25%小偏置碰撞策略及测试评估研究

随着汽车事故的增加,且小重叠碰撞事故死亡率居高不下,小偏置碰撞试验逐渐成为焦点。基于IIHS公布的最新车辆碰撞试验结果,统计超过100余款不同类型的25%小偏置碰撞车辆,建立碰撞转角与碰撞区域的数学模型,将25%小偏置碰撞归结为三种不同的碰撞策略,分别是吸能策略、掠过策略和掠过与吸能策略;并进行试验验证,对三种策略的优缺点进行分析。结果表明,小偏置碰撞试验可运用合理的碰撞策略达到法规要求,对25%小偏置碰撞试验具有一定的参考价值。     

火箭发动机试验台快速高效高可靠试验技术

随着卫星系统组网及发射任务的增加,某运载火箭上面级发动机需求量猛增,试验系统和试验流程已经无法满足形势任务的需求。通过技术改造和流程优化,采用了一系列多余物控制、试验流程监控及可靠性提升等技术,实现了某试验台试验的快速、高效、高可靠,大大提高了试验效率。     

Energy dissipation capacity of fibre reinforced concrete under biaxial tension–compression load. Part I: Test equipment and work of fracture

The objective of this research was to analyse the differences in the dissipated energy under uniaxial tension and biaxial tension–compression load of fibre reinforced concretes using the Wedge Splitting Test. Under biaxial load the specimens were subjected to compressive stress ratios from 10% to 50% of the concrete compressive strength perpendicular to the direction of the tensile load.Under biaxial tension–compression load the energy dissipation capacity of the specimens decreases compared to the uniaxial tension load case on average 20–30%. It is believed that the decrease is a result of the damage mechanism of the concrete matrix and deterioration of the fibre–matrix and/or aggregate–cement paste interfaces in case the section is additionally loaded with compression stresses. This indicates that dimensioning of concrete elements under biaxial stress states using material parameters obtained from tests conducted on specimens under uniaxial tensile load is unsafe and could potentially lead to a non-conservative design.In the second part of this paper the extent of the fracture process zone under uniaxial tension and biaxial tension–compression load will be examined with the Acoustic Emission technique and the reasons for decrease of the energy dissipation capacity under biaxial load will be further discussed.     

Evaluation of electrochemical properties of antibacterial ZnO layers deposited to 316LVM steel using atomic layer deposition

The presence of a biofilm can lead to the disappearance of the surrounding bone tissue and, as a result, disturb the osseointegration process. Unfortunately, both in the case of instability of the implant and long-term bacterial infections, there is often a need for reoperation as well as replacement of the implant, which in turn is associated with huge costs, but most of all discomfort for the patient associated with long-term hospitalization. In order to limit this unfavorable process, the physicochemical properties of the surface layer of implants are indicated. Therefore, the paper proposes applying a layer with antibacterial effect on the surface of 316LVM steel used in bone surgery. As part of the work, the ZnO layer was applied using the atomic layer deposition method with different parameters of the application process (different number of cycles at constant temperature). In the first stage, pitting corrosion resistance tests were carried out using the potentiodynamic method and studies using electrochemical impedance spectroscopy. The surface morphology tests using a scanning electron microscope were also complemented. Obtained results may form the basis for the development of more detailed criteria for the assessment of the final quality of medical devices used in the skeletal system.     

基于Moldflow和UG的手机前盖模具设计

根据手机前盖的结构特点和质量要求,运用Moldflow软件对产品浇注系统、冷却系统进行优化设计。通过正交试验,分析了注射工艺参数对产品体积收缩率和翘曲变形的影响规律,得到优化注射工艺方案。根据Moldflow分析结果,利用UG软件完成产品的模具设计。     

A methodology for predicting and comparing the full‐scale fire performance of similar materials based on small‐scale testing

Reconstructive fire testing is an important tool used by fire investigators to determine the cause, origin, and progression of a particular fire. Accurate reconstruction of the fire requires the laboratory structure to be outfitted with materials that, in terms of contribution to fire growth, perform similarly to the original materials found at the fire scene. Therefore, a procedure was developed to enable fire investigators to select these replacement materials on the basis of a quantitative assessment of their relative fire performance. This procedure consists of gram‐scale and/or milligram‐scale standard testing accompanied by inverse numerical modeling of these tests, which is used to obtain relevant material properties. A numerical model composed of a detailed pyrolysis submodel and empirical flame heat feedback submodels, which were developed in this study, is subsequently employed to simulate the early stages of the Room Corner Test, which was selected to represent full‐scale material performance. The results of these simulations demonstrate that this procedure can successfully differentiate between fire growth propensities of several commercially available medium density fiberboards.     

Evaluation of 3 esterase tests for the diagnosis of subclinical mastitis at dry-off and freshening in dairy cattle

Subclinical mastitis (SCM) and intramammary infection (IMI) increase esterase activity in the glandular secretions of dairy cattle. Our objective was to evaluate the clinical performance of 3 commercially available esterase tests for diagnosing SCM and IMI. Foremilk samples were collected from 380 quarters (96 cows) at dry-off and from 329 quarters (83 cows) within 4 to 7 d after calving. Quarter somatic cell count (SCC) was measured using the reference method (DeLaval cell counter; De Laval International AB, Tumba, Sweden) with SCM defined as SCC >200,000 cells/mL. Bacterial culture of foremilk samples was used to diagnose IMI based on the growth of ≥100 cfu/mL. The SCC was estimated using 3 PortaSCC tests (PortaCheck, Moorestown, NJ) from the measured esterase activity and the California Mastitis Test (CMT). Clinical performance was evaluated using logistic regression to determine the area under the receiver operating characteristic curve (AUC) and identify test sensitivity (Se) and specificity (Sp) at the optimal cut-point for diagnosing SCM and IMI. Test agreement was also evaluated using the kappa coefficient (κ) and weighted κ. The PortaSCC color test was the best-performing PortaSCC test for diagnosing SCM at dry-off (AUC = 0.90, Se = 0.91, Sp = 0.81, κ = 0.71) and at freshening (AUC = 0.86, Se = 0.74, Sp = 0.95, κ = 0.72), at an optimal cut-point of ≥250,000 cells/mL but required 45 min to produce a result. For comparison, the CMT required 2 min to produce a result and a CMT score of trace or higher was superior to the PortaSCC color test for diagnosing SCM at dry-off (AUC = 0.95, Se = 0.95, Sp = 0.86, κ = 0.81) and freshening (AUC = 0.88, Se = 0.79, Sp = 0.95, κ = 0.76). The PortaSCC quick test was the best-performing PortaSCC test for diagnosing IMI at dry-off (AUC = 0.81, Se = 0.81, Sp = 0.78 κ = 0.40) and required 5 min to produce a result, whereas the PortaSCC color test was the best performing PortaSCC test for diagnosing IMI at freshening (AUC = 0.80, Se = 0.75, Sp = 0.79 κ = 0.38). For comparison, the CMT was inferior to the PortaSCC quick test for diagnosing IMI at dry-off (AUC = 0.73, Se = 0.76, Sp = 0.60, κ = 0.20) but was equivalent to the PortaSCC color test at freshening (AUC = 0.79, Se = 0.58, Sp = 0.93, κ = 0.50). The PortaSCC color and quick tests and CMT were considered good tests for diagnosing SCM and IMI because clinically useful tests typically have an AUC >0.80 and κ >0.6. Based on the test sensitivity, cost, and analysis time, there does not appear to be a persuasive reason to select the PortaSCC tests over the traditional CMT for diagnosing SCM and IMI.     

A test method for evaluating the thermal environment of underground coal mine refuge alternatives

Since 2009, the Mine Safety and Health Administration(MSHA) has required mines to install refuge alternatives(RAs) in underground coal mines. One of the biggest concerns with occupied RAs is the possible severity of the resulting thermal environment. In 30 CFR 7.504, the maximum allowable apparent temperature(AT) for an occupied RA is specified as 35 °C(95 °F). Manufacturers must conduct heat/humidity tests to demonstrate that their RAs meet the 35 °C(95 °F) AT limit. For these tests, heat input devices are used to input the metabolic heat of actual miners. A wide variety of test methods, sensors, and heat input devices could be used when conducting such tests. Since 2012, the National Institute for Occupational Safety and Health(NIOSH) has conducted over thirty 96-hour heat/humidity tests on four different RAs. This paper discusses the test equipment and procedures used during these investigations. This information is useful for RA manufacturers conducting RA heat/humidity tests, for other researchers investigating RA heat/humidity buildup, and for those who need to assess the thermal environment of any confined space where people may be trapped or are seeking refuge.     

Discrete event simulation case study: Diagnostic path for stroke patients in a stroke unit

Hospitals aim at delivering efficient and effective healthcare. This requires high quality medical care, provided by highly trained and motivated professionals. Also the way operations are organized can contribute to a smoother healthcare delivery. An important point here is patient flow and waiting times during the patient trajectory diagnosis-therapy-care. Due to the large variability that exist between patients care needs, even for patients with a similar pathology, predicting the waiting times is very challenging. Traditional analytical optimization models like queuing theory cannot cope with the complexity of the pathways followed by patients and the interrelationships between the resources they need. Discrete event simulation can help to provide insight into the impact of operational changes, e.g. concerning available scanner capacity, on the timing of the patient’s trajectory in a hospital unit.This paper focuses on the diagnostic part of the stay of stroke patients in a stroke unit of a university hospital. With the help of discrete event simulation this patient flow is analyzed and the impact of potential changes in the capacity profile of test resources is investigated. The paper describes the steps taken in the study and the challenges met. The structure of the simulation program is explained and the results of the scenario analysis are discussed. The paper starts with a brief exploration of the use of discrete event simulation in healthcare and ends with general observations on the subject.