Electromagnetic transients in the control system of output parameters of a solar power plant in Tajikistan Central Asia region

At present, as the demand for electricity increases in all sectors, there is an urgent need to introduce alternative renewable energy sources into modern energy systems. Renewable energy sources, which consist of solar (photovoltaic, PV), wind and hydro power, are key alternative sources of “green energy’’ energies, but it can also be used to produce “green” hydrogen. Thanks to scientific and technological progress, the cost of photovoltaic solar radiation converters is constantly decreasing at a high rate, which makes it possible to build solar power plants of sufficiently large capacity. In the coming decades, solar energy will become an incentive for the economic development of countries that have the maximum “solar” resource. The Republic of Tajikistan is one of these countries with a high potential for solar energy.The article presents an analysis of the resources and potential of solar energy in the Republic of Tajikistan. The study of electromagnetic transients in networks with photovoltaic solar power plants is performed. The main equations, simulation model and calculations of transients are presented, taking into account changes in voltage on DC buses. An algorithm for controlling the system of automatic control of output parameters is proposed. The analysis of dynamic and static modes in parallel operation of a solar power plant with the grid is carried out. A block diagram and computer model is constructed in the MATLAB package together with Simulink and Power System Blockset.     

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.     

Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

Boccia game simulator: Serious game adapted for people with disabilities

Integration in the world of sport is one way for individuals with disabilities or motor disorders to feel more socially integrated, independent, and confident. Boccia is a Paralympic sport, which is increasingly getting more attention around the world. These facts have contributed to the objectives of this work. Including it in the serious games category enables to develop and rehabilitate the cognitive capabilities. The main focus was BC3 classification athletes (users with limited motor characteristics that require the use of an assistive device—a ramp, in this case). This paper describes a realistic Boccia game simulator adapted for people with disabilities that integrates a set of features that includes real physics and social features. These features can be used to enhance the interest of nonpractitioners of the sport and to improve the training conditions. The official Boccia regulation was added to the design of the simulator. The usability and approximation to the reality of the simulator were tested and validated based on the tests performed and data collected via a survey of users with no motor or psychological disorders. Realism and usability rating was almost excellent, and good results were achieved at the assessment of the game experience.     

毒品滥用流行病模型的稳定性分析

现有毒品滥用流行病模型假设吸毒者康复后对毒品拥有永久"免疫"力，而忽视了其再次成为毒品易感者的可能性。针对这一问题，通过考虑社区治疗和隔离治疗两种措施，分析了毒品滥用人群的演化过程，提出了基于暂时"免疫"力的毒品滥用流行病模型，并计算了模型的基本再生数，讨论了模型平衡点的存在性和稳定性。当基本再生数小于1时，模型存在一个局部渐进稳定的无毒平衡点；当基本再生数大于1时，模型存在唯一的地方病平衡点，并利用几何方法证明了地方病平衡点的全局稳定性；当基本再生数等于1时，如果满足一定条件，模型出现后向分支现象。数值模拟验证了上述所有结果。研究结果表明提高隔离治疗率、改善社区治疗效果和降低接触传染率可以有效抑制毒品滥用的流行。     

FDM 3D打印工艺参数对PLA制件力学性能的影响

采用五因素四水平正交试验设计,对16组不同工艺参数(打印层厚、填充密度、打印温度、填充速度、外壳厚度)的FDM 3D打印聚乳酸(PLA)制件力学性能进行了测试和结果分析,确定了影响PLA制件力学性能的主要因素,其中,外壳厚度对制件力学性能影响最为明显,打印温度影响最小,同时分析得到了在打印层厚0.15 mm,填充密度40%,打印温度210℃,填充速度60 mm/s,外壳厚度1.6 mm条件下可获得力学性能最佳的制件。最后对试验数据进行回归分析,拟合得到了FDM打印工艺参数与PLA制件力学性能指标的数学模型;通过对不同打印工艺参数的试样进行试验验证,表明该模型拟合误差小(5%以内),可靠性高,可用来对FDM 3D打印制件的加工提供参考。     

A study of A2/O process in El-Berka WWTP by replacing the anaerobic selector with UASB and adopting a hybrid system in the oxic zone

ABSTRACT

A multistage system comprising an upflow anaerobic sludge blanket (UASB) followed by anoxic unit and then oxic activated sludge (AS) with biofilm is studied in El-Berka WWTP, Egypt. Different organic loading wastewaters of chemical oxygen demand (COD) less than 500 mg/L till 3000 mg/L are tested during the study. The hydraulic retention time (HRT) varies for each loading from 7.5 to 10 to 15 h. The UASB reactor accomplishes the removal efficiency of 50%–70% of influent COD. The overall system performs the removal efficiency of 95% of influent COD and NH₄-N. Also, the results are verified by a modified mathematical model.     

锂离子在三维骨架复合锂金属负极中的沉积规律

锂金属具有极高的理论比容量和极低的氧化还原电极电势，成为了新一代高比能二次电池最理想的负极材料。然而，锂金属负极其走向大规模应用仍存在诸多问题与挑战。三维骨架复合负极可以控制金属锂均匀形核，低电流密度下均匀沉积，有望推动锂金属负极的实用化。为了更高效地指导锂金属负极设计和优化，采用相场理论，对三维骨架锂金属负极中比表面积对金属锂沉积过程的作用机制进行了定量分析和探究，发现了比表面积调控金属锂沉积的两阶段作用机理，并提出了基于比表面积参数的三维骨架负极设计与优化方向，从而最大程度发挥三维骨架在调控稳定金属锂负极上的积极作用。     

An immersive virtual reality serious game to enhance earthquake behavioral responses and post-earthquake evacuation preparedness in buildings

Enhancing the earthquake behavioral responses and post-earthquake evacuation preparedness of building occupants is beneficial to increasing their chances of survival and reducing casualties after the mainshock of an earthquake. Traditionally, training approaches such as seminars, posters, videos or drills are applied to enhance preparedness. However, they are not highly engaging and have limited sensory capabilities to mimic life-threatening scenarios for the purpose of training potential participants. Immersive Virtual Reality (IVR) and Serious Games (SG) as innovative digital technologies can be used to create training tools to overcome these limitations. In this study, we propose an IVR SG-based training system to improve earthquake behavioral responses and post-earthquake evacuation preparedness. Auckland City Hospital was chosen as a case study to test our IVR SG training system. A set of training objectives based on best evacuation practice has been identified and embedded into several training scenarios of the IVR SG. Hospital staff (healthcare and administrative professionals) and visitors were recruited as participants to be exposed to these training scenarios. Participants’ preparedness has been measured along two dimensions: 1) Knowledge about best evacuation practice; 2) Self-efficacy in dealing with earthquake emergencies. Assessment results showed that there was a significant knowledge and self-efficacy increase after the training. In addition, participants acknowledged that it was easy, helpful, and engaging to learn best evacuation practice knowledge through the IVR SG training system.