Compatible performance of low thermal conductivity and high infrared radiation of Sm2O3-HfO2 series ceramics applied for thermal protection coatings

Sm₂O₃-HfO₂ series ceramics were synthesized at high temperature using the solid-state reaction. The phase stability, thermo-physical and infrared emission properties of Sm₂Hf₂O₇ (SHO) and Sm₂Hf₂O₇-44.83 wt%HfO₂ (25S/H) composite ceramics were comparatively investigated. Furthermore, their calcium magnesium aluminosilicate (CMAS) corrosion was conducted at 1250°C for different times. The results reveal that both SHO and 25S/H ceramics have excellent phase stability at 1600°C as well as excellent sintering resistance. SHO still exhibits slightly lower thermal conductivity and lower hardness and Young's modulus, higher thermal expansion coefficient (CTE) and fracture toughness as well as higher infrared emittance (0.899 at 800°C) than 25S/H composite with the excessive HfO₂ inside. Both SHO and 25S/H ceramics react with CMAS to form a relatively compact reaction layer, which can effectively prevent the penetration of CMAS. These results preliminarily indicate that SHO ceramic can be proposed as an alternative material of the traditional YSZ for high-temperature thermal protective applications thanks to its compatible performance of low thermal conductivity and high infrared radiation, etc.     

Compositional design,structure stability,and microwave dielectric properties in Ca3MgBGe3O12 (B = Zr,Sn) garnet ceramics with tetravalent cations on B-site

Two garnet-structured Ca₃MgBGe₃O₁₂ (B = Zr, Sn) ceramics with tetravalent cations at B-site were prepared by conventional solid state reaction. The crystal structure, microstructure evolution, and microwave dielectric performance were investigated using X-ray powder diffraction, Rietveld refinement, scanning electron microscopy, Raman spectroscopy, and infrared spectroscopy techniques. Dense Ca₃MgZrGe₃O₁₂ and Ca₃MgSnGe₃O₁₂ ceramics were obtained at sintering temperatures of 1420 and 1400 °C, respectively. The dielectric constant, unloaded quality factor, and temperature coefficient of resonance frequency of Ca₃MgZrGe₃O₁₂ were 10.80 ± 0.2; 79,600 ± 1000 GHz (f = 12.61 GHz); and ?66.8 ± 1 ppm/°C, respectively, and the corresponding values for Ca₃MgSnGe₃O₁₂ were 9.68 ± 0.2; 83,400 ± 1000 GHz (f = 14.19 GHz); and ?57.9 ± 1 ppm/°C, respectively. The dielectric performances of the two ceramics were compared by analyzing the ionic polarizability, packing fraction, and bond valence. The intrinsic dielectric properties were predicted by fitting the infrared reflectivity spectra.     

Evolution of core–rim structures and phase transformations in infra-red transmitting Y-α-SiAlON ceramics

Core–rim structures were observed as common features in Y-α-SiAlON ceramics hot-pressed between 1550?1950 °C. We found most dopants were taken into α’-rims, and a transition layer grown first on α-cores from liquid-phase over-saturated with metal solutes. Elongated β’-grain were formed as minor phase with α’- or AlN-cores thus only after the α’ matrix had consumed up all Y solutes, revealing that the α’ → β’ transformation is controlled by the transient liquid-phase and similar defects and dangling bonds could be detected in both SiAlON phases by cathodoluminescence. Quantitative assessment of Y_m/3Si_12?(m+n)Al_m+nO_nN_16?n demonstrates the multiphase evolution, initiated by over-saturation of Y solutes at low temperatures thus retaining α-phase as cores to lower the infra-red transmittance, dictated by homogenization of Al solutes at higher temperature. The elimination of those phase boundaries leads to better dopant and sintering design for achieving transparent and high-performance SiAlON ceramics.     

军用涤纶长丝面料热转移印花及功能整理研究

介绍涤纶长丝面料分散染料热转移印花工艺,包括工艺流程、主要技术创新、产品应用等方面。阐述涤纶长丝面料阻燃涂层整理技术,并讨论阻燃剂用量、涂层增重量对整理效果的影响。总结防热红外侦察整理、防雷达波侦察整理、多功能迷彩面料生产及要点。文章表明,化纤长丝纺织产品的发展与国防建设是密切相关、相互促进、相辅相成的。以化纤长丝为基材生产的系列化军用产品是建设强大国防的重要保障。不断深化化纤长丝面料的功能性深度加工具有非常重要的意义。     

Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

Infrared radiation and thermal cyclic performance of a high-entropy rare-earth hexaaluminate coating prepared by atmospheric plasma spraying

In this study, a high-entropy RMgAl₁₁O₁₉ (HE-RMA, R = La, Pr, Nd, Sm, Gd) and LaMgAl₁₁O₁₉ (LMA) coatings were fabricated by atmospheric plasma spraying. The phase composition, microstructure, thermal stability, infrared emissivity performance and shock resistance were comparatively characterized. The results showed that doping multiple rare-earth cations could be conductive to enhance the infrared emissivity. The as-sprayed HE-RMA coating exhibited the highest infrared emissivity, which reached up to 0.971 at 1000 °C. The reason for the improvement of the infrared emissivity was attributed to introduced impurity energy level resulting from doping cations, which could reduce the forbidden bandwidth and increase probability of electronic transition. Meanwhile, HE-RMA coating exhibited better shock resistance at 1100 °C due to superior fracture toughness (1.84 ± 0.41 MPa·m^1/2) during thermal cycling test at 1100 °C. In addition, HE-RMA coating still exhibited high infrared emissivity (0.932 at 1000 °C) at 1100 °C annealing for 100 h with only a slight reduction.     

Evaluation of particle recovery from microalgae

Coccoliths are micro-structured biomineral particles found in cell protective covering layers of coccolithophore species. They are mainly composed of CaCO₃ and their individual crystal entities are arranged in such a way that they construct complex and unique structures. This complexity is found down to the individual particle level and appears to have promising properties to offer. This study focuses on the essential step prior to any kind of implementation, which is the recovery of the material. It summarizes cleaning protocols found in literature, compares them for the first time for the same freshly cultivated material and addresses challenges that still need to be overcome. Further, it highlight the advantages and disadvantages of the best cleaning protocols, suggests optimizations with promising results and uses size distribution measurements to analyse the recovery efficiency. To that end, further characterization techniques, new for coccoliths, are introduced and used to improve our current knowledge of the particles behaviour.     

生物质石墨烯改性黏胶长丝制备与性能研究

采用湿法纺丝技术将生物质石墨烯浆料与黏胶原液共混纺丝,制备生物质石墨烯改性黏胶长丝,并对其横截面形态、红外光谱、力学性能、抗菌性能、远红外性能进行测试。结果表明,当石墨烯添加量为2.5%时,纤维的干、湿断裂强度分别为1.85、0.90 cN/dtex,干断裂伸长率为22.33%,达到国家标准一等品要求;纤维对大肠杆菌、白色念珠菌和金黄色葡萄球菌的抑菌率均大于99%,远红外辐射升温值为3.2℃,远红外发射率为0.89。生物质石墨烯改性黏胶长丝光滑舒适、柔软亲肤、绿色可降解,是纺织面料的优选原料。     

Generalization of the thermal model of infrared radiation sensors

In many theories and applications, generalized models can give a good head start for further research where the implementation of new elements and/or boundary conditions could become quite complex. In this paper the development of a compact thermal model of an infrared sensor will be presented. This thermal model includes not only the thermal resistances and capacitances of the sensor structure itself but the radiative and convective thermal resistances to the ambience and between the sensor plate and the heat source (thermal transfer impedance) which is important when the heat source and the sensor are in close proximity. Limitations and the applicability of the proposed model are also discussed. We also aim to present how the proposed model can be used for other IR sensor structures as well.