On a large-gain theorem

The aim of this paper is to give a general quantitative requirement which the loop gain must satisfy in order to stabilize a given unstable (possibly nonlinear and time-varying) plant, namely that the gain must exceed one.     

A versatile data acquisition system for time resolved X-ray scattering using gas proportional detectors with delay line readout

A data acquisition system for time resolved X-ray scattering experiments using linear, quadrant or area gas proportional detectors with delay line readout based on commercially available hardware (National Instruments) is described. The system can easily be configured for recording data from point detectors (e.g. photomultipliers and photodiodes) and/or ancillary data only. Applications involving measurements with two different types of time to digital converters illustrate the features and performances of the system.     

基于Web的中小型企业销售管理信息系统的设计与应用

针对中小型企业销售管理的现状，利用J2EE架构技术设计了面向中小型企业的销售管理信息系统，该系统具有良好的跨平台性和可移植性，并且经过测试运行，达到了预期的效果。     

Absolute Measurements of the Magnetic Field Generated by Different Coils in the Center of EGYPTOR Tokamak

The present work is devoted to measure the absolute magnetic field produced by different coils in the EGYPTOR tokamak using a calibrated pickup coil. Scaling these measurements in different equations connected with the discharge currents from each supply system are performed. The pickup coil used in the present study is well calibrated with Helmholz coils at the IPP in Prague, Czech Republic. A 0.2% deviation has been found between an evaluation done in the present study and the calibration using Helmholz coils. Experimental measurements of the toroidal magnetic field are in good agreement with calculations to within 2%. Very low values of stray magnetic field components arising from TF and OH coils are recorded which proves that the compensation coils for these components are sufficient.     

小型办公网络组网

通过实例,对小型办公网络组网中涉及到的需求设计、网络连接、网络设备、设备连接等进行了论述。     

Analysis of crack tip plasticity for microstructurally small cracks using crystal plasticity theory

Crack tip plastic zone sizes and crack tip opening displacements (CTOD) for stationary microstructurally small cracks are calculated using the finite element method. To simulate the plastic deformation occurring at the crack tip, a two-dimensional small strain constitutive relationship from single crystal plasticity theory is implemented in the finite element code ANSYS as a user-defined plasticity subroutine. Small cracks are modeled in both single grains and multiple grains, and different crystallographic conditions are considered. The computed plastic zone sizes and CTOD are compared with those found using conventional isotropic plasticity theory, and significant differences are observed.     

Almost k-wise independence versus k-wise independence

We say that a distribution over {0,1}ⁿ is (ε,k)-wise independent if its restriction to every k coordinates results in a distribution that is ε-close to the uniform distribution. A natural question regarding (ε,k)-wise independent distributions is how close they are to some k-wise independent distribution. We show that there exist (ε,k)-wise independent distributions whose statistical distance is at least n^O(k)·ε from any k-wise independent distribution. In addition, we show that for any (ε,k)-wise independent distribution there exists some k-wise independent distribution, whose statistical distance is n^O(k)·ε.     

精密有源互感器的研制

本文介绍了精密有源电流互感器的原理和设计方法。该互感器的准确度达到０．０１级，线性度优于１×１０－５．     

AN EXPERIMENTAL INVESTIGATION OF THE GROWTH OF SMALL CORNER FATIGUE CRACKS IN ALUMINIUM 6061-T651

Results of an experimental investigation of the fatigue growth of small corner cracks emanating from small flaws are presented. Growth-arrest behaviour was observed, and increases in crack length during growth periods were of the order of the transverse grain size. For the test material, the corner crack front intersects, on average, only three–six grains in the small crack regime monitored, so only a small number of constrained, interior grains is encountered. It is suggested that the presence of partially constrained surface grains may contribute to the 'anomalous' growth behaviour which has been observed by a number of investigators.
The crack growth histories of the test data presented exhibit considerable scatter. It is shown that a Student's t -test can be used to estimate confidence intervals in order to provide a measure of the observed scatter. The variation in confidence intervals in the transition from small to long fatigue crack growth is discussed.     

毛细管SDS无胶筛分电泳测定小分子多肽相对分子质量

目的建立快速毛细管SDS无胶筛分电泳法(SDS-NGS),测定小分子多肽相对分子质量。方法涂层毛细管(管长30cm,内径100μm);分离电压为9kV(300V/cm),分离温度为20℃;检测波长为214nm,检测时间为18min;所用SDS-多肽相对分子质量标准范围为2 512~16 949;以橙G(OG)为内标参照物。结果在相对分子质量2512~16949范围内,多肽相对分子质量的对数与其相对迁移率具有良好的线性关系(r=0.996);应用该方法测定了重组人奈西立肽、重组人表皮生长因子、虎纹镇痛肽、重组人心钠肽4种重组小分子多肽的相对分子质量,所测结果变异系数CV均小于3%。结论毛细管SDS无胶筛分电泳方便快速,灵敏度高,重现性好,结果准确,可作为小分子多肽相对分子质量的检测方法。