采用温控和碘吸收池技术的发射激光稳频技术

多普勒测风激光雷达通过分析系统回波信号的多普勒频移反演出风速，为提高风场探测精度，从稳频技术方面展开研究。在稳频过程中，分别采取措施消除激光频率的长期漂移和短期抖动。针对激光频率的长期漂移，设计并研制了种子激光器温控箱，通过水浴的控温方式大大减小了激光频率的长期漂移，将激光频率稳定在±50 MHz以内；针对激光频率的短期抖动，采用以碘分子吸收池为核心器件的稳频系统，通过半导体控温方式对碘分子吸收池精确控温，控温精度达0.03 ℃，提高了稳频精度，将激光频率进一步稳定在±8 MHz以内，满足±10 MHz以内的设计精度要求。通过搭建多普勒测风激光雷达系统，对发射激光稳频装置进行系统验证，连续4组风场观测结果表明:系统探测高度为17 km，绝大部分方差在4 m/s以下，满足测风激光雷达测量指标的要求。     

Alterations in the Genomic Distribution of 5hmC in In Vivo Aged Human Skin Fibroblasts

5-Hydroxymethylcytosine (5hmC) is a functionally active epigenetic modification. We analyzed whether changes in DNA 5-hydroxymethylation are an element of age-related epigenetic drift. We tested primary fibroblast cultures originating from individuals aged 22–35 years and 74–94 years. Global quantities of methylation-related DNA modifications were estimated by the dot blot and colorimetric methods. Regions of the genome differentially hydroxymethylated with age (DHMRs) were identified by hMeDIP-seq and the MEDIPS and DiffBind algorithms. Global levels of DNA modifications were not associated with age. We identified numerous DHMRs that were enriched within introns and intergenic regions and most commonly associated with the H3K4me1 histone mark, promoter-flanking regions, and CCCTC-binding factor (CTCF) binding sites. However, only seven DHMRs were identified by both algorithms and all of their settings. Among them, hypo-hydroxymethylated DHMR in the intron of Rab Escort Protein 1 (CHM) coexisted with increased expression in old cells, while increased 5-hydroxymethylation in the bodies of Arginine and Serine Rich Protein 1 (RSRP1) and Mitochondrial Poly(A) Polymerase (MTPAP) did not change their expression. These age-related differences were not associated with changes in the expression of any of the ten-eleven translocation (TET) enzymes or their activity. In conclusion, the distribution of 5hmC in DNA of in vivo aged human fibroblasts underwent age-associated modifications. The identified DHMRs are, likely, marker changes.     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

Complementary Kalman Filter as a Baseline Vector Estimator for GPS-Based Attitude Determination

The Global Positioning System (GPS) offers the interferometer for attitude determination by processing the carrier phase observables. By using carrier phase observables, the relative positioning is obtained in centimeter level. GPS interferometry has been firstly used in precise static relative positioning, and thereafter in kinematic positioning. The carrier phase differential GPS based on interferometer principles can solve for the antenna baseline vector, defined as the vector between the antenna designated master and one of the slave antennas, connected to a rigid body. Determining the unknown baseline vectors between the antennas sits at the heart of GPS-based attitude determination. The conventional solution of the baseline vectors based on least-squares approach is inherently noisy, which results in the noisy attitude solutions. In this article, the complementary Kalman filter (CKF) is employed for solving the baseline vector in the attitude determination mechanism to improve the performance, where the receiversatellite double differenced observable was utilized as the measurement. By using the carrier phase observables, the relative positioning is obtained in centimeter level. Employing the CKF provides several advantages, such as accuracy improvement, reliability enhancement, and real-time assurance. Simulation results based on the conventional method where the least-squares approach is involved, and the proposed method where the CKF is involved are compared and discussed.     

Preprocessed dynamic classifier ensemble selection for highly imbalanced drifted data streams

This work aims to connect two rarely combined research directions, i.e., non-stationary data stream classification and data analysis with skewed class distributions. We propose a novel framework employing stratified bagging for training base classifiers to integrate data preprocessing and dynamic ensemble selection methods for imbalanced data stream classification. The proposed approach has been evaluated based on computer experiments carried out on 135 artificially generated data streams with various imbalance ratios, label noise levels, and types of concept drift as well as on two selected real streams. Four preprocessing techniques and two dynamic selection methods, used on both bagging classifiers and base estimators levels, were considered. Experimentation results showed that, for highly imbalanced data streams, dynamic ensemble selection coupled with data preprocessing could outperform online and chunk-based state-of-art methods.     

高校网络安全建设的探索与思考

The construction of cybersecurity is an important part of the information construction in university. It is an indispensable condition to help the information construction and a strong guarantee to serve the information support of teachers and students in uni- versity. The cybersecurity environment, atmosphere and guarantee ability of university need to be improved. Based on the related work and achievements of cybersecurity construction, some general schemes are put forward to provide reference for cybersecurity construction in university.     

控制点CGCS2000坐标的联测及解求

CGCS2000坐标系是我国目前精度最高的坐标系,其推广使用具有重大意义。文中在安装并学习美国高精度GPS基线处理软件GAMIT软件基础上,以4个无坐标信息观测墩为例,进行观测数据采集与数据处理方案的设计,以期获取4个观测墩的CGCS2000坐标。最终结果表明,各质量指标均满足限差要求,且平差后最弱边中误差满足《工程测量规范》(GB50026-2007)三等工程控制网的要求。     

Improved multi-recessed 4H–SiC MESFETs with double-recessed p-buffer layer

An improved multi-recessed 4H–SiC metal semiconductor field effect transistor (MRD-MESFET) with double-recessed p-buffer layer (DRB-MESFET) is proposed in this paper. By introducing a double-recessed p-buffer layer, the gate depletion layer is further modulated, and higher drain saturation current and DC transconductance are obtained compared with the MRD-MESFET. The simulations show that the drain saturation current of the DRB-MESFET is about 42.4% larger than that of the MRD-MESFET. The DC transconductance of the DRB-MESFET is almost 15% higher than that of the MRD-MESFET and very close to that of double-recessed structure (DR-MESFET) at the bias conditions of V_gs=0 V and V_ds=40 V. The proposed structure has an improvement of 26.1% and 74.2% in the output maximum power density compared with that of the MRD-MESFET and DR-MESFET, respectively. In the meanwhile, the proposed structure possesses smaller gate-source capacitance, which results in better RF characteristics.     

Optimum design for unbonded posttensioned precast split shear wall system using genetic algorithm

Precast concrete structures are increasingly being adopted by building designers in regions of high seismicity. An unbonded posttensioned (PT) precast split shear wall system (UPPSSW) was proposed by the Precast Seismic Structural Systems (PRESSS). The UPPSSW system is composed of two or more single precast concrete wall panels that are connected together with energy‐dissipating shear connectors and anchored to the foundation with unbonded PT tendons located at the panel center. In this paper, an optimum design program has been developed for designing this system. The objective of the optimum process is to find the optimum combination between PT tendons and shear connectors while keeping the moment capacity of the wall equal to the applied design moment and achieving zero residual drift simultaneously. In addition, MATLAB was employed to explore an optimization program using genetic algorithm. Compared with the existing design methods for the system, the optimum design program proposed in this research is accurate, efficient, and direct. Moreover, it can yield the optimum design automatically and quickly. As a result, the existing lengthy and manual design process of trial and error for the system can be avoided.