Structural and electrical studies of excessively Sm2O3 substituted soft PZT nanoceramics

The solid solution of Pb_1-x Sm_2x/3 (Zr_0.6 Ti_0.4) O₃ ceramics with x = 0.1, 0.2, 0.3, and 0.4 was prepared via the high-energy ball milling technique. Further, the effect of excessive Sm₂O₃ substitution at Pb-site on structural, dielectric, and dc-conductivity properties was studied. The X-ray diffraction (XRD) analysis confirmed that all samples were crystallized with perovskite and pyrochlore diphase form. Excess Sm³⁺ substitution in the PZT system increases the pyrochlore volume fraction from 5 to 20% and induces a structural phase transition from rhombohedral to a tetragonal structure. The microstructural study by TEM and SEM indicated that the particles were spherical with an average size of 43–55 nm. The frequency and temperature-dependent dielectric constant for all compositions was carried out and it is obtained that the dielectric constant decreases with Sm³⁺ content. The phase transition temperature first decreases up to x = 0.2 and then increases for the higher concentration of samarium. The dc-conductivity studies revealed that all samples showed an unusual mixed TCR effect (both positive and negative temperature coefficient of resistance). Such properties of the studied samples indicate that the material is suitable for potential applications in thermistors, and temperature sensors of the automotive, and petroleum industries.     

Melt processing and characterization of tricalcium phosphate filled polybutylene adipate-co-terephthalate/polymethyl methacrylate composites for biomedical applications

Abstract

PBAT/PMMA/MA/TCP composites were prepared by melt blending and characterized by FTIR, XRD, SEM and in vitro bioactivity studies using SBF and cell viability tests. SBF studies revealed good bioactivity nature which was observed in SEM and confirmed by EDAX. Cell viability test revealed an excellent viability of squamous cells within 2?h than the control. Soil burial tests of the composites show fast degradation within 50 days under natural conditions. The tensile and hardness properties is marginally increased than that of PBAT/PMMA blend. These biocomposites can be used for the fabrication of medical devices by melt blending and injection molding process.     

Influence of Ni ion site occupancy on laser induced third harmonic generation (THG) studies in Li2SO4–MgO–P2O5 amorphous system

Glasses of the composition Li₂SO₄–MgO–P₂O₅ mixed with varied contents (0.2–1.0 mol%) of nickel oxide were synthesized. Various spectroscopic investigations have indicated gradual growing proportions of O_h Ni²⁺ ions in the host glass. IR spectral results, in particular, have clearly demonstrated an increased degree of structural disorder of the glass nerwork with increased content of NiO. The intensity of third harmonic generation (THG) component of probing beam viz., Nd:YAG laser (λ = 1064 nm and power density J = 0–200 J/m²) induced due to the interaction of inherent dipoles with the incident laser beam, exhibited an increasing trend with increase of nickel oxide concentration up to 0.8 mol%. Analysis of the results of these studies indicated that Li₂SO₄–MgO–P₂O₅ glass samples doped with optimal content of NiO (~ 0.8 mol%) are more favorable for achieving intense THG beam with low phonon losses. Hence, such glasses may be considered as useful for optoelectronic devices. On the other hand, the samples doped with NiO content greater than 0.8 mol%, the Ni²⁺ ions seemed to prefer (revealed by optical absorption and IR spectroscopy studies) tetrahedral occupancy in the glass matrix and enhance the degree of the polymerization of the glass matrix; such increased order of polymerization of the glass matrix appears to be a hindrance for accomplishing higher intensity of THG signal due to large phonon losses. These results were found to be in concurrence with the inferences from other studies that include electrical properties, positron annihilation lifetime (PAL) spectroscopy and mechanical properties.     

Optimization of structural,electrical, and magnetic properties of ytterbium substituted W-type hexaferrite for multi-layer chip inductors

The rare earth (Yb³⁺) substituted W-type hexagonal ferrites with composition CaPb_2-xYb_xFe₁₆O₂₇ (x = 0.0, 0.5, 1.0, 1.5, 2.0) were synthesized by a facile and cost-effective sol-gel auto combustion method with post heat treatment. The synthesized hexagonal ferrites were characterized by a variety of analytical techniques, and an impedance analyzer was used to investigate the effects of Ytterbium on structural, magnetic, spectral and dielectric properties. The relationship between their impedance, structure and dielectric properties was investigated. The X-ray diffraction patterns verify the presence of single-phase W-type hexagonal ferrites. Physical properties such as D_bulk (bulk density), D_xrd (X-ray density), and P (porosity) of the CaPb_2-xYb_xFe₁₆O₂₇ W-type hexagonal ferrites were calculated. The bulk density of all the samples was decreased, and X-ray intensity was increased with the Ytterbium replacement in the W-type hexaferrite. By adding Yb³⁺ ions, the lattice parameters, cell volume and X-ray density were reduced due to the substitution of ytterbium with smaller ionic radii compared to the lead ion with large ionic radii. The AC-conductivity was increased from (1.523 × 10^?5 to 6.699 × 10^?5) Ωcm^?1. The dielectric constant and tangent loss was found to decrease substantially. The magnetic properties were found to enhance by the substitution of Yb³⁺. The low coercivity value of Yb³⁺ substituted W-type hexagonal ferrites are suitable for magnetic recording media operated at a high-frequency regime. The enhancement of electrical, dielectric and magnetic characteristics suggests these materials as promising for multi-layer chip inductors (MLCIs) circuit applications.     

Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

Twenty-five years of total antioxidant capacity measurement of foods and biological fluids: merits and limitations

This review summarises 25 years of investigations on antioxidants research in foods and biological fluids and critically analyses the merits and limitations of using the total antioxidant capacity (TAC) measurement in the metabolomic era. An enormous bulk of knowledge was produced regarding the antioxidant capacity of foods and large TAC databases were developed. A direct link between a food TAC value and any health benefit is erroneous and has led to several cases of consumer deception. However, the striking epidemiological evidence associating a high dietary TAC with some disease prevention and the availability of well-constructed TAC databases deserve attention and must be taken into account to establish the usefulness of measuring TAC in both foods and biological samples. The in vivo TAC measurement, usually performed in plasma, is influenced by many external factors, such as dietary habits, as well as environmental and behavioural factors, which are integrated towards homeostatic control by fine physiological mechanisms with high inter-individual variability. Therefore, plasma TAC cannot be considered as a unique biomarker of individual antioxidant status. However, the combined evaluation of plasma TAC with known markers of disease, individual metabolism, inflammation and genetics, as well as with markers of gut microbiota composition and activity, may lead to the identification of populations that are more responsive to food/diet TAC. In this framework, the appropriate use of TAC measurement both in food and in vivo can still provide support for the interpretation of complex phenomena and be a tool for sample screening when making a quick decision toward in-depth research investigations. © 2018 Society of Chemical Industry     

Report on inaugural workshop RSA ReHi-Network ‘Interdisciplinary connections between history & regional studies’*

The RSA Research Network on Regional Economic and Policy History (ReHi) aims to investigate the role of the historic perspective on regional studies through a series of events. During the inaugural two-day workshop, held in London in April 2017, the participants highlighted historical methodologies and approaches that establish a common thread in the various regional disciplines. They defined interdisciplinary connections that need to be addressed to overcome the discontinuous dialogue among researchers of regional studies and history. The research papers that were presented at the conference focused on improving methodologies, analysing economic strategies, developing techniques, and understanding policy development. The workshop aimed at establishing the foundation for a common research framework to improve the scientific debate and provide impact on regional policy regulations.     

Novel Positive Allosteric Modulators of µ Opioid Receptor—Insight from In Silico and In Vivo Studies

Opioids are the drugs of choice in severe pain management. Unfortunately, their use involves serious, potentially lethal side effects. Therefore, efforts in opioid drug design turn toward safer and more effective mechanisms, including allosteric modulation. In this study, molecular dynamics simulations in silico and ‘writhing’ tests in vivo were used to characterize potential allosteric mechanism of two previously reported compounds. The results suggest that investigated compounds bind to μ opioid receptor in an allosteric site, augmenting action of morphine at subeffective doses, and exerting antinociceptive effect alone at higher doses. Detailed analysis of in silico calculations suggests that first of the compounds behaves more like allosteric agonist, while the second compound acts mainly as a positive allosteric modulator.     

Corrosion behavior of Cu–Sn bronze alloys in simulated archeological soil media

The corrosion behavior of synthetic Cu–Sn bronze alloys with six different Sn contents was examined through an electrochemical test and a synthetic test in a simulated corrosive medium. The mechanism of corrosion and the morphology of the corroded surfaces were characterized through field emission scanning electron microscopy equipped with energy-dispersive spectroscopy. At the corrosion potential, the corrosion behavior appears to be determined by the charge transfer step and the diffusion process. It was found that the bronze-IV (Cu–26.8Sn) specimen exhibited the best corrosion resistance, as evidenced by a low corrosion current density and a high impedance. This improvement resulted from an increase in the content of the Cu–Sn solid solution in the alloy, which was conducive to forming a relatively more protective passive film on the surface of the bronze alloy. This finding would be valuable in the anticorrosion protection of archeological artefacts after their excavation.     

To the humanities: what does communication studies give?

ABSTRACT

This special issue of Review of Communication presents new offerings of the study of communication, forging present and future humanities. This Introduction engages the six essays in this special issue—which extend and intersect across categories of the humanistic study of communication: communication philosophy and ethics, rhetorical theory, history, pedagogy, criticism, and digital humanities—to explore their contributions in defense of the humanities. Taken together, these essays explore the study of communication as (1) a resource for inquiring and exchanging with concepts, practices, and embodiments of difference, the other, and the posthuman; (2) a means of examining the ontological, epistemological, technological, existential, performative, and ethical implications of our communicative being, our being constituted by symbolic action and mediated exchange in ever-present yet always variant material and affective environments, spaces, and places; (3) a discipline emerging from rhetoric, one of the original liberal arts, yet developing in transdisciplinary ways, transforming the binary of humanities and sciences; (4) a tool for decolonizing knowledge(s); (5) a tool for exploring, critiquing, engaging, and creating with the new media of our digital lives together; (6) a long-standing yet ever inventive method and mode for public humanities; and (7) a praxis of resistance. These essays bring to light what studying communication offers the humanities: a plural, public, reflexive, and ever inventive enterprise for examining being human together on this planet.