Real‐time thermal states monitoring of absorber tube for parabolic trough solar collector with non‐uniform solar flux

With the world energy shortage problem becoming increasingly prominent, more and more attentions have been paid to the development of renewable energies. Among these sources, solar energy has received extensive attention with its excellent characteristics. The thermal state affects the safety of the solar heat collection system. In this paper, real‐time monitoring of the input heat flux on the inside wall and the temperature field simultaneously of an absorber tube for parabolic trough solar collector were studied. Based on the measured temperatures on the outside wall, the fuzzy adaptive Kalman filter coupled with weighted recursive least squares algorithm (WRLSA) was employed to monitor the heat states of the absorber tube inversely, in which WRLSA was used to acquire the heat flux while fuzzy adaptive Kalman filter was adopted to monitor the temperature field. The method showed strong robustness to resist the ill‐posedness. Accurate monitoring results also can be acquired when there are random disturbances of the heat transfer condition on the inner wall.     

太赫兹可调谐滤波器设计

为了实现太赫兹信号的可调谐滤波，设计了一种基于柔性材料的太赫兹可调谐滤波器。通过扭曲特氟龙（Teflon）波导形成环型谐振器，实现了160～200 GHz频段的带阻滤波功能。改变谐振腔长可实现自由频谱范围（FSR）和滤波频点的调谐，实验测试了自由频谱范围在1.9 GHz和2.8 GHz间切换以及相应的滤波特性。研究表明，谐振腔长一定时，改变弯曲半径可实现滤波阻带抑制度的调节，柔性材料太赫兹环型谐振器可用于可调谐滤波，且具有较高的自由度。     

基于太赫兹光谱的人参和西洋参鉴别

为了快速区分人参和西洋参，依据两者所含的人参皂苷在太赫兹波段具有不同指纹光谱，提出了一种基于人参皂苷的太赫兹光谱鉴别人参和西洋参的方法。采用MATLAB软件识别人参和西洋参的太赫兹光谱，同时根据太赫兹光谱特征并通过标准的主成分分析(PCA)区分出人参、西洋参。实验结果表明，基于太赫兹光谱的主成分分析可精确区分出人参、西洋参，并且还可以应用于其他类似物质的区分中。     

多层圆片级堆叠THz硅微波导结构的制作

基于微电子机械系统(MEMS)工艺,提出一种多层圆片堆叠的THz硅微波导结构及其制作方法。为了验证该结构在制作THz无源器件中的优势,基于6层圆片堆叠的硅微波导结构,设计了一种中心频率365 GHz、带宽80 GHz的功率分配/合成结构,并对其进行了仿真。研究了制作该结构的工艺流程,攻克了工艺过程中的关键技术,包括硅深槽刻蚀技术和多层热压键合技术,并给出了工艺结果。最终实现了多层圆片堆叠功率分配/合成结构的工艺制作和测试。测试结果表明,尽管样品的插入损耗较仿真值增加3 dB左右,考虑到加工误差和夹具损耗等情况,样品主要技术指标与设计值较为一致。     

Active Packaging Applications for Food

The traditional role of food packaging is continuing to evolve in response to changing market needs. Current drivers such as consumer's demand for safer, “healthier,” and higher‐quality foods, ideally with a long shelf‐life; the demand for convenient and transparent packaging, and the preference for more sustainable packaging materials, have led to the development of new packaging technologies, such as active packaging (AP). As defined in the European regulation (EC) No 450/2009, AP systems are designed to “deliberately incorporate components that would release or absorb substances into or from the packaged food or the environment surrounding the food.” Active packaging materials are thereby “intended to extend the shelf‐life or to maintain or improve the condition of packaged food.” Although extensive research on AP technologies is being undertaken, many of these technologies have not yet been implemented successfully in commercial food packaging systems. Broad communication of their benefits in food product applications will facilitate the successful development and market introduction. In this review, an overview of AP technologies, such as antimicrobial, antioxidant or carbon dioxide‐releasing systems, and systems absorbing oxygen, moisture or ethylene, is provided, and, in particular, scientific publications illustrating the benefits of such technologies for specific food products are reviewed. Furthermore, the challenges in applying such AP technologies to food systems and the anticipated direction of future developments are discussed. This review will provide food and packaging scientists with a thorough understanding of the benefits of AP technologies when applied to specific foods and hence can assist in accelerating commercial adoption.     

Design of switchable band‐notched frequency selective absorber

An active band‐notched frequency selective absorber (BNFSA) with switchable notch band is proposed in this article. The BNFSA is a two‐layer structure composed of a lossy layer at the top and a ground plane at the bottom, separated by an air spacer. The element of the lossy layer is a lumped‐resistor‐loaded metallic dipole with a parallel LC resonance structure, which is realized by complementary n‐shaped resonator (CnR) inserted in the center, and PIN diode is welded at two arms of CnR. The bias circuit printed on the back of the substrate of the lossy layer connects to anode and cathode of the diode by via hole and isolates by the inductor. Simulation results show that the notch bands are located at 4.50 and 6.81 GHz when the diode sets to ON and OFF, respectively. To validate the performance of switchable BNFSA, the prototypes are fabricated and measured, reasonable agreement between simulated and measured results is obtained.     

Fabrication and properties of Co:MgAl2O4 transparent ceramics for a saturable absorber from coprecipitated nanopowder

The 0.05 at.% Co:MgAl₂O₄ precursor was synthesized by the coprecipitation method from a mixed solution of magnesium, aluminum, and cobalt nitrates using ammonium carbonate as the precipitant. 0.05 at.% Co:MgAl₂O₄ transparent ceramics were successfully obtained via vacuum sintering and hot isostatic pressing (HIP) of 0.05 at.% Co:MgAl₂O₄ nanopowder calcined at 1100°C for 4 hours. The properties of powder and ceramics were comprehensively investigated. X-ray diffraction (XRD) results showed that Co:MgAl₂O₄ nanopowder had a pure spinel phase. Also, the in-line transmittances of the HIP posttreated Co:MgAl₂O₄ ceramics with the thickness of 1.2 mm were 82% at 400 nm and 84.7% at 900 nm. The average grain sizes of 0.05 at.% Co:MgAl₂O₄ ceramics before and after the HIP posttreatment were 11 and 28 μm, respectively. The calculated ground state absorption cross section of 0.05 at.% Co:MgAl₂O₄ ceramics was 2.9 × 10⁻¹⁹ cm², indicating that this ceramics is a promising material applied as a saturable absorber for passive laser Q-switches in the 1.3-1.7 μm domain.     

基于超材料的无标记光学生物传感

超材料(metamaterials)因为能够在亚波长尺度范围内精细调控电磁波而受到人们广泛关注。超材料具有丰富的电磁模态,在表面支持高度局域场增强且对周围介电环境极其敏感,可应用于无标记光学生物传感领域。与传统光学生物传感器相比,超材料生物传感器具有小型化、集成化、高度灵敏、多功能可定制等突出优点。本文总结了近年来超材料生物传感器在可见光、近红外、中红外以及太赫兹波段的研究进展,包括折射率生物传感、表面增强拉曼散射、表面增强红外吸收和太赫兹生物传感等。     

A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.     

液压缸非线性弹簧力约束下轧机吸振器参数的优化

考虑四辊轧机液压缸非线性弹簧力约束的因素,引入吸振器控制装置,建立带有轧机吸振器的轧机辊系振动动力学模型;通过对轧机吸振器基本参数的优化,得出吸振器最优的阻尼系数和刚度系数;仿真分析不同质量、弹簧力、摩擦力对轧机辊系振动幅频特性曲线的影响规律,得到轧机吸振器的最优质量可以有效提高系统稳定性,轧机吸振器的最优弹簧力可以缩小系统的不稳定区域,轧机吸振器的最优摩擦力可以有效降低幅频特性曲线的高度,为有效抑制轧机辊系垂直振动提供理论支持。