Photomemory and Pulse Monitoring Featured Solution-Processed Near-Infrared Graphene/Organic Phototransistor with Detectivity of 2.4 × 1013 Jones

Emerging graphene/organic phototransistors are eye-catching technologies owing to their unique merits including easy/low-cost fabrication, temperature independent, and achieving various functions. However, their development in the near-infrared (NIR) region is experiencing a bottleneck of inferior sensitivity due to low exciton dissociation efficiency and inefficient charge extraction rate. Here, a novel-design solution-processed graphene/organic NIR phototransistor is reported, that is, creatively introducing electron extraction layer of ZnO on graphene channel and employing organic ternary bulk heterojunction as photosensitive layer, successfully breaking that bottleneck. The phototransistor exhibits a high responsivity of 6.1 × 10⁶ A W⁻¹, a superior detectivity of 2.4 × 10¹³ Jones, and a remarkable minimum detection power of 1.75 nW cm⁻² under 850 nm radiation. Considering its excellent NIR detection performance, a noncontact transmission-type pulse monitoring is carried out with no external circuit support, from which human pulse signal and heart rate can be displayed in real time. The phototransistor, interestingly, can be switched into a photomemory function with a retention time of 1000 s in the atmosphere through a gate voltage of −20 V. The design takes the characteristics of graphene/organic phototransistors to a higher level, beyond the limit of sensitivity, and opens up a novel approach for developing multifunction devices.     

Microstructure,tribological behavior and magnetic properties of Fe−Ni−TiO2 composite coatings synthesized via pulse frequency variation

The Fe−Ni−TiO₂ nanocomposite coatings were electrodeposited by pulse frequency variation. The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at higher frequencies. By increasing the pulse frequency from 10 to 500 Hz, the iron and TiO₂ nanoparticles contentswere increased in expense of nickel content. XRD patterns showed that by increasing the frequency to 500 Hz, an enhancement ofBCC phase was observed and the grain size of deposits was reduced to 35 nm. The microhardness and the surface roughness were increased to 647 HV and 125 nm at 500 Hz due to the grain size reduction and higher incorporation of TiO₂ nanoparticles into the Fe−Ni matrix (5.13 wt.%). Moreover, the friction coefficient and wear rate values were decreased by increasing the pulse frequency;while the saturation magnetization and coercivity values of the composite deposits were increased.     

脉冲激光与电弧布置方式对铝合金焊接熔滴过渡与焊缝形貌的影响

以2219铝合金为基板，研究了不同脉冲激光-电弧布置方式下的熔滴过渡与焊缝形貌特征，分析了熔深增加的机理. 结果表明，当脉冲激光照射母材时，脉冲激光主要提供对母材的热输入，母材温度的增加有助于促进熔滴铺展，稳定熔滴过渡过程；当脉冲激光照射熔滴缩颈时，主要提供对熔滴的力输入，蒸发反力的作用下形成"一脉一滴"，显著提高熔滴过渡频率与熔滴飞行速度，增加了熔滴对熔池的冲击力，熔深增加；当脉冲激光交替的照射熔池和熔滴时，一方面能够对母材进行加热，有助于熔滴的铺展，另一方面能够提高熔滴过渡频率，提高焊缝的均匀性.     

Enhancement of optical emission generated from femtosecond double-pulse laser-induced glass plasma at different sample temperatures in air

In double-pulse laser-induced breakdown spectroscopy(DP-LIBS), the collinear femtosecond double-pulse laser configuration is experimentally investigated with different initial sample temperatures using a Ti:sapphire laser. The glass sample is ablated to produce the plasma spectroscopy. During the experiment, the detected spectral lines include two Na(I) lines(589.0 nm and 589.6 nm) and one Ca(I) line at the wavelength of 585.7 nm. The emission lines are measured at room temperature(22 ℃) and three higher initial sample temperatures(T_s?=?100 ℃, 200 ℃, and 250 ℃). The inter-pulse delay time ranges from-250 ps to 250 ps.The inter-pulse delay time and the sample temperature strongly influence the spectral intensity,and the spectral intensity can be significantly enhanced by increasing the sample temperature and selecting the optimized inter-pulse time. For the same inter-pulse time of 0 ps(single-pulse LIBS), the enhancement ratio is approximately 2.5 at T_s?=?200 ℃ compared with that obtained at T_s?=?22 ℃. For the same inter-pulse time of 150 ps, the enhancement ratio can be up to 4 at T_s?=?200 ℃ compared with that obtained at T_s?=?22 ℃. The combined enhancement effects of the different initial sample temperatures and the double-pulse configuration in femtosecond LIBS are much stronger than that of the different initial sample temperatures or the double-pulse configuration only.     

金属O形环密封结构的泄漏模型研究

基于分形理论的金属垫片泄漏模型,改进了密封面的接触模型,综合考虑了密封面微凸体的完全弹性、第一弹塑性、第二弹塑性和微凸体大小分布的域扩展因子;分析金属O形环密封接触宽度与设计压缩率的关系,推导出金属O形环密封结构的泄漏模型,并进行验证分析。结果表明:压缩率在一定范围内,接触宽度随压缩率的增加而逐渐增加;但当压缩率超过一定值后,O形环发生塌陷,导致接触宽度迅速减小;各压缩率下计算得到的泄漏率与试验结果在同一量级,说明建立的泄漏模型适用于金属O形环密封结构泄漏率的预测。     

基于神经网络算法的井下裂缝诊断与堵漏技术

在钻井过程中，常常钻遇不同宽度的井下地层裂缝。钻遇裂缝时容易发生钻井液漏失现象，甚至发生钻井液失返现象，严重影响了安全、高效钻井。目前裂缝封堵的方法常存在封堵成功率不高、堵漏承压能力低的问题，其中一个重要的原因是对井下地层的裂缝宽度等特征认识不清。基于地层裂缝产生的岩石力学机理，确定影响裂缝宽度关键的6个力学和工程因素，并利用神经网络计算的非线性、大数据特点建立了井下地层裂缝宽度的分析模型，模型包含输入层、输出层和3个隐藏层。通过该模型诊断井下裂缝宽度，提高了计算精度，平均误差仅为2.09%，最大误差为5.88%，解决钻井现场仅凭经验判断裂缝误差较大和依靠成像测井成本较高的问题。同时根据神经网络模型诊断得到的裂缝宽度优化堵漏材料的粒径配比，提高了裂缝内的架桥封堵强度和架桥的稳定性，封堵层的承压能力达到12.8 MPa，反向承压能力达到4.5 MPa。现场堵漏试验最高憋压10 MPa，经过封堵作业后大排量循环不漏，达到了裂缝性地层高效堵漏的目的，堵漏一次成功。      

雷电通道水平电场影响因素分析

影响雷电通道产生的水平电场因素众多,分析其影响因素对电力系统的雷电防护具有重要意义。文中利用运动电荷电磁场方程求解得到闪电回击通道的水平电场和方位磁场,并结合C-R 算法,得到了有限电导率地面上方的水平电场。依据运动电荷电磁场方程的特征分析了不同回击速度、不同距离、不同电导率对雷击产生的水平电场的影响。得出以下结论:水平电场随回击速度增大而减小;水平电场波形呈双极性特征且水平距离越大或电导率越小负向偏移越明显。这些研究结论为输电线路雷电过电压计算打下良好的基础。与其他方法相比,本文方法可以避免远距离电磁场计算中的震荡问题和积分方程的奇异问题。     

基于一种改进逐点比较插补法的激光打标机控制加工算法

在激光打标系统中,逐点比较插补法是一种普遍使用的算法。这种算法在控制激光运动轨迹和对图像轨迹的拟合过程中,起到极其重要的作用。由于逐点比较插补法具有运算直观,脉冲输出均匀,调节方便等特点,所以是一种较为适合打标机系统应用的插补算法。但是传统的逐点比较插补算法存在精度低和速度慢等问题。为了改善该算法的性能,对传统逐点比较插补算法进行了改进,并进行了计算和模拟仿真。结果表明改进比较插补算法在精度和速度上都有明显提高。