PAM-粉煤灰体系在煤泥水絮凝沉降过程中的作用及机理

以煤泥水COD、SS、动电位、污泥比阻为切入点,分析了煤泥水的特点及难以絮凝沉降的原因,并研究了PAM-粉煤灰体系在混凝沉降作用中的机理。研究结果表明:PAM-粉煤灰法在最优条件下,清水分离率47%、沉降速度0.357 mm/s;上清液:pH=7.35,SS=55.57 mg/L,COD=37.72 mg/L;污泥比阻为0.062×10^15 m/kg,满足煤泥水循环标准。     

含L-精氨酸和抗氧化物质组方的毒理学安全性研究

为探究含L-精氨酸和抗氧化物质组方的毒理学安全性,该文按照《保健食品检验与评价技术规范》(2003年版)重点开展了含L-精氨酸、山楂提取物、知母提取物和虾青素组方的毒理学评价。毒理实验显示,该组方小鼠经口急性毒性试验中最大耐受剂量值(maximum tolerance dose,MTD)>20.0 g/(kg·BW),Ames试验、小鼠骨髓微核试验和小鼠精子畸形试验均未见该组方样品有致突变作用。大鼠30 d喂养试验各项指标也均未见明显毒性反应。该组方属于无毒级、无遗传毒性,不会引起突变,为其临床应用及保健食品研发提供毒理学方面的科学依据。     

功能性海带面包生产工艺的研究

该研究将海带进行处理后添加到面包中,通过对生产工艺进行研究,以期得到功能性的海带面包。以面包感官评价得分为考察指标,考察高压蒸煮温度、蒸煮时间、海带粒径3个因素对面包品质的影响,确定海带最佳预处理工艺条件为:高压蒸煮温度125℃、蒸煮时间20 min、海带粉碎粒度40目<φ<60目;采用正交试验分析法,确定海带面包的最佳生产配方为:食盐添加量为1.5%、海带粉添加量为8%、酵母添加量为2.0%、改良剂添加量为0.8%。此条件下,海带面包的体积膨松,组织气孔细密,口感柔软,具有海带清香味。     

Olfactory responses of Stegobium paniceum to different Chinese medicinal plant materials and component analysis of volatiles

Stegobium paniceum (L.) (Coleoptera: Anobiidae) is among the major pests of stored products, causing great damage to stored Chinese medicinal plant materials (CMPMs) in China. Effective control strategies are urgently needed. The aim of this study was to explore the role of volatile organic compounds in the host preference of S. paniceum. First, the olfactory behavioral responses of S. paniceum adults to volatiles from four CMPMs (Panax notoginseng, Angelica sinensis, Gastrodia elata, and Peucedanum praeruptorum) were tested in Y-tube olfactometer experiments. Then, the volatile composition of these plant materials were analyzed by gas chromatography-mass spectrometry (GC-MS). S. paniceum showed significant preferences for volatiles from the four CMPMs, compared with clean air (CA). When S. paniceum was presented with choices among different CMPMs, it showed the strongest preference for P. notoginseng, followed by A. sinensis, then G. elata, and P. praeruptorum. GC-MS analysis identified 43, 34, 28 and 60 components in the volatile profiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. Falcarinol (14.4%), 3-n-butyl phthalide (78.7%), p-cresol (40.1%), and β-pinene (29.1%) were the most abundant components of the volatiles of P. notoginseng, A. sinensis, G. elata, and P. praeruptorum, respectively. The olfactory responses of S. paniceum to the four CMPMs demonstrated that host-related volatiles play an important role in the host-searching process by adult beetles. This information will be useful for the development of safe and effective trapping strategies for this pest.     

抽水蓄能电站施工现场安全文明施工三维策划应用研究

基于电网安全对稳定经济运行的重要作用,国家大力推进抽水蓄能电站的建设,"十三五"期间,将进入抽水蓄能电站建设高峰期,抽水蓄能电站施工现场点多面广,基建安全形势严峻,施工现场的安全是工程管理的核心因素[1].为了提升现场安全文明施工管理水平,其核心在于施工现场安全文明施工策划,策划的水平和可操作性决定了建筑施工过程中的安全管理的成效,而行之有效的策划应用模式成为关键.本文结合山东文登抽水蓄能电站安全文明施工三维策划管理及三维策划系统应用,解决了现有安全文明施工策划、现场安全布置、安全设施标准化等环节的局限性及不足,实现了策划的高效快捷、效果直观真切,探索出了安全文明施工策划应用的新途径.     

Microstructure characterization of W-Ni-Fe heavy alloys with optimized metallographic preparation method

Tungsten heavy alloys (WHA) have been widely adopted in many engineering applications due to their excellent physicochemical properties. Microstructure characterization is a very powerful method ranging from testing materials properties to detecting material failures and defects. However, the microstructure of WHA was not well characterized with the sample prepared by conventional method of etching with strong acids, bases or oxidant after polishing for the coarse surface. To solve the problem, the exact characterization of W-Ni-Fe heavy alloys microstructure was conducted using the sample prepared by optimized polishing method. A series of experiments were conducted to find the suitable polishing conditions including polishing pad, abrasive slurry and slurry pH. The results show that a smooth and clear microstructure sample was obtained by polishing with alkaline colloidal silica and IC polishing pad, which contained few defects compared with that obtained by conventional method of etching after polishing. The microstructure of W-Ni-Fe heavy alloys was analyzed by XRD, EDS tests and EPMA detection. The slipping phenomenon was observed in nanoindentation test using the prepared sample for the first time and the mechanism of satisfactory microstructure sample preparation was illustrated.     

Viscoplastic behavior of AA7075 aluminum alloy at high strain rate

Journal of Mechanical Science and Technology - The flow stress increases with the increase in strain rate. This phenomenon is the strain rate effect of plastic deformation. Hopkinson experiment...     

Design and optimization of the magnetic adsorption mechanism of a pipeline-climbing robot

Journal of Mechanical Science and Technology - This study has designed a type of pipeline-climbing robot to solve the problem in which the corrosion of offshore oil pipelines and the adhesion of...     

NBTI alleviation on FinFET-made GPUs by utilizing device heterogeneity

Recent experimental studies reveal that FinFET devices commercialized in recent years tend to suffer from more severe NBTI degradation compared to planar transistors, necessitating effective techniques on processors built with FinFET for endurable operations. We propose to address this problem by exploiting the device heterogeneity and leveraging the slower NBTI aging rate manifested on the planar devices. We focus on modern graphics processing units in this study due to their wide usage in the current community. We validate the effectiveness of the technique by applying it to the warp scheduler and L2 cache, and demonstrate that NBTI degradation is considerably alleviated with slight performance overhead.