Subsampled terahertz data reconstruction based on spatio-temporal dictionary learning

In this paper, the problem of terahertz pulsed imaging and reconstruction is addressed. It is assumed that an incomplete (subsampled) three dimensional THz data set has been acquired and the aim is to recover all missing samples. A sparsity-inducing approach is proposed for this purpose. First, a simple interpolation is applied to incomplete noisy data. Then, we propose a spatio-temporal dictionary learning method to obtain an appropriate sparse representation of data based on a joint sparse recovery algorithm. Then, using the sparse coefficients and the learned dictionary, the 3D data is effectively denoised by minimizing a simple cost function. We consider two types of terahertz data to evaluate the performance of the proposed approach: THz data acquired for a model sample with clear layered structures (e.g., a T-shape plastic sheet buried in a polythene pellet), and pharmaceutical tablet data (with low spatial resolution). The achieved signal-to-noise-ratio for reconstruction of T-shape data, from only 5% observation was 19 dB. Moreover, the accuracies of obtained thickness and depth measurements for pharmaceutical tablet data after reconstruction from 10% observation were 98.8%, and 99.9%, respectively. These results, along with chemical mapping analysis, presented at the end of this paper, confirm the accuracy of the proposed method.     

基于太赫兹波的复合绝缘子界面检测研究

复合绝缘子的交界面缺陷问题严重威胁着电网的安全运行。为了有效评估复合绝缘子的界面性能,研究基于太赫兹波的无损检测方法。首先理论分析了太赫兹反射波在不同性能界面中的传播过程。测试界面气隙、蚀损缺陷情形的太赫兹反射波,分析太赫兹波在含缺陷界面中的反射传播特性。针对气隙缺陷,提出通过太赫兹波形特征比对的定量检测方法;针对蚀损缺陷,提出基于波形差值的成像检测方法。根据太赫兹波形特征信息,可对界面气隙和蚀损缺陷进行分类诊断。对实际缺陷的测试表明,太赫兹时域反射波在复合绝缘子界面缺陷检测中具有较高的应用价值。     

Active EIT-like Dependent on Polarization Angle with Graphene Metamaterial

Abstract

An active electromagnetically induced transparency (EIT) analog adopting graphene as microstructure of metamaterial is investigated. The analog consist interconnected graphene strip (GS) and graphene split ring resonator (GSRR), which can act as bright and dark elements alternately. The distinct EIT-like effect can be generated by bright-dark mode coupling in x and y polarization directions. Further investigations reveal that EIT peak can be actively controlled via Fermi level of graphene, and theoretical analysis based on two particles mode express the reason. Moreover, notable EIT-like effect can also be generated in a wide range of polarization angles, and impact of polarization angle on EIT peak is also discussed in detail. These characteristic paves the way for the applications of EIT-like in sensor device.     

Lattice dynamics and terahertz response of microwave dielectrics: A case study of Al-doped Ca0.6Sm0.27TiO3 ceramics

Low-loss microwave dielectric ceramics are of great significance for fifth-generation telecommunication (5G) devices used for higher frequencies, while reducing the dielectric loss in the microwave band is still a technical challenge. Lattice dynamics and terahertz response are closely related to the polarization of dielectrics, and can be used as effective methods to explore the loss mechanism of microwave dielectrics. Here, Al³⁺ was doped into the conventional high-permittivity (ε_r) Ca_1-xSm_2x/3TiO₃ (x = 0.4) ceramic system, enhancing the Q×f values significantly. Raman spectra, thermally stimulated depolarization currents (TSDC) and terahertz time-domain spectra (THz-TDS) together showed that the stiffness of cation vibration became stronger when z value was larger, indicating a smaller damping of the lattice vibration, and leading to lower extrinsic losses and higher Q×f values. The relationship between lattice dynamics, defect behavior and microwave dielectric loss will provide a significant reference for the development of low-loss microwave dielectric ceramics.     

Optical constants of CuO and ZnO particles in the terahertz frequency range

The optical constants (complex dielectric function) of CuO and ZnO particles in polyethylene pellets are measured by terahertz time-domain spectroscopy. The determination of the dielectric properties of these materials is of interest for energy-storage applications, for instance. Maxwell-Garnett theory is used to extract the contribution to the frequency-dependent optical constants of the oxide powders. The validity of the assumptions of Maxwell-Garnett theory are experimentally verified and self-consistency of the results of the model confirmed. On this basis, experimental complex permittivity values for isotropic CuO and ZnO oxide powders are reported in the 100 GHz-3 THz range.     

Compact Terahertz Wave Collimator Design with Photonic Crystal Slabs

A compact terahertz (THz) wave collimator is proposed,which works under the frequency from 2.4 THz to 2.7 THz with a photonic crystal (PC) slab based on the self-collimation effect.The plane wave expansion (PWE) method is used to calculate the dispersion surfaces and the equal-frequency contours (EFCs) and optimize the structure.The propagation of the THz waves in the structure is simulated and the normalized transmission is calculated by using the finite-difference time-domain (FDTD) method with perfectly matched layer (PML) absorbing boundary conditions.Numerical simulations show that the designed collimator has a good collimation property and a high transmittance.     

Performance analysis of an open-loop resonator loaded terahertz microstrip antenna

In this paper, an enhanced electrical performance of the open-loop loaded microstrip patch antenna at terahertz frequency has been investigated. The proposed antenna is designed to radiate at frequencies in the range of 0.5-0.7 THz with high gain and radiation efficiency. The effect of various substrate parameters on the electrical performance of the proposed antenna has been analyzed and simulated. The simulation has been performed using the CST Microwave studio, a commercial simulator based on finite integral technique. The directivity and radiation efficiency of the proposed antenna is 22.58 dBi and 94.50%, respectively, at 600 GHz. Further, the simulated results have been compared with Ansoft HFSS, a commercially available simulator based on the finite element method. We have also compared this proposed analytical result with reported literature with scale down approach.     

Hg1-xCdx Te晶体生长及太赫兹性能研究

利用移动加热区方法(THM)生长了不同Cd组分的Hg1-xCdxTe晶体,通过傅立叶光谱仪和太赫兹时域光谱系统,研究了不同Cd组分Hg1-xCdxTe晶体在红外波段和太赫兹波段的透射光谱.当Cd组分小于0.279时,Hg1-xCdxTe材料在0.2～1.5 THz波段透过率接近0.在0.9 THz附近观察到Hg1-xC...     

汽油中烃类物质的太赫兹时域光谱研究

本文应用太赫兹时域光谱技术研究了在室温氮气环境下催化裂化汽油中芳烃、烯烃的光学性质,以芳烃中二甲苯、均三甲苯及烯烃中二异丁烯为例,分析了含有不同浓度二甲苯、均三甲苯和二异丁烯的催化裂化汽油在太赫兹波段的光谱效应。结果表明,汽油中不同浓度的芳烃和烯烃具有不同的吸收谱和折射率特性。根据太赫兹光谱包含的特征信息能够对汽油中芳烃、烯烃成分进行定性分析,从而为汽油中烃含量的定量检测做基础。     

220 GHz折叠波导慢波结构的有损参数化模型

建立了自洽的考虑波导璧损耗的折叠波导等效电路模型,用来计算该慢波结构周期TE10模式中各次空间谐波的相速度,耦合阻抗和线衰减系数.分析结果将会用到220 GHz折叠波导返波管一维束波互作用模型的计算中.当微波频率上升到太赫兹波段时,粗糙波导表面电流导致的壁损将不能再忽略不计.进一步研究表明,起振电流和输出功率水平将和损耗特性的计算密切相关.从原有模型发展而来的有损电路模型可以给出更准确损耗估计.建立了折叠波导慢波线三维谐振腔模型来验证本文的等效电路理论,有较好的吻合.采用了该理论导出参数的一维束波互作用模型和三维数值PIC方法同样有很好的一致性.