气藏平均地层压力跟踪计算新方法

平均地层压力是产能评价和动态分析的基础，准确、快速获取平均地层压力对高效开发气藏意义重大。基于地层压力随时间变化的规律，分析了平均地层压力的变化规律。研究结果表明：平均地层压力等效点仅随时间发生改变，平均地层压力的下降速率等于或者近似等于井底流压的下降速率。从封闭弹性驱动气藏的物质平衡方程出发，考虑偏差系数和井底流压随平均地层压力的变化，推导建立了平均地层压力跟踪计算新方法，根据生产数据可迭代计算平均地层压力。方法验证结果显示，采气速度和采出程度共同影响模型的计算结果。应用实例表明，跟踪计算法与压力恢复试井和物质平衡法之间的相对误差均较小，满足工程计算精度要求，且跟踪计算法不需依托生产测试数据，节约了测试费用，避免了测试占产。     

Toughness enhancement and equivalent initial fracture toughness of cementitious composite reinforced with aligned steel fibres

Based on theoretical analysis and numerical simulation, the impact of steel fibres on the stress intensity factor (SIF) at the crack tip for cementitious composite was studied. The enhanced toughness of steel fibre reinforced cementitious composite (SFRC) in resisting cracks was explained by the decrement of SIF caused by steel fibre inclusions at the crack tip of the composite. The equivalent initial fracture toughness was used to characterize the crack initiation of SFRC. A simplified method for determining the of SFRC was proposed based on a linear regression method. Fracture tests were conducted on three‐point bending notched beams with different steel fibre volume fractions and specimen sizes to study the crack initiation behaviour of aligned steel fibre reinforced cementitious composite (ASFRC). of ASFRC was calculated, and the size effect of was analysed. The results showed that slightly increased with the steel fibre volume fraction and gradually became stable. For the tested specimens, whose heights varied between 40 and 100 mm, the specimen size had little impact on the .     

Topology optimization for crashworthiness of thin-walled structures under axial crash considering nonlinear plastic buckling and locations of plastic hinges

Although topology optimization is established for linear static problems, more effort is required for solving nonlinear plastic problems. A new topology optimization approach with equivalent static loads (ESLs) is suggested to find the optimum topologies and locations of plastic hinges of thin-walled crash boxes by considering crash-induced deformation, the main crash energy-absorbing mechanism. Together with finite element method crashworthiness analyses, considering all nonlinearities with rate-dependent plasticity, the method was developed using an appropriate time-incremental scheme of ESLs without removing any high values of loads. Analyses show that the crash boxes with optimum topologies have energy-absorbing capabilities equivalent to the original structure. The proposed method is evaluated for two crashes: a crash box at low speed and a double cell subjected to high-speed collision. The results indicate that this method captures nonlinear crushing behaviours and accurate locations of plastic hinges where, if proper reinforcements are made, energy absorption can be enhanced.     

Study on internal stress damage detection in long-distance oil and gas pipelines via weak magnetic method

Weak magnetic stress detection is an important issue in oil–gas pipeline internal detection area. In order to verify the characteristics of weak magnetic stress internal detection signals, we built herein a magneto-mechanics equivalent model having a balanced magnetic field. First, we calculated the relationship between the stress and the weak magnetic signals; consequently, the analysis propagation laws of the weak magnetic signals with non-magnetic saturation were pointed out. Finally, the theoretical model was validated by a systematic experimental research. The analytical results show that a one-to-one linear link between the weak magnetic signals and the stress concentration is clear. Instead, the change of the weak magnetic signals with the liftoff is nonlinear, therefore we are proposing the Boltzmann liftoff correction factor whose degree of adaptability of the equivalent model can reach the value of 94%. It is possible to note that when the liftoff is in the approximate linear stage, the relevance ratio and the recognition rate of the magneto-mechanics curve show a high-quality. This conclusion is important in the engineering field for the set of the liftoff.     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。     

基于流固耦合的柱面气膜密封支撑结构性能研究

利用流固耦合分析方法,研究一种波箔结构柔性支撑柱面气膜密封,探讨气膜厚度、浮环与转子的偏心率以及柔性支撑结构的泊松比、弹性模量、波箔数量等参数对支撑结构等效应力及变形量的影响。结果表明:柔性支承结构满足柱面气膜密封的正常运作,不会造成因为气膜刚度过大而使得浮环与波箔发生破坏性变形,并且变形量远小于波箔高度;柔性支撑的等效应力和变形量随平均气膜厚度的增大而减小,随偏心率的增加而增大,随支撑材料泊松比的增大而增大;弹性模量的增加并不影响柔性支撑结构的等效应力,但是会使变形量减小;增加波箔数量,柔性支撑的等效应力略有减小,变形量显著减小。     

高速列车转向架构架损伤、等效应力及寿命分布特性研究

为分析高速列车转向架构架损伤、等效应力及寿命分布特性，对构架疲劳关键测点进行动应力线路实测并对测点实测时域数据波形进行解析；基于实测应力时间历程及雨流计数法编制二维应力谱，利用Goodman等寿命方程将二维应力谱等效转换为一维应力谱；阐述线性累积损伤及非线性累积损伤模型的建立方法并对实测数据的线性累积损伤及非线性累积损伤进行了计算及对比分析；分别基于线性累积损伤理论及非线性累积损伤理论推导出各理论下的等效应力，基于实测数据对两种等效应力进行了计算及对比分析；通过结合非线性累积损伤及线性累积损伤理论计算的等效应力及不同可靠度下的材料S-N曲线计算并对比分析构架结构的疲劳寿命。研究结果表明，与非线性疲劳分析理论相比，线性疲劳分析理论对高速列车转向架构架的疲劳特性评估偏于保守。     

组合形活塞销冷镦挤成形工艺

针对组合形活塞销结构特征和工艺要求,分析该零件的成形难点为:两端圆锥孔的挤压成形和深径比大于2. 5的中心圆孔反挤压。为此,应用DEFORM-2D有限元分析软件对组合形活塞销7工位冷镦挤成形工艺进行数值模拟分析。通过数值模拟分析和工艺方案修订,确定最终的成形工艺方案为:下料-整形-压凹-反挤压-冲孔-第1次挤锥-第2次挤锥,并采用硬质合金YG15制造反挤压凸模,以避免一次反挤压成形时凸模横截面变化处的折断。采用该方案进行工艺实验,实验结果表明:组合形活塞销尺寸满足零件设计要求,无折叠、开裂等锻造缺陷,深孔反挤压凸模使用寿命大于8万件。     

Complementary characterization methods for Lithium-ion Polymer secondary battery modeling

This paper deals with the electrical modeling of Lithium-ion Polymer battery, from complementary characterization tests. The first aim of this work is to understand the electrical behavior of this battery through experimentations in the same environmental conditions as the final application’s ones. The second goal of this work is to identify battery models with different precision levels and to implement them in specific models of the considered aircraft electrical network. In this paper, two equivalent electrical circuit models are presented: a quasi-static model, which is functional and sufficient for the electrical energy management in the aircraft; a dynamic model, which is behavioral and necessary for the analysis of the embedded network quality. The identification of their parameters is carried out with adapted characterization tests, such as chronopotentiometry at constant current and Electrochemical Impedance Spectroscopy at different temperatures. The complementarity of these tests is particularly underlined in this paper because it is useful for the parameter identification. The results from model simulation and from experimentation are compared through a mission profile and are analyzed. Eventually, this paper presents complete experimental data for a commercial 4.8 Ah Lithium-ion Polymer battery including the temperature influence.