Direct ink writing of vancomycin-loaded polycaprolactone/ polyethylene oxide/ hydroxyapatite 3D scaffolds

Novel inks were formulated by dissolving polycaprolactone (PCL), a hydrophobic polymer, in organic solvent systems; polyethylene oxide (PEO) was incorporated to extend the range of hydrophilicity of the system. Hydroxyapatite (HAp) with a weight ratio of 55–85% was added to the polymer-based solution to mimic the material composition of natural bone tissue. The direct ink writing (DIW) technique was applied to extrude the formulated inks to fabricate the predesigned tissue scaffold structures; the influence of HAp concentration was investigated. The results indicate that in comparison to other inks containing HAp (55%, 75%, and 85%w/w), the ink containing 65% w/w HAp had faster ink recovery behavior; the fabricated scaffold had a rougher surface as well as better mechanical properties and wettability. It is noted that the 65% w/w HAp concentration is similar to the inorganic composition of natural bone tissue. The elastic modulus values of PCL/PEO/HAp scaffolds were in the range of 4–12 MPa; the values were dependent on the HAp concentration. Furthermore, vancomycin as a model drug was successfully encapsulated in the PCL/PEO/HAp composite scaffold for drug release applications. This paper presents novel drug-loaded PCL/PEO/HAp inks for 3D scaffold fabrication using the DIW printing technique for potential bone scaffold applications.     

Direct writing of textured ceramics using anisotropic nozzles

Direct writing is a unique means to align anisotropic particles for the fabrication of textured ceramics by templated grain growth (TGG). We show that alignment of tabular barium titanate (BT) template particles (20–40 μm width and 0.5–2 μm thickness) in a PIN-PMN-PT matrix powder (d₅₀ = 280 nm) is significantly improved during direct writing using anisotropic nozzles at high printing rates. The particle orientation distribution in as-printed filaments, and the texture orientation distribution in sintered ceramic filaments are shown to directly correlate with COMSOL Multiphysics-predicted torque distributions for direct writing with aspect ratio 2, 3 and 5 oval nozzles. Electromechanical strain properties of the textured piezoelectric ceramics significantly improved relative to random ceramics when printed with anisotropic nozzles. Simulations of aspect ratio 20 nozzles and nozzles with interior baffles demonstrate significantly increased torque and near elimination of constant shear stress cores (i.e. plug flow).     

Flexible electronic skin with high performance pressure sensing based on PVDF/rGO/BaTiO3 composite thin film

The wearable intelligent electronic product similar to electronic skin has a great application prospect. However, flexible electronic with high performance pressure sensing functions are still facing great challenges. In this paper, the highly sensitive flexible electronic skin (FES) based on the PVDF/rGO/BaTiO₃ composite thin film was fabricated using the near-field electrohydrodynamic direct-writing (NFEDW) method. The PVDF/rGO/BaTiO₃ composite solution was directly written on flexible substrate by the NFEDW method to fabricate FES with micro/nano fiber structure, which has the function of sensing pressure with high sensitivity and fast response. The surface morphology and microstructure were characterized by SEM, AFM, and optical microscope in detail. The fabricated FES has high sensitivity (59 kPa⁻¹) and faster response time (130 ms). FES has been successfully applied to the detection of human motion and subtle physiological signals. The experimental results show that FES has good stability and reliability. FES can recognize human motion, and it has a broad application prospect in the field of wearable devices.     

Cognitive and affective processes for learning science in immersive virtual reality

As immersive virtual reality (IVR) systems proliferate in classrooms, it is important to understand how they affect learning outcomes and the underlying affective and cognitive processes that may cause these outcomes. Proponents argue that IVR could improve learning by increasing positive affective and cognitive processing, thereby supporting improved performance on tests of learning outcome, whereas opponents of IVR contend that it could hurt learning by increasing distraction, thereby disrupting cognitive learning processes and leading to poorer learning outcomes. In a media comparison study, students viewed a biology lesson either as an interactive animated journey in IVR or as a slideshow on a desktop monitor. Those who viewed the IVR lesson performed significantly worse on transfer tests, reported higher emotional arousal, reported more extraneous cognitive load and showed less engagement based on EEG measures than those who viewed the slideshow lesson, with or without practice questions added to the lessons. Mediational analyses showed that the lower retention scores for the IVR lesson were related to an increase in self-reported extraneous cognitive load and emotional arousal. These results support the notion that immersive environments create high affective and cognitive distraction, which leads to poorer learning outcomes than desktop environments.     

Applied data science in patient-centric healthcare: Adaptive analytic systems for empowering physicians and patients

We define the emerging research field of applied data science as the knowledge discovery process in which analytic systems are designed and evaluated to improve the daily practices of domain experts. We investigate adaptive analytic systems as a novel research perspective of the three intertwining aspects within the knowledge discovery process in healthcare: domain and data understanding for physician- and patient-centric healthcare, data preprocessing and modelling using natural language processing and (big) data analytic techniques, and model evaluation and knowledge deployment through information infrastructures. We align these knowledge discovery aspects with the design science research steps of problem investigation, treatment design, and treatment validation, respectively. We note that the adaptive component in healthcare system prototypes may translate to data-driven personalisation aspects including personalised medicine. We explore how applied data science for patient-centric healthcare can thus empower physicians and patients to more effectively and efficiently improve healthcare. We propose meta-algorithmic modelling as a solution-oriented design science research framework in alignment with the knowledge discovery process to address the three key dilemmas in the emerging “post-algorithmic era” of data science: depth versus breadth, selection versus configuration, and accuracy versus transparency.     

数字花卉植物的全息可视化与交互实现

花卉植物形态、结构与生长过程的数字化和可视化是现代林业科研的重要研究内 容，数字花卉植物在科普、教育、展示等方面都有着广泛的应用与需求。全息影像技术是一种 新兴的前沿技术，其原理源自佩珀尔幻象，通常用于生成立体感强的影像，实现数字幻象与真 实世界的融合，拥有良好的观赏性，用户接受度较高。将全息影像技术与数字花卉植物相关研 究进行结合，可以加强数字花卉植物的可视化效果，从而实现更好的科普、教育、展示效果。 因此在现有的研究基础之上，考虑实现数字花卉植物的全息可视化，并在可视基础上增加了用 户交互实现，设计出一套兼具展示性和交互性的流程，力求总结出一种具有完整可行性的方案， 从而对数字花卉植物的新型表现形式进行深入研究，以期对数字植物研究与应用的进一步发展 提供参考。     

Soft Matter Technology at KIT: Chemical Perspective from Nanoarchitectures to Microstructures

Bioinspiration has emerged as an important design principle in the rapidly growing field of materials science and especially its subarea, soft matter science. For example, biological cells form hierarchically organized tissues that not only are optimized and designed for durability, but also have to adapt to their external environment, undergo self‐repair, and perform many highly complex functions. Being able to create artificial soft materials that mimic those highly complex functions will enable future materials applications. Herein, soft matter technologies that are used to realize bioinspired material structures are described, and potential pathways to integrate these into a comprehensive soft matter research environment are addressed. Solutions become available because soft matter technologies are benefitting from the synergies between organic synthesis, polymer chemistry, and materials science.     

Misconceptions of human factors concepts

Abstract

Like many scientific topics, Human Factors, and Ergonomics concepts are susceptible to being misunderstood by people unfamiliar with the subject matter. Most of the time these misunderstandings are harmless, like when a safety poster within a work setting encourages employees to 'overcome complacency'. This misunderstanding of complacency suggests it is a motivational aspect of human behaviour correctable with encouragement, whereas the human factors approach to overcoming complacency would be to evaluate how task design could diminish the destructive consequences of unexpected changes within a routine setting. No harm comes from the message within the safety poster, other than some wasted ink and paper, but misconceptions among particular audiences can eventually result in dire consequences for the human operator. This paper presents recent evidence that the concepts are being misapplied by casual consumers of human factors, particularly in the aftermath of accidents within complex systems, in ways detrimental to the core mission of improving the well-being of the human operator. Later, because this special issue presents new ways to demonstrate value via return on investment, practical efforts we can take to overcome such misconceptions are suggested.