Prediction of pullout interaction coefficient of geogrids by extreme gradient boosting model

Geogrids embedded in fill materials are checked against pullout failure through standard pullout testing methodology. The test determines the pullout interaction coefficient which is critical in fixing the embedment length of geogrids in mechanically stabilized earth walls. This paper proposes prediction of pullout interaction coefficient using data driven machine learning regression algorithms. The study primarily focusses on using extreme gradient boosting (XGBoost) method for prediction. A data set containing 220 test results from the literature has been used for training and testing. Predicted results of XGBoost have been compared with the results of random forest (RF) ensemble learning based algorithm. The predictions of XGBoost model indicates 85% accuracy and that of RF model shows 77% accuracy, indicating significantly superior and robust prediction through XGBoost above RF model. The importance analysis indicates that normal stress is the most significant factor that influences the pullout interaction coefficients. Subsequently pullout tests have been performed on geogrid embedded in four different fill materials at three normal stresses. The proposed XGBoost model gives 90% accuracy in prediction of pullout interaction coefficient compared to laboratory test results. Finally, an open-source graphical user interface based on the XGBoost model has been created for preliminary estimation of the pullout interaction coefficient of geogrid at different test conditions.     

Predicting the mechanical properties of Cu–Al2O3 nanocomposites using machine learning and finite element simulation of indentation experiments

Micromechanics model, finite element (FE) simulation of microindentation and machine learning were deployed to predict the mechanical properties of Cu–Al₂O₃ nanocomposites. The micromechanical model was developed based on the rule of mixture and grain and grain boundary sizes evolution to predict the elastic modulus of the produced nanocomposites. Then, a FE model was developed to simulate the microindentation test. The input for the FE model was the elastic modulus that was computed using the micromechanics model and wide range of yield and tangent stresses values. Finally, the output load-displacement response from the FE model, the elastic modulus, the yield and tangent strengths used for the FE simulations, and the residual indentation depth were used to train the machine learning model (Random vector functional link network) for the prediction of the yield and tangent stresses of the produced nanocomposites. Cu–Al₂O₃ nanocomposites with different Al₂O₃ concentration were manufactured using insitu chemical method to validate the proposed model. After training the model, the microindentation experimental load-displacement curve for Cu–Al₂O₃ nanocomposites was fed to the machine learning model and the mechanical properties were obtained. The obtained mechanical properties were in very good agreement with the experimental ones achieving 0.99 coefficient of determination R2 for the yield strength.     

A tool for mass transfer evaluation in packed-bed columns for chemical engineering students

This paper presents a Microsoft Excel tool to calculate liquid-gas mass transfer coefficients in packed towers to support numerical design activities in the courses of Unit Operations for Industrial Process and Sustainable Process Design for the Master’s degree in Chemical Engineering of the University of Naples Federico II (Italy).The Mass Transfer Solver Tool (MT Solver Tool) uses several available models to estimate, separately, the values of liquid and gas mass-transfer coefficients and the wet surface area for 144 random and structured packings of interest for absorption/stripping and distillation processes. In addition, a separate spreadsheet can be used in a user-defined mode, to evaluate the mass transfer coefficients with new packing types or to interpret experimental data when the geometrical and physical characteristics of the packing are known. Eventually, the tool is supplied with a data library, where packing geometry and model fitting parameters can be retrieved.The software is aimed to support students and educators in the Unit Operations for Industrial Process and Sustainable Process Design courses. In particular, this is meant to be an example on how the accuracy of design algorithms adopted in unit operation processes is affected by the use of the underpinning correlations for mass transfer rate or pressure drops. Besides, this is aimed to encourage comparison of different correlations when exact field data are not available. Besides, chemical engineers and researchers interested in packed columns design and modelling data may also benefit from the utilization of the software. The MT Solver Tool was introduced to students in a dedicated tutorial lesson after lecturers on packed column design algorithms for distillation, absorption and stripping. Most of the students of the course participated to a group training aimed to simulate the design of an absorption column supported by the MT Solver Tool providing feedback on its application.After the training, an anonymous survey was proposed to the students to monitor the approval rating of the proposed activity and the use of the MT Solver Tool software to support numerical calculations.     

基于改进的Random Subspace的客户投诉分类方法

电信业的客户投诉不断增多而又亟待高效处理。针对电信客户投诉数据的特点，提出了一种面向高维数据的改进的集成学习分类方法。该方法综合考虑客户投诉中的文本信息及客户通讯状态信息，基于Random Subspace方法，以支持向量机（Support Vector Machine，SVM）为基分类器，采用证据推理（Evidential Reasoning，ER）规则为一种新的集成策略，构造分类模型对电信客户投诉进行分类。所提模型和方法在某电信公司客户投诉数据上进行了验证，实验结果显示该方法能够显著提高客户投诉分类的准确率和投诉处理效率。     

Physicochemical structure characteristics and intrinsic reactivity of demineralized coal char rapidly pyrolyzed at elevated pressure

This study aims to investigate the effect of pyrolysis pressure on the physical and chemical structure characteristics and reactivity of subbituminous demineralized coal char. The pyrolysis experiments were studied under different pressures using a pressurized drop tube reactor (PDTR). Structural properties of coal chars were investigated by the application of scanning electron microscopy (SEM), nitrogen adsorption analyzer, automatic mercury porosimeter, and Raman spectroscopy, respectively. The Random Pore Model was used to determine kinetic parameters and intrinsic reactivity of chars. The specific pore volume of chars pyrolyzed at 900–1000 °C increased first and then decreased with pyrolysis pressure increasing, and the maximum value of the specific pore volume of chars occurred at 1.0 MPa. The degree of graphitization of chars deepened with the increase of temperature or pressure. Intrinsic activation energy of char-O₂ was within the range of 126–134 kJ/mol. The intrinsic reactivity of char-O₂ reaction showed strong correlation the Raman parameters with the change of pyrolysis conditions, and it suggested that the intrinsic reactivity of char-O₂ reaction was mainly affected by aromatic ring structures rather than pore structures.     

Study on the long-term behaviour of glass fibre in the tensile stress field

Glass fibre is a random network structure composed of [SiO₄] tetrahedra. The structure contains a large number of defects, which act as crack initiation points. Under tensile stress, cracks undergo crack initiation, stable propagation, failure propagation, and fracture, and the stress that begins after unstable propagation is called the critical fracture stress. When the stress is less than the critical value, the crack is subject to the force of chemical bonds during the crack propagation process, and crack arrest occurs. When the stress is greater than the critical value, the glass fibre will undergo destructive fracture. In this paper, long-term tensile tests were carried out on glass fibre and a glass fibre composite under different constant tensile stress conditions. The fracture times of the glass fibre and glass fibre composite under different tensile stresses were obtained, the critical fracture stress of glass fibre was inferred, and the fracture mechanism was explained.     

基于Marr小波改进的SIFT算法的遥感影像配准

〖HTH〗通讯作者〖HTSS〗:[ZK（]金〓燕(1991-)，女，山东济宁人，硕士研究生，主要从事图形图像处理，图像与视觉信息计算方面的研究。E\|mail:jyan0529@163.com。[ZK）] 〖ZW)〗〖HT〗 〖AM〗〖HT5SS〗〖MM(〗〖ZZ(S〗〖HT5”〗〖SX(B〗第34卷〓第3期〖〗2019年6月〖SX)〗[KG0.2mm]〖KG7*3〗〖HT〗〖SX(B〗遥〓感〓技〓术〓与〓应〓用〖〗〖WT5，6〗REMOTE SENSING TECHNOLOGY AND APPLICATION〖SX)〗〓〓〓〓〖KG6*2〗〖WT5”BX〗〖SX(B〗Vol.34〓No.3〖〗Jun.2019〖WT〗〖SX)〗〖ZZ)〗〖MM)〗〖HT〗 〖HT2H〗〖JZ(〗〖WTHZ〗〖STHZ〗 基于Marr小波改进的SIFT算法的遥感影像配准 〖STBZ〗〖WTBZ〗〖HT4K〗 张海涛，金〓燕，刘万军 〖HT5K〗 (辽宁工程技术大学 软件学院，辽宁 葫芦岛〓125105) 〖JZ)〗〖ＨＴ５Ｈ〗〖GK2!2〗摘要〖HTK〗: [KG(0.1mm]针对遥感图像配准方法中错误匹配点对过多、配准效率低和其他性能，提出了一种基于小波的遥感图像配准方法。首先，利用尺度空间理论下的Marr小波对参考图像和待配准图像进行特征提取，然后利用欧氏距离对参考图像和待配准图像的特征点进行初配准，再根据随机采样一致法，对初配准结果进行精配准。为了验证方法的有效性，选择无人机实时航拍图像、不同时相变化遥感图像以及遥感不同高度的遥感图像。实验结果表明：该方法与SIFT(Scale Invariant Feature Transform)算法以及其他改进SIFT算法相比可以有效剔除错误匹配点对，提高了配准精度，同时提高配准效率两倍以上。该方法可以应用于不同遥感数据源，能够有效地提高配准精度，降低配准时间。[KG)] 〖ＨＴＨ〗关〓键〓词〖ＨＴ５Ｋ〗: 遥感图像配准;Marr小波;欧氏距离;随机采样一致法 〖ＨＴＨ〗中图分类号〖HTSS〗:TP79〓〓〖HTH〗文献标志码〖HTSS〗:A〓〓〖HTH〗文章编号〖HTSS〗:1004 0323(2019)03 0622 08 〖HK〗〖HT5SS〗     

Remaining useful life prediction for degrading systems with random shocks considering measurement uncertainty

Degradation data have been widely used for the remaining useful life (RUL) prediction of systems. Most existing works apply a preset model to capture the degradation process and focus on the degradation process without shocks or constant shock effects. More generally, the actual degradation path is unobservable due to the existence of measurement uncertainty, which interferes with the determination of the degradation model. Besides, the effect of random shocks is usually fluctuating. Given these problems, a general degradation model with the random shock fluctuant effects considering the measurement uncertainty is first developed to describe the degradation process, and a two-step approach combining the arithmetic average filter and the Bayesian information criterion is adopted to identify the degradation path. Subsequently, the transfer processes of the actual degradation state and the abrupt change caused by shocks are depicted using a two-dimensional state-space model, and an expectation-maximization algorithm combined with the particle filtering is developed for parameter estimation. Furthermore, the explicit solution of RUL distribution is obtained when only considering harmful shocks, while a simulation method of RUL distribution is provided when both harmful and beneficial shocks exist. Finally, the effectiveness of the proposed method is verified by a numerical example and two practical case studies.