S/Se dual-doping promotes the formation of active Ni/Fe oxyhydroxide for oxygen evolution reaction of (sea)water splitting

Surface reconstruction produces metal oxyhydroxide (1OOH) active sites, and promoting surface reconstruction is essential for the design of OER electrocatalysts. In this paper, we reported that a large amount of active NiFeOOH was generated in-situ on the surface of nickel-iron sulfide selenide, thus exposing more active sites and efficiently catalyzing OER. In 1 M KOH solution, NiFeOOH(S,Se) achieves an ultra-low overpotential of 195 mV at the current density of 10 mA cm^?2, and the Tafel slope is only 31.99 mV dec^?1, showing excellent catalytic performance. When the current density is 100  mA cm^?2, the over-potential of NiFeOOH(S,Se) in KOH + seawater solution is 239 mV, which is almost equivalent to 231 mV in KOH solution. The excellent OER stability of the NiFeOOH(S,Se) catalyst in alkaline electrolytes was confirmed, and the overpotential did not change significantly after 4 days of testing in KOH + seawater solution.     

Wavelength-dependent photoactivity of ZnxCd1−xS and ZnCo2O4/ZnxCd1−xS for H2 and H2O2 production

Zinc cadmium sulfide (Zn_xCd_1?xS) is a good photocatalyst for hydrogen evolution reaction (HER), but an optimum x (x_m) at which a maximum HER rate is reached varies from one report to another. In this work, we examine the effect of light wavelength, not only for the HER to H₂ in the presence of Na₂S and Na₂SO₃, but also for oxygen reduction reaction (ORR) without addition of any sacrifices. For the HER under a 365 and 420 nm LED lamp, the x_m were 0.9 and 0.7, respectively. For the HER under a 330 and 395–515 nm cut-off xenon lamp, the x_m were 0.7 and 0.5, respectively. For the ORR under a 420 nm cut-off halogen lamp, a maximum production of H₂O₂ was observed at x = 0.3. Furthermore, after 4% ZnCo₂O₄ loading, Zn_xCd_1?xS had an increased activity and stability, either for the HER or for the ORR. Through a (photo)electrochemical measurement, it is proposed that the photocatalytic activity of Zn_xCd_1?xS is determined by its light absorptivity and electron reactivity. The improved performance of n-type Zn_xCd_1?xS by p-type ZnCo₂O₄ is due to formation of a p-n junction, promoting the HER (ORR) on Zn_xCd_1?xS, and the sulfide (water) oxidation on ZnCo₂O₄. This work highlights that Zn_xCd_1-xS is a promising photocatalyst for H₂ and H₂O₂ production, respectively.     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

华北地区含硫化氢地下储气库脱硫运行技术

为了进一步推动国内含H_2S地下储气库的优化运行,以华北地区X地下储气库为例,为防止其运行过程中采出的天然气因含H_2S引发的安全问题,提出了有针对性的脱硫运行技术对策。主要包括:井筒抗硫技术、含硫气井井口失控远程点火技术和地面H_2S处理技术。地下选用国产宝钢生产的D114.3 mm BGT1气密封型防硫化氢螺纹油管及耐压强度达34.5 MPa的井下安全阀。对含硫井口配备失控远程点火系统。在地面主要采用"活性炭+脱硫剂"分层装填脱硫塔的方式实现采出混合气体脱硫,并结合储气库井受双向压力及井底热传导效应促进硫溶解。通过摸索并实施一系列针对性的技术对策,X储气库完全自主实现零事故安全运行,为类似地下储气库的建设及运行提供了一定的参考。     

镁对非调质钢中组织及硫化物的影响

摘要：为了探究不同镁含量对非调质钢中组织和硫化物形态、尺寸、分布及成分的影响，采用蔡司金相显微镜、扫描电子显微镜、小样电解等方法，分析了经高温电阻炉冶炼不同镁添加量的49MnVS3非调质钢。结果表明，由于镁蒸气压较高，在实验室冶炼中大量挥发，导致钢中镁的实际平均收得率仅为310%；镁的质量分数为0～22×10-6时，随着镁的质量分数的增加，钢中硫化物形态由Ⅱ类逐渐向Ⅰ类、Ⅲ类转变；钢中硫化物尺寸增大，硫化物的分布均匀性得到显著改善；钢中复合夹杂物比例明显增加，但MnS的比例出现下降；形成了细小弥散的氧化物，增加了奥氏体形核质点，具有细化组织的趋势。     

Tuning effect of silicon substitution on magnetic and high frequency electromagnetic properties of R2Fe17 and their composites

In this work, we report the tuning effect of the Si substitution on the magnetic and high frequency electromagnetic properties of R₂Fe₁₇ compounds and their paraffin composites. It is found that the introduction of Si can remarkably improve the magnetic and electromagnetic properties of the R₂Fe₁₇ compounds, making the R₂Fe_17–xSi_x-paraffin composites excellent microwave absorption materials (MAMs). By introducing the Si element, their saturation magnetizations decrease slightly, while much higher Curie temperatures are obtained. Furthermore, better impedance match is reached due to the decrease of the high-frequency permittivity ε′ by about 40%–50%, which finally enhances the performance of the microwave absorption. The peak frequency (f_RL) of the reflection loss (RL) curve moves toward high frequency domain and the qualified bandwidth (QB, RL ≤ ?10 dB) increases remarkably. The maximum QB of 3.3 GHz (12.0–15.3 GHz) is obtained for the Sm_1.5Y_0.5Fe₁₅Si₂-paraffin composite (d = 1.0 mm) and the maximum RL of ?53.6 dB is achieved for Nd₂Fe₁₅Si₂-paraffin composite (d = 2.2 mm), both surpassing most of the reported MAMs. Additionally, a distinguished dielectric microwave absorption peak is observed, which further increases the QB in these composites.     

MOF-derived PPy/carbon-coated copper sulfide ceramic nanocomposite as high-performance electrode for supercapacitor

To obtain a battery-type ceramic electrode material for supercapacitors, we used a metal-organic framework (HKUST-1) as a template to prepare ceramic material Cu₉S₈@C. Firstly, we adopted the calcination–vulcanization method to synthesize Cu₉S₈@C. Then we deposited it onto a carbon fiber cloth and employed it. Moreover, polypyrrole PPy/Cu₉S₈@C-CC nanocomposite electrodes were prepared via electrochemical deposition. By means of high-temperature calcination and vulcanization, the copper atoms of HKUST-1 were successfully transformed into Cu₉S₈ nanoparticles, and the organic ligand was carbonized into amorphous carbon in Cu₉S₈@C. The results showed that the PPy/Cu₉S₈@C-CC electrode presented a specific capacitance of 270.72F/g at a scan speed of 10 mV/s in a 1 M KCL aqueous solution. This value was much higher than that of Cu₉S₈@C-CC and Cu₉S₈-CC electrodes, as confirmed by the results of electrochemical test. At a scan rate of 10 mV/s, the capacitance retention rate for PPy/Cu₉S₈@C-CC after 3000 cycles was 80.36%, indicating its superior cycle characteristics. Moreover, PPy/Cu₉S₈@C-CC exhibited good frequency response. These results indicate that PPy/Cu₉S₈@C is an ideal electrode material for energy storage and conversion applications.     

Nitrogen-doped graphene-supported zinc sulfide nanorods as efficient Pt-free for visible-light photocatalytic hydrogen production

Nitrogen-doped graphene-ZnS composite (NG-ZnS) was synthesized by thermal treatment of graphene-ZnS composite (G-ZnS) in NH₃ medium. In the second step, the as-synthesized samples were deposited on indium tin oxide glass (ITO) by electrophoretic deposition for photocatalytic hydrogen evolution reaction. The as-prepared NG-ZnS-modified ITO electrode displayed excellent photocatalytic activity, rapid transient photocurrent response, superior stability and high recyclability compared to the pure ZnS and G-ZnS-modified ITO electrode due to the synergy between the photocatalytic activity of ZnS nanorods and the large surface area and high conductivity of N-graphene.