a factor of 4.     

Electrical properties of dysprosium phthalocyanine films

Forty-four nanometers thick films of alkyl-substituted dysprosium phthalocyanine molecules were prepared on carefully cleaned indium tin oxide (ITO) substrates by the spin casting method. UV–vis absorption spectra and dc conduction characteristics were obtained in order to investigate the structure–conduction property relationship. The conduction is Ohmic at low applied voltages but the space charge limited mechanism is prevalent at relatively high voltages. The conductivities of both as-deposited and heat treated films are found to show directionally anisotropic behaviour. The columnar conductivity was found to be significantly large in the liquid crystalline state.     

The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars

Mortar serves as the basis for the workability properties of self-compacting concrete (SCC) and these properties could be assessed by self-compacting mortars (SCM). In fact, assessing the properties of SCM is an integral part of SCC design. The objective of this study was to evaluate the effectiveness of various mineral additives and chemical admixtures in producing SCMs. For this purpose, four mineral additives (fly ash, brick powder, limestone powder, and kaolinite), three superplasticizers (SP), and two viscosity modifying admixtures (VMA) were used. Within the scope of the experimental program, 43 mixtures of SCM were prepared keeping the amount of mixing water and total powder content (portland cement and mineral additives) constant. Workability of the fresh mortar was determined using mini V-funnel and mini slump flow tests. The setting time of the mortars, were also determined. The hardened properties that were determined included ultrasonic pulse velocity and strength determined at 28 and 56 days. It was concluded that among the mineral additives used, fly ash and limestone powder significantly increased the workability of SCMs. On the other hand, especially fly ash significantly increased the setting time of the mortars, which can, however, be eliminated through the use of ternary mixtures, such as mixing fly ash with limestone powder. The two polycarboxyl based SPs yield approximately the same workability and the melamine formaldehyde based SP was not as effective as the other two.     

Occurrence of aflatoxin M1 in pasteurised,UHT milk and milk powder from goat origin

In the present study, 36 samples of pasteurised, ultra-high-temperature (UHT) treated and goat milk powder traded in the city of Campinas, Brazil, were analysed for aflatoxin M₁ (AFM₁), from October to December 2004 and March to May 2005. Results showed 25 (69.4%) positive samples for AFM₁ at levels of 0.011–0.161 μg L⁻¹ of milk, which were below the tolerance limit of 0.500 μg L⁻¹ as adopted for AFM₁ in milk by Brazilian regulations. Mean levels of AFM₁ in pasteurised, UHT and goat milk powder were 0.072 ± 0.048, 0.058 ± 0.044 and 0.056 ± 0.031 μg L⁻¹, respectively. It is concluded that the incidence of AFM₁ in goat milk traded in Campinas is high, but at levels that probably leads to a non-significant human exposure to AFM₁ by consumption of goat milks.     

Effect of cerium on the growth and crystalline quality of KDP crystals

The effect of the addition of cerium in potassium dihydrogen phosphate, grown from aqueous solution by the temperature lowering method using bi-direction seed rotation technique has been studied. The optimal addition of trivalent cerium ions considerably prevents other bivalent transition metal ions (Co, Ni, Mn) from entering into the crystal lattice and results in reduced defects and dislocations. A simple microcontroller based bi-directional accelerated seed rotation control setup is designed and employed to avoid stagnant regions or re-circulating flows in the solution. High-resolution XRD analysis of the (002) plane reveals that the Ce³⁺ added KDP exhibited better crystalline perfection and contains less dislocation.