张庄铁矿高阶段矿房切割天井施工工艺试验

张庄铁矿设计采矿方法为大直径深孔阶段空场嗣后充填法。为了最大化发挥采矿设备性能，降低采切工程量，提高回采效率，通过实施一系列技术攻关，实现了将采矿阶段高度由原来的60 m提高到90 m。而作为最初爆破回采的自由面及爆破补偿空间，切割天井施工工艺为影响高阶段矿房爆破回采效果的关键因素，施工质量的优劣，直接影响矿房爆破回采生产作业能否顺利进行，而二次处理在增加施工成本的同时将带来安全隐患。张庄铁矿在面临可参考的成熟经验较少的情况下，结合现场可用的作业条件采取了对比试验的方法，在安全、技术及经济多方面综合分析比较下，确定了最终方案，为张庄铁矿安全稳定生产奠定了基础，同时研究成果可为大型地下矿山生产实践提供一定的参考。     

Combined constant speed control method for a wind generator equipped with hydraulic energy storage

A wind generator equipped with hydraulic energy storage (WG‐HES) uses hydraulic transmission systems instead of gearbox transmissions, thus eliminating high‐power converters and reducing the tower‐top cabin weight. When there is no wind or the wind speed is extremely low, the pressured oil released by accumulators is used to drive a motor to operate at a constant speed, thereby generating constant‐frequency power. However, few studies have examined the constant speed control characteristics for generating electricity using only an accumulator group. In this study, a combined constant speed (CCS) proportional–integral–derivative (PID) control method based on “variable displacement and throttling” is proposed, which includes two closed loops and one regulating loop. First, a simulation model of the CCS PID control method for a variable motor was established in the Simcenter Amesim program. The influence of different PID parameters on the anti‐interference ability of the constant speed control of the motor was analyzed under a given load step. Then, we obtained the range of control parameter values and a set of optimal values. Second, the effectiveness of the CCS control method and the accuracy of the simulation results were verified on a 600‐kW WG‐HES system prototype. The results verified that the CCS control method has good anti‐interference ability and can meet the requirements of constant speed control for a variable motor under the best PID parameters. These results can provide a basis for developing control strategies for WG‐HESs when there is no wind or at low wind speeds.     

面源红外诱饵对抗红外制导导弹干扰策略研究

面源红外诱饵使用的过程中,合理有效的干扰策略是干扰红外制导导弹的关键,针对这一问题,通过理论分析与仿真模拟相结合得到面源红外诱饵对抗红外制导导弹的干扰策略。首先以红外成像制导导弹为例,介绍红外制导导弹的仿真模型,然后将攻击过程分为锁定前与锁定后,以命中率为评价指标,得到两个阶段下的最佳干扰策略,包括诱饵的最佳释放时机、释放间隔以及载机应采取的机动动作等。     

藕节多酚超声波辅助提取工艺优化及其抗油脂氧化能力研究

以藕节多酚得率为评价指标,超声时间、超声温度、料液比和乙醇体积分数为影响因素,通过单因素试验和Box-Behnken(BBD)试验设计优化藕节多酚的提取工艺条件,同时采用恒温箱热贮藏试验法研究藕节多酚的抗油脂氧化能力。结果表明:藕节多酚的最佳提取条件为超声时间34 min、超声温度50℃、料液比1∶20、乙醇体积分数70%,在此条件下藕节多酚得率为(7. 11±0. 14)%;藕节多酚能够明显减缓油脂过氧化值的升高趋势,对动植物油脂的自氧化均有明显的抑制作用,且具有一定的浓度依赖性。     

雷达目标辨识网络的对抗性样本分析

为了验证雷达目标辨识网络存在风险,提升基于辨识网络的雷达目标辨识效果,文中研究了不同雷达目标辨识网络的对抗性样本。针对雷达目标辨识网络中的卷积神经网络和分解卷积神经网络,建立对抗性样本生成模型,按照该模型生成对抗性样本,并对生成的结果进行分析总结。实测数据处理结果表明,雷达目标辨识网络存在潜在风险。     

Efficient Photomodulation of Visible Eu(III) and Invisible Yb(III) Luminescences using DTE Photochromic Ligands for Optical Encryption

This work describes a class of complex combining three dithienylethene units and a lanthanide ion used as an optical system displaying a double encryption method: i) a colorful code, drawn and erased under UV and visible irradiations respectively, due to coloration and discoloration of the photochromic entities, and ii) a concomitant gradual disappearance and progressive restoration of the associated lanthanide ion luminescence triggered with the same stimuli. The innovation of the system stems from the emission color tunability, i.e., with either a lanthanide ion emitting only in the visible range (Eu³⁺) or with another lanthanide ion emitting only in the near infrared (NIR) range (Yb³⁺), therefore observable, or not, to the naked eye. This system is the very first one to achieve efficient repeatable modulation of pure NIR luminescence on photochemical command. Furthermore, it is proven to be highly efficient when embedded in a PDMS polymer opening real opportunities for practical applications as anti‐counterfeiting.     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

FHT型缓冲托罐装置在竖井提升中的应用

介绍一种缓冲托罐装置,主要用来解决竖井提升中的容器过卷撞击防撞梁后的托罐问题,既可用于缠绕式提升机,又可用于摩擦式提升机。重点介绍了该装置的工作原理、特点、安装调试和使用维护方面的情况。该装置经过4a多的使用,证明是可行的。