Comparison of Bougainvillea spectabilis and Bougainvillea glabra species inhibited in Pakistan based on microscopic studies: Light microscope and scanning electron microscope

The anatomical variations of two plants from the Nyctaginaceae family, Bougainvillea spectabilis and Bougainvillea glabra, were studied using light and scanning electron microscopy methods in this work. Bougainvillea is a dicotyledonous with defensive traits that can withstand extreme (hot and dry) settings; according to the findings, crystal inclusions in cells, woody spines, and an abnormal development pattern are all features that help them survive against predators and are unique to this species. The Bougainvillea plant's leaves are arranged in simple pattern, alternate to each other along stem having an undulate leaves edge and an oval form. The xylem and phloem, palisade, parenchyma midrib, spongy mesophyll, raphide crystal bundles, and trichomes were all visible when bracts and leaves were transversally sectioned and dyed with toluidine blue O (TBO). The presence of crystals was confirmed by a detailed examination of the transverse leaves by using bright-field and cross-polarizing microscopy. Dissecting microscopic examination showed that all the leaves revealed leaves venation pattern that had midvein, lateral veins areoles, and trichomes. Although trichomes have been identified on both sides, a closer look at a cleaned leaf dyed with TBO showed multicellular abundant trichomes on adaxial surface. Stomata complexes were typically found on the abaxial surface of the leaf according to epidermal peels. Present studies also showed that on adaxial side, stomata were lesser in number or were absent and also showed that the morphologies of the pavement cells on the adaxial and abaxial sides of the leaf differed.     

Designing amorphous formulations of polyphenols with naringin by spray-drying for enhanced solubility and permeability

Naringin (NAR), a major flavanone (FVA) glycoside, is a component of food mainly obtained from grapefruit. We used NAR as a food additive to improve the solubility and permeability of hydrophobic polyphenols used as supplements in the food industry. The spray-dried particles (SDPs) of NAR alone show an amorphous state with a glass transition temperature (T_g) at 93.2 °C. SDPs of hydrophobic polyphenols, such as flavone (FVO), quercetin (QCT), naringenin (NRG), and resveratrol (RVT) were prepared by adding varying amounts of NAR. All SDPs of hydrophobic polyphenols with added NAR were in an amorphous state with a single T_g, but SDPs of hydrophobic polyphenols without added NAR showed diffraction peaks derived from each crystal. The SDPs with NAR could keep an amorphous state after storage at a high humidity condition for one month, except for SDPs of RVT/NAR. SDPs with NAR enhanced the solubility of hydrophobic polyphenols, especially NRG solubility, which was enhanced more than 9 times compared to NRG crystal. The enhanced solubility resulted in the increased membrane permeability of NRG. The antioxidant effect of the hydrophobic NRG was also enhanced by the synergetic effect of NAR. The findings demonstrated that NAR could be used as a food additive to enhance the solubility and membrane permeability of hydrophobic polyphenols.     

Nucleation‐controlled dual semicrystalline morphology of polyamide 11

Crystallization of polyamide 11 at low supercooling of the melt proceeds via heterogeneous nucleation and spherulitic growth of lamellae, while at temperatures close to the glass transition homogeneous nucleation prevails, preventing spherulite formation and leading to formation of a large number of nanometer‐sized mesophase domains. It is shown that spherulitic and non‐spherulitic crystallization at low and high supercooling of the melt, respectively, can be enforced by tailoring the cooling conditions, causing a twofold semicrystalline morphology at ambient temperature. Analysis of non‐isothermal crystallization as a function of the cooling rate, using fast scanning chip calorimetry, reveals that in the case of polyamide 11 such twofold semicrystalline morphology is predicted when cooling at rates between about 20 and 200 K s^?1, since then two separate crystallization events are observed. The prediction has been confirmed by preparation of films crystallized during ballistic cooling at different rates which then were analyzed regarding their structure using optical microscopy, X‐ray diffraction and calorimetry. The study is completed by discussion of implications of twofold non‐isothermal crystallization for structure evolution in polymer processing, as well as by providing information that such behavior is not only typical for polyamide 11 but also for isotactic polypropylene or poly(butylene terephthalate) as two further examples. © 2018 Society of Chemical Industry     

The use of recycled low-density polyethylene films from protective prepreg for the development of nanocomposites with bentonite clay

Prepreg is a pre-impregnated composite fiber where a thermoset polymer matrix material is present. Before being used, these materials are kept at low temperatures and have a low-density polyethylene (LDPE) film for your protection. The increase in the use of structural composites based on prepregs causes an increase in the amount of protective LDPE film. This material is usually discarded or incinerated and can cause great damage to the environment. Thus, the present work aimed to study the feasibility of recycling up to 100% of protective LDPE (rLDPE) to develop blends-based nanocomposites with rLDPE/virgin LDPE (60/40, 70/30, 80/20, 90/10 and 100/0) with the addition of 5 wt% of compatibilizer agent (maleic anhydride grafted LDPE, LDPE-g-MA), and 1 wt% of bentonite (BNT) using a co-rotational twin-screw extruder, followed by hot pressing in a hydropneumatic press and die-cutting. Water absorption test, thermal aging resistance, morphological characterization by scanning electron microscopy, mechanical properties by Izod impact strength and tensile tests, and differential scanning calorimetry were performed. By the results, it was possible to verify the viability of 100% of the recycling of rLDPE. The results showed a good distribution of 1 wt% of BNT in the matrix, better mechanical properties when compared with virgin LDPE. Furthermore, the thermal properties, water absorption test, and thermal aging resistance showed no statistical differences between the samples. These results confirm the effectiveness and the environmental gain in the use of the recycled material.     

激光立体成形TC4钛合金的热力场演化

激光立体成形能够实现高性能复杂零件的精确成形，但成形过程中的高温度梯度极易导致残余应力和变形，最终影响构件的几何精度和力学性能。通过搭建基板单边夹持原位热变形测量系统，探究了多道多层TC4钛合金成形件在激光立体成形过程中基板温度、变形的演化规律，分析了不同扫描策略对构件热应力场的影响。研究结果表明，构件的变形发展受其热历史驱使，扫描策略对成形件的热变形具有显著影响。     

老矿山残矿资源回收方案设计中三维探测及建模技术的应用

目前我国绝大多数中小型老矿山残矿回收面临一系列问题，包括资料缺失无法准确判定老采空区及剩余资源位置，无法准确掌握剩余资源形态及可回收量，回收方案设计与实际资源相差较大等。通过将三维探测及建模技术应用于老矿山残矿资源精准定位及回收方案设计中，有助于解决以上问题。以福建浦城屏峰硫铅锌矿为例，通过对老采空区采用三维激光扫描构建采空区三维模型，结合三维建模计算，构建了目前可回收的剩余资源三维模型。通过模型划分及切割，按照矿体实际形态，在三维模型中布设采切及穿孔工程，并将其导入平面施工图中，不仅可以减少设计工作量，而且能够精准匹配矿体，减少设计偏差。由于周边存在大量老采空区，为保障安全，在采空区及剩余资源精准三维模型的基础上，制定了采空区稳定性监测方案，布设了监测传感器，保障了资源回收安全。     

罗河铁矿采空区三维激光扫描及应用分析研究

针对传统采空区探测依靠全站仪测量存在劳动强度大、测量结果不准确等问题,采用BLSS-PE矿用三维激光扫描系统对罗河铁矿45-3^#和47-3^#采空区进行了现场扫描,构建了采空区三维实体模型,并在此基础上计算了采空区体积,说明了传统统计方式存在的不足;计算了矿房的超欠挖体积,为准确量化矿房损失率和贫化率提供了基础数据;基于采空区边界进行了二步骤回采设计,说明了采空区边界对于降低矿房损失贫化的重要意义。