三维石墨烯-碳纳米管/水泥净浆的压敏性能

为了探索三维石墨烯-碳纳米管(G-CNTs)/水泥净浆的压敏性能,采用四电极法研究了荷载作用下GCNTs/水泥净浆的电阻率变化,并分析不同G-CNTs掺量、加载幅度、加载速度以及恒定荷载对电阻率变化的影响。研究表明:随着G-CNTs掺量的增加,电阻率呈先减小后稳定的变化趋势,在G-CNTs掺量由0.2wt%增加至1.6wt%时,电阻率下降51.8%;电阻率与温度呈负相关;G-CNTs掺量高于0.8wt%时可以显著提高水泥净浆的压敏性能,且电阻率变化率与应力应变有明显的对应关系,1.2wt%G-CNTs掺量下试件的应力灵敏系数和应变灵敏系数分别为2.3%/MPa和291;G-CNTs/水泥净浆电阻率变化率幅值随着加载幅度增大而相应增加,其电阻率变化率曲线在不同加载速度以及恒定荷载作用下均与应力-应变曲线一一对应,具有良好的压敏特性。     

Weighted regularized extreme learning machine to model the discharge coefficient of side slots

In the current research, a modern learning machine algorithm named “Weighted Regularized Extreme Learning Machine (WRELM)" is implemented for the first time for the simulation of the coefficient of discharge of side slots. For this purpose, an effective variable on the coefficient of discharge of side slots is firstly introduced, then five distinctive WRELM models are produced by it for the estimation of the coefficient. In the next stage, a database is created for verification of WRELM results. it should be mentioned that 70% of the data are utilized for training the WRELM models, while the rest (i.e. 30%) for testing them. After that, the optimal number of hidden layer neurons as well as the best activation function of the WRELM algorithm are chosen. In addition, the best regularization parameter and also the weight function of the WRELM are achieved. By conducting a sensitivity analysis, the most effective variable for the simulation of the coefficient of discharge along with the WRELM superior model is introduced. The WRELM superior model estimates values of the coefficient of discharge with the maximum exactness and the highest correlation. For instance, the estimations of the correlation coefficient and scatter index for this model are computed to be 0.930 and 0.051, respectively. The sensitivity analysis shows that the ratio of the side slot crest height to its length and the Froude number should be considered as the most important input variables. A comparison between the WRELM with the ELM displays that the former works much better. Furthermore, an uncertainty analysis is executed for both models. Eventually, an equation is suggested for the estimation of the coefficient of discharge and a partial derivative sensitivity analysis is performed on it.     

无黏土相盐水储层钻开液体系构建及其抗污染性能评价

采用NaCl/KCl/HCOONa复配欠饱和盐水作为钻开液的基础液相,自研的聚合物VIS-B作为流型调节剂,可酸溶的改性淀粉STA作为体系的降失水剂,Dua及Jqw作为暂堵材料,构建了一套无黏土相钻开液体系。该体系在密度1.10~1.28 g/cm^3间稳定可调,抗温可达130℃,具有较高的低剪切速率黏度和较好的润滑性能,且能有效抵抗各类储层污染物的污染,满足了Missan油田不同储层段的作业需求。     

还原温度对氧化石墨烯的湿度-甲醛交叉敏感性能的影响

以氧化石墨烯溶胶为前体，通过旋涂工艺制备薄膜型气敏元件，在低温80～180℃下进行热处理，获得系列不同还原程度的还原氧化石墨烯气敏元件，采用XRD、AFM、FT-IR、XPS对样品的层结构、薄膜厚度及含氧官能团变化属性进行表征，将气敏薄膜元件在相对湿度为11.3%～93.6%的范围内进行预湿处理，并测定元件对甲醛气氛的敏感性能。结果表明：随热还原处理温度的升高，氧化石墨烯的结构逐渐向类石墨结构转变，含氧官能团逐渐脱失，缺陷增多，薄膜的方块电阻呈数量级地减小，从41 MΩ减小至928 Ω；经不同湿度预处理的气敏元件置于甲醛气氛中产生了水分子与甲醛分子的竞争吸附，从而导致电阻的明显变化；在10^?4甲醛气氛下，未还原或热还原温度较低的气敏元件适用于低、高湿环境下甲醛气氛的气敏测试，最大灵敏度为69.1%，而还原温度适中的元件则适用于中湿环境的甲醛测试，最大灵敏度为80.3%。     

Y4.67Si3O13-based phosphors: Structure,morphology and upconversion luminescence for optical thermometry

How to improve the sensitivity of the temperature-sensing luminescent materials is one of the most important objects currently. In this work, to obtain high sensitivity and learn the corresponding mechanism, the rare earth (RE) ions doped Y_4.67Si₃O₁₃ (YS) phosphors were developed by solid-state reaction. The phase purity, structure, morphology and luminescence characteristics were evaluated by XRD, TEM, emission spectra, etc. The change of the optical bandgaps between the host and RE-doped phosphors was found, agreeing with the calculation results based on density-functional theory. The temperature-dependence of the upconversion (UC) luminescence revealed that a linear relationship exists between the fluorescence intensity ratio of Ho³⁺ and temperature. The theoretical resolution was evaluated. High absolute (0.083 K⁻¹) and relative (3.53% K⁻¹ at 293 K) sensitivities have been gained in the YS:1%Ho³⁺, 10%Yb³⁺. The effect of the Yb³⁺ doping concentration and pump power on the sensitivities was discussed. The pump-power–dependence of the UC luminescence indicated the main mechanism for high sensitivities in the YS:1%Ho³⁺, 10%Yb³⁺. Moreover, the decay-lifetime based temperature sensing was also evaluated. The above results imply that the present phosphors could be promising candidates for temperature sensors, and the proposed strategies are instructive in exploring other new temperature sensing luminescent materials.     

High strain rate compressive response of the Cf/SiC composite

Carbon fiber reinforced ceramic owns the properties of lightweight, high fracture toughness, excellent shock resistance, and thus overcomes ceramic's brittleness. The researches on the advanced structure of astronautics, marine have exclusively evaluated the quasi-static mechanical response of carbon fiber reinforced ceramics, while few investigations are available in the open literature regarding elastodynamics. This paper reports the dynamic compressive responses of a carbon fiber reinforced silicon carbide (C_f/SiC) composite (CFCMC) tested by the material test system 801 machine (MTS) and the split Hopkinson pressure bar (SHPB). These tests were to determine the rate dependent compression response and high strain rate failure mechanism of the C_f/SiC composite in in-plane and out-plane directions. The in-plane compressive strain rates are from 0.001 to 2200?s^?1, and that of the out-plane direction are from 0.001 to 2400?s^?1. The compressive stress-strain curves show the C_f/SiC composite has a property of strain rate sensitivity in both directions while under high strain rate loadings. Its compressive stiffness, compressive stress, and corresponding strain are also strain rate sensitive. The compressive damage morphologies after high strain rate impacting show different failure modes for each loading direction. This study provides knowledge about elastodynamics of fiber-reinforced ceramics and extends their design criterion with a reliable evaluation while applying in the scenario of loading high strain rate.     

气藏型储气库注气期试井分析探讨

针对气藏型储气库注采井注采过程中储层物性参数影响因素不明确、注采能力不对称的问题。基于相国寺储气库井下连续油管试井测试结果,提出储气库注气期“温降效应”、“变表皮效应”的概念,分析了储气库注采过程中温降效应、变表皮效应以及储层应力敏感对注采的影响。通过气藏型储气库注气期试井分析技术,研究各因素在试井曲线上的响应特征以及对试井解释参数的影响。结果表明:①相对于采气期试井测试,注气期测试得到的储层物性参数具有同样的参考价值;②储气库温降效应对于试井解释结果的影响可忽略不计,而在不同注采运行周期内,变表皮效应以及应力敏感效应影响差异较大;③编制储气库注采运行方案时应充分考虑变表皮效应与应力敏感的影响,在不同注采运行周期内开展试井测试获取准确的储层参数值。研究成果为储气库试井测试与解释提供了重要的研究依据和理论指导。     

蜂窝梁的稳定性能研究进展

对蜂窝梁破坏模式的研究表明，失稳是其结构性能失效的重要破坏模式。为此，在回顾蜂窝梁结构特性研究的基础上，总结归纳了蜂窝梁失稳的3种主要模式：整体弯扭失稳、梁墩屈曲、畸变屈曲。结合国内外近30多年来对蜂窝梁稳定性的试验研究成果，对影响蜂窝梁稳定性的主要因素进行分析。采用蒙特卡洛法得到纯弯简支蜂窝梁弯扭失稳临界荷载的概率分布和影响因子的敏感度。将部分具有代表性的试验成果与欧洲规范EN 1993-1-1计算结果进行对比，根据中国规范GB 50068—2001《建筑结构可靠度设计统一标准》提供的抗力分项系数，计算了不同荷载组合下蜂窝梁整体弯扭失稳临界荷载的可靠度指标，为国内规范的制订提供依据。最后，总结了当前蜂窝梁稳定性研究中存在的不足，指明了进一步研究的方向。     

Enhanced Sensitivity in Nanopore Sensing of Cancer Biomarkers in Human Blood via Click Chemistry

Cancer biomarkers are expected to be indicative of the occurrence of certain cancer diseases before the tumors form and metastasize. However, many biomarkers can only be acquired in extremely low concentrations, which are often beyond the limit of detection (LOD) of current instruments and technologies. A practical strategy for nanopore sensing of cancer biomarkers in raw human blood down to the femtomolar level is developed here. This strategy first converts the detection of cancer biomarkers to the quantification of copper ions by conducting a sandwich assay involving copper oxide nanoparticles. The released Cu²⁺ is then taken to catalyze the “click” reaction which ligates a host–guest modified DNA probe. Finally, this DNA probe is subjected to single‐channel recordings to afford the translocation events that can be used to derive the concentrations of the original biomarkers. Due to the amplification effects of nanoparticle loadings and the “click” reaction, the LOD of this strategy can be as low as the subfemtomolar level. Further, the acid treatment step could effectively eliminate the interferences from plasma proteins in raw human blood and make the strategy highly suitable for the detection of cancer biomarkers in clinical samples.