无保护间隔的OFDM信道自适应均衡的一种新算法

近年来作为一种特殊的多载波调制方式——正交频分复用(OFDM)已得到越来越多的人的关注.对于传统的OFDM系统来说,如果循环前缀的长度大于信道的时延扩散值,则可以通过简单的频域均衡来解调OFDM信号.可是循环前缀的使用却降低了系统的传输效率,如果能压缩甚至去掉循环前缀,而保持系统性能不变,则是很有意义的,为此本文给出了一种新的均衡结构,利用循环迭代手段以减少甚至去掉循环前缀,最后通过计算机模拟,证实了这种结构的有效性.     

多码CDMA系统中联合并行干扰抵消与迭代信道估计方法

本文针对多码CDMA系统提出了一种联合并行干扰抵消与迭代信道估计方法。该方法首先通过导频符号对信道进行估计，然后使用RAKE接收机后的软信息对信道参数进行修正，最后通过并行干扰抵消(PIC)去除多码干扰(MCI)。仿真结果表明，经过多次迭代后，该方法可显著地降低多码CDMA系统的误比特率平台。本文同时还给出了信道估计质量、码道数和PIC次数对多码CDMA系统性能的影响。     

MC-CDMA系统迭代检测中的一种信道估计算法

在DS—CDMA系统中，联合译码的迭代多用户检测是克服多址干扰增加系统容量的有效方法。本文将多用户检测和译码相结合的迭代检测技术应用于MC—CDMA系统，其中，多用户检测器由串行干扰消除和其后的MMSE滤波器组成。文中提出一种时域信道估计作为迭代初始值的频域信道估计算法，比单纯的频域信道估计方法节约导频符号数量，并且由于信道估计性能的改善，加快了迭代检测的收敛速度。     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Zero aliasing ROM BIST

Signature analyzers are very efficient output response compactors for BIST design. The only limitation of signature analysis is the fault coverage reduction (aliasing) due to the information loss inherent to any data compaction. In this article, in order to increase the effectiveness of ROM BIST, we take advantage from the simplicity of the error patterns generated by ROMs and we show that aliasing free signature analysis can be achieved in ROM BIST.This work was performed when the author was on leave from Minsk Radio Engineering Institute, Computer Department, Belorus.     

射频放大器互调失真检测和载波抵消的研究

采用高功率射频信号内部互调失真的包络特性检测与比较技术,对射频功率带外信号进行检测和估计。设计用于高功率射频放大器前馈技术线性化的一个带外信号检测器。探讨如何进行射频载波抵消以及检测放大器互调失真信号。     

基于参考模型的自适应话音处理

本文讨论了一种带有参考通道的自适应话音消噪滤波器原理，该滤波器采用最小均方差(心幅)算法。将此滤波器应用于复杂噪音背景的话音信号提取，能很好地抑制背景噪声，从而获得清晰的话音信号。     

一种频率估计的倍频等长信号加权融合算法

提出一种新型加权融合算法.首先,根据倍频等长信号间频率的倍数生成倍频修正矩阵,对倍频等长信号频谱进行同频化处理,使之达到同频等长信号频谱的分析效果.然后,针对倍频等长信号的相位不连续问题,设计具有相位连续特性和噪声对消特性的相位补偿矩阵,对同频化的倍频等长信号频谱进行加权融合,使之近似达到与倍频等长信号长度相同的相位连续信号频谱的分析效果.最后,通过谱峰搜索加权融合频谱获得高精度的频率估计值.算法分析与仿真实验表明:与现有方法相比,本算法精度较高,计算量较小,抗噪性强,普适性好.     

基于Turbo码的OFDM-IDMA系统干扰消除算法

基于交织多址系统,通过分析串行干扰消除和并行干扰消除两种方式的结构特点和纠错性能,结合两者优势,给出适用于OFDM-IDMA技术的串并结合干扰消除方式。通过构建等效的信道传输模型,在Turbo编码和OFDM条件下,将串并结合干扰消除方式与传统串行干扰消除方式进行性能对比。仿真结果表明,采用串并结合干扰消除技术的OFDM-IDMA系统,能够以较少的纠错性能损失为代价实现低时延多用户通信的目的。